• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.161-166
• /
• 2002

The resent experimental study is focused on the application of multi-point simultaneous measurement by PIV Particle Image Velocimetry) to guide vane region within diffuser pump. Various different kinds of rotational veto ity and changing clearance between Guide Vane and Impeller were selected as experimental condition. Optimized ross correlation identification to obtain velocity vectors is implemented with direct calculation of correlation coeffi cients. Fine optical setup concerned with PW performance is arranged for the accurate PW measurement of high peed complex flow. Variable flow pattern are represented quantitatively at the stator region.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.75-81
• /
• 2017

Recently in the welding field, the establishment of unmanned and automated systems are rapidly developing. Accurate interpretation of the welding phenomenon is applied a number of monitoring systems. In this paper, butt welding (6t) type I using Plasma-MIG welding was carried out. And we evaluated characteristics of the Al-5083 aluminium alloy in Plasma-MIG hybrid welding. Process variables including the plasma current, MIG voltage, wire feeding rate and the welding speed were used. Butt welding was conducted 1 pass. Argon gas was used as the protective gas that results from the experiment were able to achieve full penetration. In addition to monitoring the welding process occurring during MIG welding current, welding votage and Plasma current, voltage were collected in real time, the photodiode and CCD cameras observing the phenomenon that the welding is in progress were measured using a quantity of light.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2469-2475
• /
• 2014

1990년대 들어서, 국내 건물의 리모델링, 보수 및 유지관리의 증가에 따라 앵커의 사용량도 서서히 증가하고 있다. 콘크리트 앵커볼트의 설계에 $45^{\circ}$ 콘파괴 이론이 그동안 적용되어 왔으나, 2000년 이후부터 CCD(concrete capacity design) 방법이 새로운 설계법으로 도입되었다. 그러나 본 방법은 주로 선설치 콘크리트 앵커볼트에 대한 실험 결과에 근거한 관계로 모든 앵커볼트에 적용하기에는 많은 한계를 갖고 있다. 본 연구에서는 연단거리, 앵커간격 및 콘크리트 강도를 변수로 한 후설치 콘크리트 세트앵커의 인발파괴실험을 통하여 무근콘크리트에 매입된 후설치 세트앵커의 인발특성에 미치는 영향을 규명하는 것을 그 목적으로 한다.

• 한국지능시스템학회논문지
• /
• 제7권4호
• /
• pp.9-17
• /
• 1997

본 논문에서는 유해 물질에 인간보다 더욱 민감하게 반응하는 어류의 움직임을 분석하여 수질의 상태를 감시하는 시스템에 대하여 기술한다. 자동수질감시 시스템(Water Quality Inspection System, WQIS)은 CCD 카메라를 이용하여 컬러 영상을 획득하고, 획득된 영상에서 어류들의 영역을 분할한다음, 몇개의 이전 프레임과 현재 프레임에서 얻어진 각각의 어류들의 위치를 이용하여 어류의 움직임을 묘사한다. 본 논문에서는 어류 행동 패턴을 반영하는 다섯 가지 유형의 특징을 정의하였다. 부유성(floatness), 회피성(fledness), 군집성(clusterness), 확산성(diffusiveness), 이동성(mobility), 이와같은 어류의 행동 패턴을 반영하는 특징들을 이용하여 퍼지 추론을 수행하고 그 결과에 따라서 현재 유해물질이 유입되고 있는지 여부를 판단한다. 본 논문에서 기술되는 WQIS은 호수 관리, 폐수 관리, 하천 관리 등과 같은 분야에 적용되어 오염물질의 유입과 같은 환경사고를 사전에 예방하는 데 사용될 수 있으리라 본다.

• 한국화재소방학회논문지
• /
• 제14권3호
• /
• pp.13-18
• /
• 2000

본 연구의 목적은 물액적에 의한 미연소면의 냉각 특성을 연구하는 것이다. 고온고체로는 황동, 탄소강, 동을 사용하였으며 온도범위는 $70^{\circ}$~$116^{\circ}$이다. 액적의 직경은 2.4 mm~3.0 mm로 하였다. CCD카메라를 이용하여 액적의 증발과성을 기록하였으며, 증발시간은 비디오에 기록된 프레임을 분신하여 추하였다. 열전도도가 가장 큰 동의 경우 액적이 떨어진 직후 조금 냉각되었다가 일정 온도를 유지하지만 열전도도가 낯은 탄소강의 경우는 증발시간 동안 약 $1^{\circ}$ 정도의 온도 기울기가 나타났다. 고체 표면에서의 액적 증발시 무차원 액적체적은 가열체의 재질에 상관없이 무차원 증밭시간이 증가할수록 선형적으로 감소한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.219-222
• /
• 2014

The flame chemiluminescence is a good tracer of flame statement. In this study, the characteristics of flame chemiluminescence($OH^*$, $CH^*$, ${C_2}^*$) according different measuring locations using photomultiplier(PMT), spectrometer and CCD camera. Measurements are made for $OH^*$, $CH^*$, ${C_2}^*$ radicals in gas & light oil diffusion flames. At turbulent nonpremixed combustion mode, the equivalence ratio is varied. The experimental results showed that measuring location affects the result of flame chemiluminescence.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.216-221
• /
• 2002

A spherical Earth surface is used fur realistic analysis of the geometrical performance characteristics about the variation of satellite altitude and 2-dimensional line-of-sight(LOS) tilt angle in a satellite imager using Time Delay and Integration(TDI) technique with fixed integration time. In the spherical Earth surface model TDI synchronization using LOS tilt is investigated as a solution to compensate geometric performance degradation due to altitude decrease. This result can be used fur a TDI CCD imager with variable integration time in a certain as well.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.678-683
• /
• 2003

Mixers are used in various industrial fields where it is necessary to intimately mix two reactants in a short period of time. However, despite their widespread use, complex unsteady flow characteristics of industrial mixers are not systematic investigated. The present study aimed to clarify unsteady flow characteristics induced by various impellers in a tank. Impellers are pitched blade turbine and neo-hydrofoil turbine types. A high speed CCD camera and an Ar-Ion laser for illumination were adopted to clarify the time-dependent flow characteristics of the mixers. The rotating speed of impellers increased from 6Hz to 60Hz by 6Hz. The maximum velocity around PBT impeller is higher than the hydrofoil type impeller. These two types of turbine shows that typical flow characteristics of axial turbine and suitable for mixing high -viscosity materials.

• 천문학회보
• /
• 제35권1호
• /
• pp.38.2-38.2
• /
• 2010

We report the current status of CQUEAN (Camera for QUasars in EArly uNiverse) development. CQUEAN is an optical CCD camera which uses a 1024*1024 pixel deep-depletion CCD. It has an enhanced QE than conventional CCD at wavelength band around 1${\mu}m$, thus it will be an efficient tool for observation of quasars at z > 7. It will be attached to the 2.1m telescope at McDonald Observatory, USA. A telescope interface containing a focal reducer is being designed to secure a larger field of view at the cassegrain focus of 2.1m telescope. Instrument control software will be written with python on linux platform. We are carrying out lab tests to investigate the characteristics of the system components in order to maximize the observational efficiency. Preliminary results of the tests will be presented. CQUEAN is expected to see the first light during summer season of 2010.

• 천문학회지
• /
• 제50권3호
• /
• pp.71-78
• /
• 2017

We present the characteristics and the performance of the new CCD camera system, SNUCAM-II (Seoul National University CAMera system II) that was installed on the Lee Sang Gak Telescope (LSGT) at the Siding Spring Observatory in 2016. SNUCAM-II consists of a deep depletion chip covering a wide wavelength from $0.3{\mu}m$ to $1.1{\mu}m$ with high sensitivity (QE at > 80% over 0.4 to $0.9{\mu}m$). It is equipped with the SDSS ugriz filters and 13 medium band width (50 nm) filters, enabling us to study spectral energy distributions (SEDs) of diverse objects from extragalactic sources to solar system objects. On LSGT, SNUCAM-II offers $15.7{\times}15.7$ arcmin field-of-view (FOV) at a pixel scale of 0.92 arcsec and a limiting magnitude of g = 19.91 AB mag and z=18.20 AB mag at $5{\sigma}$ with 180 sec exposure time for point source detection.