• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.55-62
• /
• 2001

We present VRI CCD photometry of W UMa type binary TY UMa. The light curves show that the secondary minimum is deeper than the primary minimum and the maximum I ($0.^{p}25$)is $0.^{m}023$ brighter than the maximum II ($0.^{p}75$). The V light curve has been analyzed and the photometric solutions have been determined by the method of Wilson & Devinney differential correction. We adopted the spot model to explain the asymetric light curve.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.259-269
• /
• 1999

A new algorithm for measuring 3-D velocity components of high speed flows were developed using a digital image processing technique. The measuring system consists of three CCD cameras an optical instrument called AOM a digital image grabber and a host computer. The images of mov-ing particles arranged spatially on a rotation plate are taken by two or three CCD cameras and are recorderd onto the image grabber or a video tape recoder. The three-dimensionl velocity com-ponents of the particles are automatically obtained by the developed algorithm In order to verify the validity of this technique three-dimensional velocity data sets obtained from a computer simu-lation of a backward facing step flow were used as test data for the algorithm. an uncertainty analysis associated with the present algorithm is systematically evaluated, The present technique is proved to be used as a tookl for the measurement of unsteady three-dimensional fluid flows.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.856-860
• /
• 2006

A CCD camera is used to determine the position of the point sources that influence the measurement accuracy in the absolute interferometer. The principle of determination method is based on the GPS in which the position is determined by more than 3 distance information from the known positions. Two-dimensional array of photo-detectors in the CCD camera is used as known positions. Performing optimization of the cost function constructed with phase values measured at each pixel on the CCD camera, the position coordinates of each source is precisely determined.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.69-77
• /
• 1993

Investigation is given to the detailed procedure of a computer assisted automatic correction for scanning errors of the digital images of close-range photographs scanned by the CCD camera scanner. After determination of the exterior orientation parameters, photo coordinates of the all pixels were calculated using collinearity equation. For the generation of geometric corrected image from the photo coordinates of the all pixels, inverse-weighted-distance average method was used. And the accuracy of the resulting new image was checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.55.3-55.3
• /
• 2015

한국천문연구원에서 개발 중인 KMTNet 망원경은 2014년 칠레(5월), 남아공(8월), 호주(11월)에 설치가 완료되었다. 망원경 설치 이후, 연구관측용 광시야 18k CCD 카메라를 설치하기 전까지의 기간 동안 시험관측용 4k CCD 카메라(STX-16803)를 활용하여 관측을 수행하였다. 시험관측 대상으로는 KMTNet의 주 관측 영역인 우리은하 팽대부처럼 별이 밀집된 영역에서 영상차감법(Difference Image Analysis; DIA)을 활용해 변광하는 천체를 찾기 위해 $25^{\prime}{\times}25^{\prime}$의 CCD 관측 영역에 적당한 6개의 남반구 구상성단을 선정하였다. 본 발표에서는 관측된 성단의 측광 결과와 영상차감법을 이용해 찾은 변광성에 대해 논의할 예정이다.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.160-165
• /
• 1998

Current discriminating technique of rice variety is known to be not objective till this time because of depending on naked eye of well trained inspector. DNA finger print method based on genetic character of rice has been indicated inappropriate for on-site application, because the method need much labor and skilled expert. The purpose of this study was to develops the identification technique of polished rice varieties using CCD camera images. To minimize the noise of the captured image, thresholding and median filtering were carried out, and edge was extracted from the image data. Image data after pretreatment of normalize and FFT(fast fourier transform) were used for library model and feedforward backpropagation neural network model. Image processing technique using CCD camera could discriminate the variety of rice with high accuracy in case of quite different rice of shape, but the accuracy was reached at 85% in the similar shape of rice.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.5
• /
• pp.368-373
• /
• 2003

This paper presents a cost-effective 3D foot scanner system that provides the 3-dimensional point cloud foot data to design the custom footwear. To measure the 3-dimensional point cloud data of the foot, a CCD camera, a Non-Gaussian laser line projector and optical triangulation method are employed. Furthermore, the integrated system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and a computer. The measurement result is saved as 3D dxf format and it could be converted to 2D essential data fer a shoe design. The experimental results demonstrate that the proposed system have the decent resolution of 1mm which is enough for last and shoe design.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.248-252
• /
• 2002

Many sensors such as a structured grid pattern generator, a laser, and CCD camera to information have been used, but most of algorithms for a calibration are inefficient memory and experiment data are required. In this paper, the calibration algorithm of a structured grid pattern based on triang is introduced to calculate 3D information in the real world. The beams generated from str pattern generator established horizontally with the CCD camera are projected on the calibn CCD camera observes the intersection plane of a light and an object plane. The 3D infon calculated using observed and calibration data. This proposed method in this paper has advantages such as a memory saving and an experimental data since the 3D information are obtained simply triangulation method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.139-144
• /
• 2014

As a result of a mismatch of the residual stress between both sides of the silicon wafer, which warps and distorts during the patterning process. The accuracy of the warpage measurement is related to the calibration. A CCD camera was used for the calibration. Performing optimization of the error function constructed with phase values measured at each pixel on the CCD camera, the coordinates of each light source can be precisely determined. Measurement results after calibration was performed to determine the warpage of the silicon wafer demonstrate that the maximum discrepancy is $5.6{\mu}m$ with a standard deviation of $1.5{\mu}m$ in comparison with the test results obtained by using a Form TalySurf instrument.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.210-217
• /
• 2000

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and it's high sensitivity. Especially when projecting a grid pattern over the object, the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, the projection moire are compared with the PMP mathematically, and it is shown that PMP can generate moire image with simple mathematical computations. Experimental works are also carried out showing the same results. It is shown that using a single gird pattern, moire image can be obtained directly without any mathematical operation when some conditions are satisfied.