• Progress in Superconductivity and Cryogenics
• /
• v.24 no.1
• /
• pp.13-17
• /
• 2022

The mechanical properties of REBCO coated conductor (CC) tapes under uniaxial tension are mainly determined by the thick layer Components like the substrate and the stabilizer. Depending on the applications of the CC tapes, it is also needed to externally reinforce thin metallic foils to one side or both sides of the CC tapes. This study investigated the effect of additional stabilizer layers or lamination on the electrical resistivity and electromechanical properties in RCE-DR processed GdBCO CC tapes with different structures. The strain/stress tolerance of I_c in differently processed 12 mm-wide REBCO CC tapes under uniaxial tension at 77 K and self-field could be determined by the loading-unloading scheme. As a result, Sn-Cu stabilized CC tape showed a significant decrease in mechanical properties due to its soft but thick stabilizing layer. However, similar electromechanical properties have been observed on both Sn-Cu and Sn-stabilized CC tapes, the I_c degradation behavior was independent of whether the CC tape has an external reinforcement or different stabilizing layers.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.109.1-109
• /
• 2003

From the PMMV (pepper mild mottle virus)-inducible ESTs differentially expressed in Capsicum chinense PI257284, we isolated a full-length cDNA (CcPHZF： Capsicum chinense phenazine), encoding a phenazine biosynthesis protein which catalyzes the hydroxylation of phenozine-1-carboxylic acid to 2-hydroxyphenazine-1-carboxylic acid. Phenazine compound has been known to exhibit broad-spectrum of antibiotic activity against various species of bacteria and fungus. The entire region of CcPHZF is 879 bp in length and the open reading frame predicted a polypeptide of 292 amino acids. The homolog of CcPHZF is not Present in database except clones of AC004044 and NM100203 from Arabidopsis with 58 and 59％, respectively. Genomic Southern analysis indicated that the pepper genome contains a single copy of CcPHZF. The CcPHZF was strongly induced in the pepper leaves 3 days after PMMV treatment, when HR occurs on the leaf surface. Characterization of CcPHZF is underway to investigate if the CcPHZF is related to disease resistance against pathogens.

• Mycobiology
• /
• v.46 no.1
• /
• pp.24-32
• /
• 2018

Improper disposal of herb residues in China has caused severe problems to the surrounding environment and human safety. Three herb residues, i.e., compound Kushen injection residues (CKI) and part one and part two of Qizhitongluo Capsule residues (QC1 and QC2, respectively), were used for the cultivation of Pleurotus ostreatus. The effect of the supplementation of corncobs (CC) with different herb residues on yield, nutritional composition, and antioxidant activity of P. ostreatus was investigated. Compared to the control, the higher mycelial growth rate was observed on substrates CC +30% CKI and CC +30% QC1, while the higher yield was obtained from substrates CC +30% QC2 and CC +30% CKI. Moreover, chemical analysis of fruit bodies revealed that the addition of herb residues to CC significantly increased proteins, amino acids, ashes, minerals (Na and Ca), and total phenolic contents but significantly reduced carbohydrates and $IC_{50}$ values of DPPH radicals. In addition, no heavy metals (Pb, Cd, and As) were detected in the fruiting bodies harvested from different substrate combinations. These results demonstrated that mixtures of CC with herb residues might be utilized as a novel, practical, and easily available substrate for the cultivation of P. ostreatus, which is beneficial for the effective management of herb residues.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.21-24
• /
• 2016

The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on device applications of the CC tapes, it is necessary to reinforce thin metallic foils externally to one-side or both sides of the CC tapes. Due to the external reinforcement of brass foils, it was found that this could increase the reversible strain limit from the Cu-stabilized CC tapes. In this study, the effects of differently hardened brass foil laminate on the electromechanical property of CC tapes were investigated under uniaxial tension loading. The tensile strain dependence of the critical current ($I_c$) was measured at 77 K and self-field. Depending on whether the $I_c$ of CC tapes were measured during loading or after unloading, a reversible strain (or stress) limit could be determined, respectively. The both-sides of the Cu-stabilized CC tapes were laminated with brass foils with different hardness, namely 1/4H, 1H and EH. From the obtained results, it showed that the yield strength of the brass laminated CC tapes with EH brass foil laminate was comparable to the one of the Cu-stabilized CC tape due to its large yield strength even though its large volume fraction. It was found that the brass foil with different hardness was mainly sensitive on the stress dependence of $I_c$, but not on the strain sensitivity due to the residual strain induced in the laminated CC tapes during unloading.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5789-5795
• /
• 2013

Background: The high mobility group box 1 (HMGB1) protein is a widespread nuclear protein present in most cell types. It typically locates in the nucleus and functions as a nuclear cofactor in transcription regulation. However, HMGB1 can also localize in the cytoplasm and be released into extracellular matrix, where it plays critical roles in carcinogenesis and inflammation. However, it remains elusive whether HMGB1 is relocated to cytoplasm in clear cell renal cell carcinoma (ccRCC). Methods: Nuclear and cytoplasmic proteins were extracted by different protocols from 20 ccRCC samples and corresponding adjacent renal tissues. Western blotting and immunohistochemistry were used to identify the expression of HMGB1 in ccRCC. To elucidate the potential mechanism of HMGB1 cytoplasmic translocation, HMGB1 proteins were enriched by immunoprecipitation and analyzed by mass spectrometry (MS). Results: The HMGB1 protein was overexpressed and partially localized in cytoplasm in ccRCC samples (12/20, 60%, p<0.05). Immunohistochemistry results indicated that ccRCC of high nuclear grade possess more HMGB1 relocation than those with low grade (p<0.05). Methylation of HMGB1 at lysine 112 in ccRCC was detected by MS. Bioinformatics analysis showed that post-translational modification might affect the binding ability to DNA and mediate its translocation. Conclusion: Relocation of HMGB1 to cytoplasm was confirmed in ccRCC. Methylation of HMGB1 at lysine 112 might the redistribution of this cofactor protein.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.4
• /
• pp.437-443
• /
• 2005

Quality characteristic of Kipfel cookies with 0, 20, 40 and $60\%$ of freeze dried chitosan-chungkukjang(CC), which was fermented for 24 hours at $40^{\circ}C$ with steamed soybean added with $0.25\%$ of chitosan(MW 2,025 kDa) powder and inoculated $2\%$ of Bacillus lichenifomis, were investigated Bulk density was higher in the CC cookie, but there were no difference among the CC cookies. While hardness was decreased, brittleness and springiness were increased in the higher ratio of CC, but no significant difference was observed in cohesiveness and gumminess. According to increasing the CC ratio, L$\ast$ values and hue angle were decreased from 62.69 and 96.71 to 44.41 and 69.30, respectively. While a$\ast$ values were increased from -1.94 to 4.95, and no changes were observed in b$\ast$ values. Glucosamine content was $27.34 mg\%$ in the control cookie, $40{\~}93.75 mg\%$ in the CC cookies. Antioxidant activity of the CC cookies were higher than the control. The activity of the control cookie was decreased during storage, while it was maintained in CC cookies. There were no differences in the sour, sweet and savory taste. Off-flavor did not detected in the $0{\~}40\%$ CC cookies, but the chungkukjang odor was slightly detected in the $60\%$ CC cookie. The $20{\~}40\%$ CC cookies did not affect on native odor of Kipfel cookie. Color acceptability also did not affect by addition of CC $20{\~}40\%$ but it was lower in $60\%$ CC cookie. Overall acceptability was the best in the $20\%$ CC cookie.

• Journal of the Korea Convergence Society
• /
• v.2 no.1
• /
• pp.31-36
• /
• 2011

This study was performed to investigate the problems of using asbestos for dental technicians. Samples for analysing were sampled by personal sampler in 40 sampling points of 10 dental laboratories in Daegu city from December 2010 to January 2011 and counted with phase contrast microscopy. The results were as follows: 1. Asbestos concentration(geometric mean) of 40 sampling points in 10 dental laboratories was 0.0061 f/cc and it was under recommended industrial and indoor air standard, but the concentration of asbestos in only two dental laboratories was over indoor recommended standard. 2. The concentration of asbestos in processing room and burnout room was 0.0099 f/cc and 0.0037 f/cc, respectively. 3. The mean concentration(GM) of asbestos by kinds of casting ring liners was 0.0159 f/cc in dental laboratories using industrial asbestos, 0.0104 f/cc in them using asbestos containing ring liners, and 0.0026 f/cc in them using non-asbestos ring liners. Casting ring liners using in dental laboratories should be substituted with non-asbestos liners, because most of dental laboratories were using asbestos containing ring liners and a few of them showed higher concentration than recommended standard.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5259-5264
• /
• 2014

Background: CT based brachytherapy allows 3-dimensional (3D) assessment of organs at risk (OAR) doses with dose volume histograms (DVHs). The purpose of this study was to compare computed tomography (CT) based volumetric calculations and International Commission on Radiation Units and Measurements (ICRU) reference-point estimates of radiation doses to the bladder and rectum in patients with carcinoma of the cervix treated with high-dose-rate (HDR) intracavitary brachytherapy (ICBT). Materials and Methods: Between March 2011 and May 2012, 20 patients were treated with 55 fractions of brachytherapy using tandem and ovoids and underwent post-implant CT scans. The external beam radiotherapy (EBRT) dose was 48.6Gy in 27 fractions. HDR brachytherapy was delivered to a dose of 21 Gy in three fractions. The ICRU bladder and rectum point doses along with 4 additional rectal points were recorded. The maximum dose ($D_{Max}$) to rectum was the highest recorded dose at one of these five points. Using the HDRplus 2.6 brachyhtherapy treatment planning system, the bladder and rectum were retrospectively contoured on the 55 CT datasets. The DVHs for rectum and bladder were calculated and the minimum doses to the highest irradiated 2cc area of rectum and bladder were recorded ($D_{2cc}$) for all individual fractions. The mean $D_{2cc}$ of rectum was compared to the means of ICRU rectal point and rectal $D_{Max}$ using the Student's t-test. The mean $D_{2cc}$ of bladder was compared with the mean ICRU bladder point using the same statistical test. The total dose, combining EBRT and HDR brachytherapy, were biologically normalized to the conventional 2 Gy/fraction using the linear-quadratic model. (${\alpha}/{\beta}$ value of 10 Gy for target, 3 Gy for organs at risk). Results: The total prescribed dose was $77.5Gy{\alpha}/{\beta}10$. The mean dose to the rectum was $4.58{\pm}1.22Gy$ for $D_{2cc}$, $3.76{\pm}0.65Gy$ at $D_{ICRU}$ and $4.75{\pm}1.01Gy$ at $D_{Max}$. The mean rectal $D_{2cc}$ dose differed significantly from the mean dose calculated at the ICRU reference point (p<0.005); the mean difference was 0.82 Gy (0.48-1.19Gy). The mean EQD2 was $68.52{\pm}7.24Gy_{{\alpha}/{\beta}3}$ for $D_{2cc}$, $61.71{\pm}2.77Gy_{{\alpha}/{\beta}3}$ at $D_{ICRU}$ and $69.24{\pm}6.02Gy_{{\alpha}/{\beta}3}$ at $D_{Max}$. The mean ratio of $D_{2cc}$ rectum to $D_{ICRU}$ rectum was 1.25 and the mean ratio of $D_{2cc}$ rectum to $D_{Max}$ rectum was 0.98 for all individual fractions. The mean dose to the bladder was $6.00{\pm}1.90Gy$ for $D_{2cc}$ and $5.10{\pm}2.03Gy$ at $D_{ICRU}$. However, the mean $D_{2cc}$ dose did not differ significantly from the mean dose calculated at the ICRU reference point (p=0.307); the mean difference was 0.90 Gy (0.49-1.25Gy). The mean EQD2 was $81.85{\pm}13.03Gy_{{\alpha}/{\beta}3}$ for $D_{2cc}$ and $74.11{\pm}19.39Gy_{{\alpha}/{\beta}3}$ at $D_{ICRU}$. The mean ratio of $D_{2cc}$ bladder to $D_{ICRU}$ bladder was 1.24. In the majority of applications, the maximum dose point was not the ICRU point. On average, the rectum received 77% and bladder received 92% of the prescribed dose. Conclusions: OARs doses assessed by DVH criteria were higher than ICRU point doses. Our data suggest that the estimated dose to the ICRU bladder point may be a reasonable surrogate for the $D_{2cc}$ and rectal $D_{Max}$ for $D_{2cc}$. However, the dose to the ICRU rectal point does not appear to be a reasonable surrogate for the $D_{2cc}$.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.199-206
• /
• 2004

Under the multiprogrammed situation, the performance of multiprocessor system is affected by the process allocation policy of the operating systems. The lowest communication cost can be achieved when the related processes positioned to the adjacent processors. While the effective allocation is quite difficult to the real situation, and the processing of the allocation policy consumes some computation time. The dual-ring CC-NUMA systems exhibit a quite performance difference according to the process a1location policy due to a lot of unbalanced memory transactions on the interconnection networks. In this paper, I propose a load balanced dual-link CC-NUMA system that does not requires the processes allocation policy. By the program-driven simulation results. the proposed system shows no remarkable difference according to the allocation policy while the dual-ring systems shows 10％ performance improvement by the process allocation. In addition, the proposed system outperforms the dual~ring systems about 1.5 times.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.