• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.73-79
• /
• 2016

In this paper, the grinding characteristics in thrust internal grinding have been studied using vitreous CBN wheels with a machining center. Grinding experiments have been performed according to grinding conditions such as wheel feed speed, cut depth, workpiece speed, rate of grinding width and number of grinding passes. The machining error, shape of machined surfaces, grinding force, and surface roughness have been investigated though these experiments. Based on the experimental results, the grinding characteristics on the machined surface in the internal thrust grinding are discussed.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.988-994
• /
• 1998

In the manufacturing of vitreous bonded CBN tool the porosity change associated with various processing conditions, I. e. the sintering temperature and the size and the amount of abrasive grits was observed. In the case of sintering of vitreous bond material only the specimen density reached the maximum at 950$^{\circ}C$ and then the total porosity was increased slightly with the temperature above 950$^{\circ}C$. In the sintering of a-brasive grits and the vitreous bond material together a marked increase in the total porosity was found with the temperature above 950$^{\circ}C$ Reducing the grit size at the constant volume fraction of abrasive grits showed an increase in the total porosity at whole sintering temperature. On the contrary. it was observed that increasing the volume fraction of abrasive grits with a same size showed the increased open porosity simultaneously with decreased closed porosity at whole sintering temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.32-32
• /
• 2004

산업이 발전함에 따라 기계부품의 소형화, 고속화가 요구되는 세계적인 추세에서 정밀 가공기술은 기계 및 전자 부품 산업에서 중요한 위치를 차지하게 되었다. 특히, 원통형상을 가지는 부품의 가공에서 무심 연삭(Centerless Grinding) 공정은 높은 생산성과 정확한 치수 형성의 능력이 있어서 중요한 생산공정으로 발전되어 왔다. 예컨대 각종 Pin, Compressor의 Crankshaft, 소형 축, 연료분사기 등은 무심 연삭 공정을 통하여 높은 정밀도를 얻고 있다. 본 발표에서는 최근 생산 현장에서 요구되고 있는 고효율 연삭 공정을 위한 Shaft류의 외경과 단면의 복합공정 연삭 방법을 기술하였다.(중략)