• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.247-256
• /
• 2003

The patient had bruxism and epilepsy tendency. Inadequate or unstable posterior support was identified due to severe anterior attrition and decreased occlusal vertical dimension. Prematurities of posterior occlusal and wear facets increased the function of anterior teeth, resulting in severe wear. Wear facets displayed sharply defined peripheries, which are matched on articulated diagnostic casts. Also the patient showed C III malocclusion tendency, and lost some facial contour with drooping corners on the mouth. In this case, the alteration of OVD (Occlusal Vertical Dimention) may provide a biologically compatible adjunct to the treatment such as dentofacial esthetics, improved visual proportion in facial heightand mechanical solutions to the force-management of the masticatory system. The patient requires extensive restorative treatment to regain appropriate function, esthetics and comfort. According to the report by Farhad Fays, the average vertical distance from the maxillary to the mandibular mucolabial reflection in the region of the central incisors is approximately 34mm. However, the vertical distance of this patient was found to be 32mm, which was necessary to add gauge 20-sheets to apply vertical dimension. A removable occlusal overlay splint, which restores OVD to the estimated optimalposition, is the general first trial. The patient was observed periodically for 6 weeks, while appropriate adjustments were made vertical dimension to function. When patient felt comfortable with the splint, the teeth were prepared, and provisional restorations are placed for 3 months. The provisional restoration was fabricated by a diagnostic wax-up. When the patient felt comfortable with the provisional restoration, the final restoration mimics OVD, function, and esthetics that have been developed in the treatment restorations. Restoration of the extremely worn dentition presents a substantial challenge to thedentists. Therefore, careful evaluation of the etiology, history, and factors associated with occlusal vertical dimension should be preceded prior to the appropriate treatment planning.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6019-6026
• /
• 2015

본 연구에서는 소량생산 및 개인 맞춤형 제작으로 매우 유용한 3D 프린팅 기술을 이용하여 자가 맞춤형 부목을 제작하고자 하였다. 방법으로는 3D 프린터를 이용하여 용융적층조형방식(fused deposition modeling)으로 부목을 제작하였으며, 재료는 열가소성 플라스틱 계열인 ABS(acrylonitrile butadiene styrene) 수지를 이용하였다. 부목의 모델링은 실제 인체의 손 부위 3차원 전산화단층영상을 이용하였으며 통풍이 가능하도록 설계하였다. 그 결과 실제 인체 손 모양과 일치하는 자기 맞춤형 부목이 성공적으로 출력되었다. 또한 기존 부목보다도 우수한 방사선영상을 획득할 수 있었다. 결론적으로 본 연구에서 제시한 3D 프린팅 사례는 ABS 수지를 이용한 용융적층조형방식의 유사한 구조물을 출력할 때 기초자료로 사용할 것으로 판단된다.

• 박물관보존과학
• /
• 제14권
• /
• pp.29-35
• /
• 2013

백자투각연당초문지통과 같이 기형 및 장식기법이 복잡한 도자기의 경우, 기존에 사용되고 있는 복원제는 경화시간이 짧아 정교한 성형이 어려워 틀을 이용하여 복원한다. 하지만 틀을 이용한 복원 또한 시간적, 재료적인 단점이 있기 때문에 직접 복원하는 방법을 연구하고자 하였다. 복원제의 경화시간과 물성은 작업성과 밀접한 관계가 있기 때문에 복잡한 형태의 복원부를 직접 성형할 때는 충분한 가사시간이 확보되는 복원제가 필요하다. 소성점토(Original Sculpey)와 에폭시퍼티(Repair it Quik)를 각기 다른 비율로 혼합하여 가사시간, 색도 변화, 작업성에 대한 실험을 하였다. 실험결과 OS8 : RQ2의 비율로 혼합하였을 경우 가사시간이 충분하고 성형성이 좋았으며 황변도가 낮고 채색성이 좋아 가장 효과적이라는 것을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1356-1362
• /
• 2008

본 논문에서는 카메라가 가지는 대표적인 기능중의 하나인 자동 화이트 밸런스에 대한 알고리즘을 제안한다. 화이트 밸런스는 흰색의 물체나 물건 고유의 색이 아닌 부분들을 제거하는 과정이다. 화이트 밸런스를 수행하기 위해 사람의 눈에 의해 느끼는 시각차와 색차의 표현이 동일한 $CIEL^*a^*b^*$ 색 공간에서 영상의 분포를 분석하여 흰색 물체의 색 변화 정도를 추정한다. 이를 기준 백색 추정이라 한다. 정확한 추정을 위하여 환경에 의해 변화되었다고 추정되는 부분에 대해 그룹화 한다. 그룹화 된 영상 정보를 통해 영상의 특성을 파악하여 기준 그룹을 정하여 기준 그룹까지의 누적 픽셀들을 선택하는 컬러 샘플링하여 기준 백색을 추정한다. 또한 영상 보정을 위한 컬러 이득은 영상의 포화(Saturation)를 고려하여 얻어진다. 이를 통한 제안된 자동 화이트 밸런스 알고리즘은 뛰어난 영상 보정 기능을 가진다.

• 실내환경 및 냄새 학회지
• /
• 제16권2호
• /
• pp.139-149
• /
• 2017

In order to reduce odor and methane emission from the landfill, open biocovers and a closed biofilter were applied to the landfill site. Three biocovers and the biofilter are suitable for relatively small-sized landfills with facilities that cannot resource methane into recovery due to small volumes of methane emission. Biocover-1 consists only of the soil of the landfill site while biocover-2 is mixed with the earthworm casts and artificial soil (perlite). The biofilter formed a bio-layer by adding mixed food waste compost as packing material of biocover-2. The removal efficiency decreased over time on biocover-1. However, biocover-2 and the biofilter showed stable odor removal efficiency. The rates of methane removal efficiency were in order of biofilter (94.9%)>, biocover-1(42.3%)>, and biocover-2 (37.0%). The methane removal efficiency over time in biocover-1 was gradually decreased. However, drastic efficiency decline was observed in biocover-2 due to the hardening process. As a result of overturning the surface soil where the hardening process was observed, methane removal efficiency increased again. The biofilter showed stable methane removal efficiency without degradation. The estimate methane oxidation rate in biocover-1 was an average of 10.4%. Biocover-2 showed an efficiency of 46.3% after 25 days of forming biocover. However, due to hardening process efficiency dropped to 4.6%. After overturn of the surface soil, the rate subsequently increased to 17.9%, with an evaluated average of 12.5%.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.55-64
• /
• 2019

PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.232-237
• /
• 2019

CAD/CAM 기술은 이미 치과 보철학 영역에서 전반적으로 사용되고 있으며, 1994년 총의치 제작을 위한 CAD/CAM 기술이 처음 소개된 이후 의치 제작과정의 CAD/CAM 적용범위가 증가되고 있는 추세이다. 본 논문에서는 무치악 환자의 양악 총의치 제작을 위한 전통적인 다섯 단계 중 납의치 제작과정에 CAD/CAM기술을 도입하였다. 최종 인상채득하여 악간 관계를 기록한 주모형을 스캔한 후 Amann Girrbach사의 Ceramill full denture system (fds)을 이용해 납의치를 제작하였다. Ceramill fds는 스캔된 상하악 모형에 전용 소프트웨어를 이용해 인공치 배열 및 의치상을 제작하여 이를 밀링하는 방식으로 기존의 기공과정을 디지털로 전환하는 특징을 가진다. 이를 통해 총의치 제작시간의 단축 및 심미적, 기능적으로 만족스러운 의치제작이 가능했기에 본 증례를 보고하고자 하는 바이다.

• 대한치과의사협회지
• /
• 제56권11호
• /
• pp.631-640
• /
• 2018

Nowadays computer-guided "flapless" surgery for implant placement using templates is gaining popularity among clinicians and patients. The advantages of this surgical protocol are its minimally invasive nature, accuracy of implant placement, predictability, less post-surgical discomfort and reduced time required for definitive rehabilitation. Aim of this study is to describe the digital implant protocol, thanks to which is now possible to do a mini-invasive static guided implant surgery. This is possible thanks to a procedure named surface mapping based on the matching between numerous points on the surface of patient's dental casts and the corresponding anatomical surface points in the CBCT data. With some critical points and needing an adequate learning curve, this protocol allows to select the ideal implant position in depth, inclination and mesio-distal distance between natural teeth and or other implants enabling a very safe and predictable rehabilitation compared with conventional surgery. It represents a good tool for the best compromise between anatomy, function and aesthetic, able to guarantee better results in all clinical situations.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.88-94
• /
• 2019

PURPOSE. This study was conducted to investigate patterns of adjacent tooth displacement in the posterior implant with interproximal contact loss (ICL) by 3-D digital superimposition method. MATERIALS AND METHODS. Posterior partially edentulous patients, restored with implant fixed partial prostheses before 2011 and suffered from food impaction of ICL between 2009 and 2011, were included. Two dental casts, at the time of delivery and at the time of food impaction in a same patient, was converted into 3-D digital models through scanning and superimposition was performed to assess chronologic changes of the dentition. Directions of tooth displacement were evaluated and the amount of ICL was calculated. Correlations between the amount of ICL and elapsed time, or between the amount of ICL and age after function, were assessed at a significance level of P<.05. RESULTS. A total number of 13 patients (8 males, 5 females) with a mean age of $65.76{\pm}9.94years$ and 17 areas (4 maxillae, 13 mandibles) were included in this retrospective study. Teeth adjacent to the implant restoration showed complex displacements but characteristic tendency according to the location of the arch. The mean amount of ICL was $0.33{\pm}0.14mm$. Elapsed time from function to ICL was $61.47{\pm}31.27months$. There were no significant differences between the amount of ICL and elapsed time, or age (P>.05). CONCLUSION. Natural teeth showed various directional movements to result in occlusal change in the arch. The 3-D superimposition of chronologic digital models was a helpful method to analyze the changes of dentition and individual tooth displacement adjacent to implant restoration.

• 한국지형학회지
• /
• 제24권3호
• /
• pp.27-45
• /
• 2017

At the upper part of terrace deposits at Jeongdongjin area, there is a structure in which reddish brown and grayish white layers laying horizontally. Previous studies have reported the existence of these structures within the deposits and suggested the theoretical background related to the formation process. However, the analysis of physical properties and chemical composition such as particle size, classification, etc. of the materials constituting the reddish brown and grayish white layers is scarcely done. In this study, the physico - chemical properties of gray - white and reddish brown beds are investigated. The mean grain size of the particles was less than $4{\varphi}$ in both layers and the reddish brown layer was more coarse. The results shows that the sorting of the grayish white layer is better. The chemical composition of both layers shows that the average concentration of $SiO_2$, $Al_2O_3$ and $K_2O$ of the grayish white layer was higher than those of the reddish brown layer. The concentration of $Fe_2O_3$ of reddish brown lyaer was 3 times higher than those of the grayish white layer. The degree of chemical weathering (CIA) is 90 or so in both the reddish brown and grayish white layers, indicating a significant level of chemical weathering. In conclusion, reddish brown layers had been formed by the processes related to the migration of iron and the migration of water that induced aggregation after the formation of sediments (psudo-gleization). In this study area, a vertical layer of grayish white which cuts off horizontal reddish brown and grayish white color was found. The vertical layer or wedge similar to a ice-wedge or columnar structure that in a cold environment, and there is a difference in shape and size. The vertical layer appears to have occurred three or more cycles. The vertical layers begin to form at a certain height within the outcrop and descend downwards, which of course is difficult to see as directing certain times.