• Journal of Korea Foundry Society
• /
• v.29 no.3
• /
• pp.128-137
• /
• 2009

The effects of alloying elements on the mechanical properties of 3.6wt%C-2.6wt%C ductile cast iron poured into shell stack molds were investigated. The strength and hardness of the specimens obtained from the center layer in the 5-story stack mold were the lowest and those for other specimens were increased with increased distance from the center. The strength and hardness of the specimens obtained from the center layer were decreased with increased number of layers of the shell stack mold. The strength and hardness of the smaller specimens with the diameter of 9.5 mm were higher than those of 17.5 mm. On the other hand, the elongation of the former was lower than that of the latter. The strength and hardness were increased and the elongation was decreased roughly with the increased amounts of manganese and copper added, respectively. The strength and hardness were increased with the incrcased amount of molybdenum added to 0.40wt% and rather decreased with that to 0.80wt%. Those were greatly increased with the increased amount of tin added and the elongation was roughly decreased with it.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.259-266
• /
• 1993

This experiment was carried out to the effect of population densities on the growth reproduction, cast production of the earthworm and chemical composition of worm casts. The population densities of 50, 100, 150, 200 and 250 individuals of the earthworm fed with cow manure was studied in rearing box($6,400cm^3$) and fertility stage during a period of 60 days. The results were summarized as follows 1. Survival rates(SR) of the earthworms had significantly positive correlated with increasing rate(IR). But, survival rates(SR) and increasing rate(IR) had significantly negative correlated with reproductive efficiency(RE). 2. The ranges of optimum population densities estimated were $42.7cm^3-128.0cm^3/worm$. 3. The cast production estimated were 36.5mg-80.9mg/day/worm grown in optimum population densities(50-150 worms/$6,400cm^3$). 4. The earthworm castings are an excellent soil conditioning material with a high chemical composition and their physical properties.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.128-131
• /
• 2010

Graphite sheet electro-deposited with lead was evaluated as a possible candidate for current collectors of lead acid batteries. Cyclic voltammetry was performed on the materials to evaluate the electrochemical properties. The graphite sheet electro-deposited with lead is electrochemically stable in the cathodic potential sweep. However, in the anodic potential sweep, the graphite sheet electro-deposited with lead is electrochemically unstable due to the oxygen evolution and the intercalation of sulfuric acid. Lead acid batteries were prepared by using a graphite sheet and a cast grid as current collectors for anode and performance test using those batteries was carried out. A lead acid battery with graphite sheets showed higher capacity and energy density than a conventional lead acid battery with cast grid.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.122-128
• /
• 2000

세라믹, 다이야몬드등과 같은 고경질재료에 대한 미소형상의 가공은 대단히 어렵고 일반적인 방법으로는 상당한 시간을 요구한다. 이러한 재료의 고능률 가공을 실현하기 위하여, 메탈본드 다이야몬드휠에 전해 인프로세스 드레싱(Electrolytic In-Process Dressing)을 적용한 연삭을 머시닝센타에서 시도하였다 본 연구에서, 메탈본드 다이야몬드휠은 전기방전에 의하여 고능률로 트루잉(truing)되었다. 알루미나 세라믹의 핀선단($\phi$50$\mu\textrm{m}$)과 로커웰 경도측정기의 다이야몬드 압입자(indenter)($\phi$40$\mu\textrm{m}$)를 ELID연삭에 의하여 창성하였다. 그 결과를 본 논문에서 보고한다.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.122-128
• /
• 2007

In this paper, we present the design and measurement of a side-fed circularly-polarized patch antenna with a dielectric loading. The antenna consists of a comer-truncated rectangular patch, an L-shaped ground plane, a dielectric loading material, and a coaxial probe. An antenna operating at the UHF band (910 MHz) for the RFID reader applications is optimized using a commercial software. The size of the patch is reduced by a factor of 1.73 by loading the patch with mono-cast(MC) nylon. Measurements of the fabricated antenna show performance characteristics comparable to those of much larger commercial RFID reader antennas.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.124-128
• /
• 1995

It is the "maturity rule" that concrete of the same mix, at the same maturity, has the same strength. In this study, the Nurse-Saul function which was proposed to account for the effects of temperature and time on strength development is used in computing maturity. After existing various functions to relate concrete strength to the maturity value are considered, new strenth-maturity function is proposed. Tests are conducted in order to compare prediction value with measured concrete strength. The constants in proposed prediction equation are determined by standard specimens(cylinders) test, and the equation is adopted to predict strength of slab. The slab was cast in the laboratory from the same batch of mole, and cores are cut from slab in order to estimate the actual strength. Tehese values are used to compare with proposed equation. equation.

• Journal of Korea Foundry Society
• /
• v.25 no.3
• /
• pp.128-133
• /
• 2005

The effects of Mn and Cr on the crystallization behaviors of Fe-bearing intennetallics in A356 alloy were studied. Coarse and acicular ${\beta}-Al_{5}$FeSi phase in A356-0.20wt.%Fe alloy was modified into small ${\alpha}$-Al(Fe,Mn)Si and ${\alpha}$-Al(Fe,Cr)Si phases in response to Mn and Cr addition, respectively. Increasing of Mn addition amount elevates the crystallizing temperature of ${\alpha}$-Al(Fe,Mn)Si and the Mn/Fe ratio in the ${\alpha}$-Al(Fe,Mn)Si. Cr is more effective to modify ${\beta}-Al_{5}$FeSi in comparison with Mn. ${\alpha}$-Al(Fe,Mn)Si phase had BCC/SC dual structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.122-128
• /
• 2000

In this paper, a bulging condition which affect the quality of continuous casting steel was analyzed by using the numerical analytic method. First, solidification analyses were performed for each cooling zone by one-dimensional finite difference method. The bulging deformation of cast slab has been calculated with a two-dimensional elasto-plastic and creep finite element model. The adequacy of the model has been checked against the experimental results. From this study the effects of the process variables such as casting speed, cooling condition and roll pitch were examined. The results from these analyses would be able to apply to the design of continuous casting process.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.63-74
• /
• 2012

This experiment was carried out to investigate the effect of different stocking rate on growth, cast production and conversion efficiency of organic matter to tissues of earthworm. The carbon and nitrogen ratio (C/N) of tested Korean cow manure was 25.1, it was estimated an adequate ratio as feed for earthworms. The different stocking rates were 1:8(S-1), 1:16(S-2), 1:32(S-3) 1:64(S-4) 1:128(S-5) and 1:256 (S-6) as the ratios of earthworm fresh weight to biomass of Korean cow manure, respectively. A stocking rate of 1:32(S-3) was obtained a significantly highest values of increasing rate and conversion efficiency of organic matter to earthworm tissues. The mean values of increasin g rate of fresh weight and conversion efficiency of organic matter to earthworm tissues were 10.63 mg/day and 6.65% at the ratio of 1:32(S-3) with a rearing volume was $56.6cm^3$. A stocking rate of 1:8(S-1) was obtained a highest ratio of vermicasts, but showed a negative values of increasing rate and conversion efficiency of organic matter to earthworm tissues, it may due to severely food competition between individuals during the rearing periods. The pH, total nitrogen, available phosphorus, cation exchange capacity and exchangeable cations of vermicasts tended to increase with stocking rate. Especially, available phosphorus, cation exchange capacity and exchangeable cations of vermicasts tended to increase with rearing progressed. Vermicasts have the potential for improving plant growth when amended to container medium and soil according to increased availability of nutrients and improved physicochemical properties.

• 연구논문집
• /
• s.33
• /
• pp.137-145
• /
• 2003

The effects of antimony addition on the microstructures and creep behavior of AZ31 magnesium alloy have been investigated. Constant load creep tests were carried out at temperatures ranging from $150^{\circ}C$ to $200^{\circ}C$, and an initial stress of 50MPa for AZ31 alloys containing antimony up to 0.84% by weight. Results show that small additions of antimony to AZ31 effectively decreased the creep extension and steady state creep rates. The steady state creep rate of AZ31 was reduced 2.5 times by the addition of 0.84% of antimony. The steady state creep rate of AZ31-0.84Sb alloy was controlled by dislocation climb in which the activation energy for creep was 128 kJ/mole. The microstructure of as-cast AZ31-0.84%Sb alloy showed the presence of $Mg_3Sb_2$ precipitates dispersed throughout the matrix. The main reason for the higher creep resistance in AZ31-Sb alloys is due to the presence $Mg_3Sb_2$, which effectively hindered the movement of dislocations during the elevated temperature creep.