• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.283-297
• /
• 2007

Seamless data integration in the CAx chain of the CAD/CAPP/CAM/CNC has been achieved to a high degree, but research concerning the transfer of data from conceptual sketches to a CAD system should be carried out further. This paper presents a method for reconstructing a 3D model from a freehand sketch. Sketch-based modeling research can be classified into gestural modeling methods and reconstructional modeling methods. This research involves the reconstructional modeling method. Here, Mitani's seminal work, designed for box-shaped 3D model using a predefined template, is improved by leveraging a relational template and specialized for automotive design. Matching between edge graphs of the relational template and the sketch is formulated and solved as the assignment problem using the feature vectors of the edges. Including the stroke preprocessing method required to generate an edge graph from a sketch, necessary procedures and relevant techniques for implementing the template-based modeling method are described. Examples from a working implementation are given.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.17 no.3
• /
• pp.287-295
• /
• 2013

Objectives This study is report the effect of Asian Medical treatments for acne. Methods 25 years old mixed Hispanic female in California resident patient who was suffering from acne was treated with the Chung-We mix Extract powder, Houttuyniae Herba Extract and comedone extractor. She was taken a picture to compare with before and after treatments. Results Her acne was decreased and global acne grading system by 35 points to 7point improvement on the after treatments. Conclusion This case has the effectiveness with Herbs. According to Asian medicine, the caused of acne is internal problems and the acne is diagnosed as several kind of heats in the internal organ. Further clinical case of acne is needed for better results and to develop the ways of accurate diagnosis.

• Journal of the Korean Statistical Society
• /
• v.20 no.2
• /
• pp.202-207
• /
• 1991

In Le Cam's earlier work on superefficiency, it is proved that if an estimate is superefficient at a given paramter value $\theta$$\_$0/, then there must exist an infinite sequence {$\theta$$\_$n/}) of values(conversing to $\theta$$\_$0/) at which this estimate is worse than M. L. E. for certain classes of loss functions. For one-dimensional cases, these classes of lass functions include squared error loss. However. for multi-dimensional cases, they do not. This note is to give an example where a superefficiest estimator of a multi-dimensional parameter is not inferior to M. L. E. along any sequence ($\theta$$\_$n/) converging to the point of superefficiency with respect to the squared error loss.

• The Journal of Korean Medicine
• /
• v.26 no.2 s.62
• /
• pp.182-194
• /
• 2005

Objectives: After the discontinuance of the Women's Health Initiative (WHI)clinical trial in the U.S. in July 2002, I thought that the domestic medical field would come to a crisis in hormonal treatment for perimenopausal and postmenopausal women. However, the domestic condition of HRT has barely changed. This study was designed to investigate world research trends in HRT and bring forward the response of the Traditional Korean Medicine (TKM) Research Group. Methods: I investigated recent domestic ;md world research trends about HRT and climacteric syndrome. Based on this analysis, I predicted western medical research trends and direction for HRT and medical care of perimenopausal and postmenopausal women. Results and Conclusions: I propose that we (TKM Research Group) have to explain the side effects of HRT for postmenopausal women and try to suggest complementary therapy for it. For that aim, the Association of Korean Medicine's effort is very important, as well as personal practitioner's actions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.383-390
• /
• 2004

We describe the in-flight sensitivity calibration of the Far ultraviolet Imaging Spectrograph (FIMS, also known as SPEAR) onboard the first Korean science satellite, STSAT-1, which was launched in September 2003. The sensitivity calibration is based on a comparison of the FIMS observations of the hot white dwarf G191B2B, and two O-type stars Alpha-Cam, HD93521 with the HUT (Hopkins Ultraviolet Telescope) observations. The FIMS observations for the calibration targets have been conducted from November 2003 through May 2004. The effective areas calculated from the targets are compared with each other.

• The Journal of Korean Medical History
• /
• v.30 no.1
• /
• pp.43-50
• /
• 2017

In the United States, California is well known for its rigorous education and licensing system regarding East Asian Medicine and acupuncture. As in most other states in America, the State government controls the practice of acupuncture, massage, acupressure therapy, food therapy, and natural therapy using a board established to set, maintain, and uphold licensing credentials for acupuncturists and practitioners of East Asian medicine. In California the system started in the 1970s when the State Legislature passed a bill to measure competency, and license acupuncturists. This study briefly describes the California Acupuncture Board (CAB), which is authorized to control the related education, examination, continuing education, and management of licenses already awarded. This study addresses the essential and minimum educational requirement established by the CAB for licensure, that is mandate classroom lecture with additional 950 hours clinic training, and the 50 hours of continuing education credits earned every two years, for maintaining the license.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.2
• /
• pp.72-79
• /
• 2023

PURPOSE. The purpose of this in vitro study was to compare the accuracy of various 3D printers and a milling machine. MATERIALS AND METHODS. The die model was designed using CAD (Autodesk Inventor 2018 sp3). The 30 ㎛ cement space was given to the die and the ideal crown of the mandibular left first molar was designed using CAD (ExoCAD). The crowns were produced using the milling machine (Imes-icore 250i) and the 3D printers (Zenith U, Zenith D, W11) and they were divided into four groups. In all groups, the interior of each crown was scanned (Identica blue) and superimposed (Geomagic Control X) with the previously designed die. The difference between the die and the actual crown was measured at specific points. The Kruskal-Wallis test, the Mann-Whitney test, and Bonferroni's method were performed with a statistical analysis software (P < .008 in inter-group comparison P < .001 in intra-group comparison). RESULTS. In all groups, the center of the occlusal area and the anti-rotational dimple area showed significantly greater difference and the marginal area showed the smallest difference comparatively. The mean value of the difference in each area and the sum of the differences were higher in order of W11, Imes-icore 250i, Zenith D, and Zenith U. CONCLUSION. The digital light processing (DLP) method shows higher accuracy compared to the sereolithography (SLA) method using the same resin material.

• Journal of Life Science
• /
• v.24 no.12
• /
• pp.1276-1283
• /
• 2014

Cell adhesion molecules determine the cell-cell binding and the interactions between cells and extracellular signals. Cell-cell junctional complexes, which maintain the structural integrity of tissues, consist of more than 50 proteins including multi-PDZ domain protein 1 (MUPP1). MUPP1 contains 13 postsynaptic density-95/disks large/zonula occludens-1 (PDZ) domains and serves a scaffolding function for transmembrane proteins and cytoskeletal proteins or signaling proteins, but the mechanism how MUPP1 links and stabilizes the juxtamembrane proteins has not yet been elucidated. We used the yeast two-hybrid system to identify proteins that interact with PDZ domains of MUPP1. We found an interaction between MUPP1 and cell adhesion molecule 1 (Cadm1, also known as SynCAM1, Necl-2, or TSLC1). Cadm1 bound to the second PDZ domain of MUPP1. The carboxyl (C)-terminal end of Cadm1 has a type II PDZ-association motif (-Y-F-I) which was essential for the interaction with MUPP1 in the yeast two-hybrid assay. MUPP1 also bound to the C-terminal cytoplasmic tail region of other Cadm family members (Cadm2, Cadm3, and Cadm4). In addition, these protein-protein interactions were observed in the glutathione S-transferase (GST) pull-down assay and by co-immunoprecipitation. Anti-MUPP1 antibody co-immunoprecipitated Cadm1 and Cadm4 with MUPP1 from mouse brain extracts. These results suggest that MUPP1 could mediate interaction between Cadms and cytoskeletal proteins.