• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.179-186
• /
• 2005

Each static and cyclic load test was performed in a laboratory model test. As a result, ground displacement decreased and bearing capacity of the soil increased owing to the sheer strength of geosynthetics in general. In addition, numerical analysis was operated using Mohr-Coulomb, Modified Cam-Clay models, and FLAC 4.0 2D and compared with the laboratory model test. The results were shown to be of a great difference because the existing equations had not considered the characteristics that sheer strength increases with a load increment. Therefore, this paper proposes an equation of cable elements considering an effect of load given through repeated tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.7
• /
• pp.687-692
• /
• 2009

The friction welding of Zr-based bulk metallic glass (BMG) rods and tubes to similar BMGs, and to crystalline metals were performed. An infrared thermal imager (FLIR-Thermal Cam SC-2000) was used to measure the temperature distribution at joining interface of the specimens during friction welding. All BMGs adopted in this study showed a successful friction joining to similar BMG. The shape of the protrusion formed at the weld interface were examined. In order to characterize the friction weld interface, the micrographic observation and the X-ray diffraction analysis on the weld cross-section were carried out. The obtained results were discussed based on the temperature distribution measured at the weld interface A successful joining of the BMGs to crystalline metals could be obtained for certain pairs of the material combination through the precise control of the friction condition. The residual strength after dissimilar friction welding of BMG was evaluated by the four-point bending test and compared with the cases of friction welding to similar materials.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.447-448
• /
• 2007

Product development is consisting by trend that accommodate almost function digital cam in camera phone that can speak of Mobile appliance, and competition about number of elemental area of image sensor is consisting for market prior occupation between these. Propose in this research and small size camera phone self-focusing adjustment actuator that do city manufacture is similar with general storehouse pickup actuator drive way, but selected in cylindrical to reduce space that lens holder occupies because there is restriction loading of lens and space enemy. Target number of research established that execute drive displacement more than $600{\mu}m$ in 2.75V that is house voltage that is used in Mobile device that is general. Also, described about maximum transfer displacement characteristic, displacement response characteristic, hysteresis, response characteristic, smallest transfer step characteristic, actuator's drive characteristic that is manufactured to examination item of maximum consumption electric power by special quality estimation system that apply laser displacement sensor that produce itself to evaluate city manufactured actuator's special quality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.958-961
• /
• 2019

Convolutional neural network(CNN)의 등장으로 얼굴 표현 인식 연구는 많은 발전을 이루었다. 그러나, 기존의 CNN 접근법은 미리 학습된 훈련모델에서 Multiple-level 의 의미적 맥락을 포함하지 않는 Attention-embedded 문제가 발생한다. 사람의 얼굴 감정은 다양한 근육의 움직임과 결합에 기초하여 관찰되며, CNN 에서 딥 레이어의 산출물로 나온 특징들의 결합은 많은 서브샘플링 단계를 통해서 class 구별와 같은 의미 정보의 손실이 일어나기 때문에 전이 학습을 통한 올바른 훈련 모델 생성이 어렵다는 단점이 있다. 따라서, 본 논문은 Backbone 네트워크의 Multi-level 특성에서 Channel-wise Attention 통합 및 의미 정보를 포함하여 높은 인식 성능을 달성하는 Densely Backwarnd Attention(DBA) CNN 방법을 제안한다. 제안하는 기법은 High-level 기능에서 채널 간 시멘틱 정보를 활용하여 세분화된 시멘틱 정보를 Low-level 버전에서 다시 재조정한다. 그런 다음, 중요한 얼굴 표정의 묘사를 분명하게 포함시키기 위해서 multi-level 데이터를 통합하는 단계를 추가로 실행한다. 실험을 통해, 제안된 접근방법이 정확도 79.37%를 달성 하여 제안 기술이 효율성이 있음을 증명하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.44-53
• /
• 1994

We experimented on cutting characteristics-cutting force, behavior of cutting temprature, surface foughness, behavior of chips-under low tempdeature, which generated by liquid nitrogen (77K). The workpieces were freezed to -195 .deg. C and liquid nitrogen was also sprinkled on cutting area in order to increase the efficiency of machining in low temperature. The workpiece was became to -195 .deg. C in 5 minutes, and cutting temperature in CC was lower about 170 .deg. C than NC. The cutting force trended to increase slighty in cooled cutting, but chip thickness was decreased, shear angle was however increased. The form of chips was in good conditions of long or short tubular chips in CC. In CC surface roughness of workpiece was better than NC. In NC surface hardness of chips trended to increase according to increasing of cutting speed, but in CC it trended to decrease. The power spectrum of vertical cutting force trended to increase according to increasing of feed, and in CC it was higher than NC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.356-362
• /
• 1991

자동차, 항공기, 선박등과 같은 산업제품과 전화기, TV브라운관과 같은 가전제품, 심미적 기능을 갖는 제품등과 같은 일상용품등은 많은 부분이 자유곡면(sculptured surface)으로 이루어져 있다. 이러한 해석적으로 정의 하기 어려운 제품 또는 그것을 생산하는데필요한 금형을 가공하는데 있어서 기존에는 석고 모형이나 목형을 이용한 모방 절삭을 하였다. 그러나 근래에는 자유곡면으로이루어진 제품을 설계하고 가공하는데 있어서 CAD/CAM system을 이용하고 있다. 제품의 곡면을 표현하거나 이들을 NC가공하기 위해서는 곡면을 나타내는 형상 정보가 필요 하고 이들 형상정보로 곡면모델링을 하여공구 경로를 구한다. 그러므로 이들 형상정보를 허용한도내에서 적절히 정하여 실제형상에 가까운 곡면을 형성하여야 한다. CAD/CAM 기술의 발달에 따라 다양한 형태의 곡면을 형성하는 기능을 가진 system이 많이 출현되었고 점토, 석고 또는 나무등으로 만든 physical model로 부터 얻어진 형상정보에 의해 surface fitting을 함으로서 자유곡면을 표현하는 방법이 많이 사용되고 있다. 어떠한 곡면을 표현할때는 곡면의 특성을 잘 표현하면서 전체적으로 smooth 한 것이 바람직하다. 그러므로 곡면의 형태를 설계자가 쉽게 이해할 수 있고 적은 수의 patch로도 복잡한 형상을 나타내야 하며 또한 국부적으로 수정이 용이하여야한다. 본 논문에서는 자유곡면을 나타낼 수 있는 수학적 표현 방법에 관하여 논하고, 해석적 곡면으로 부터 형상정보를 얻어 곡면 모델링을 한 후의 Ferguson곡면, UBS와 NUBS의 차이점을 분석하고, 이들 곡면과 해석적 곡면으로부터 얻은 실제곡면과의 오차를 측정하여 실제형상에 가까운 모델링 곡면을 찾고자 하였다.. 라. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$) 수용액 메디움에서의 Cd(II), Mg(II) 및 Zn(II)의 Dowex 1-X8, Cl$^{-}$ 수지에 대한 흡착은 역시 어떤 메디움에서도 Cd(II) 흡착이 제일 크며, 다음이 Zn(II) 이고 착이온을 형성않는 Mg(II)이 제일 작았다. 한편 메디움 종류별 D값의 크기순위는 H$^{+}$>K$^{+}$> $Na^{+}$>NH$_{4}$$^{+}$이였다. 메디움의 종류에 따라 D값의 차이가 나는 것은 금속이온의 착이온 형성과 금속이온의 용액내에서의 이온종의 상태와 관련이 있다고 생각된다. 마. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$)과 MNO$_{3}$ 용리액에 의한 Cd(II), Mg(II) 및 Zn(II)의 용리는 예상한 바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 N

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.39-62
• /
• 2020

In this study, Barcelona Basic Model (BBM) was implemented into TOUGH2-MP/FLAC3D for the numerical analysis of coupled thermo-hydro-mechanical (THM) behavior of unsaturated soils and the prediction of long-term behaviors. Similar to the methodology described in a previous study for the implementation of BBM into TOUGH-FLAC, the User Defined Model (UDM) of FLAC based on the Modified Cam Clay Model (MCCM) and the FISH function of FLAC3D were used to extend the existing MCCM module in FLAC3D for the implementation of BBM into TOUGH2-MP/FLAC3D. In the developed BBM module in TOUGH2-MP/FLAC3D, the plastic strains due to change in suction increase (SI) in addition to mean effective stress are calculated. In addition to loading-collapse (LC) yield surface, suction increase (SI) yield surface is changed by hardening rules in the developed BBM module. Several numerical simulations were conducted to verify and validate the implementation of BBM: using an example presented in the FLAC3D manual for the standard MCCM, simulation results using COMSOL, and experimental data presented in SKB Reports. In addition, the developed BBM analysis module was validated by simultaneously performing a series of modeling tests that were performed for the validation of the Quick tools developed for the purpose of effectively deriving BBM parameters, and by comparing the Quick tools and Code_Bright results reported in a previous study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.102-109
• /
• 2017

The high pressure pump of a diesel injection system compresses the fuel supplied at low pressure into high pressure fuel and maintains the fuel of the common rail at the required pressure level according to the engine operating conditions. The high pressure pump is required to operate normally in order to compress the fuel to a high pressure of 2000 bar during the entire lifetime of the vehicle. Consequently, a suitable design technique, material durability and high precision machining are required. In this study, the high pressure pump simulation model of a 1-plunger radial piston pump is modelled by using the AMESim code. The main simulation parameters are the displacement, flow rate and pressure characteristics of the inlet and outlet valves, cam torque characteristics, and operating characteristics of the fuel metering valve and overflow valve. In addition, the operating characteristics of the pump are simulated according to the parameter changes of the hole diameter and the spring initial force of the inlet valve. The simulation results show that the operation of the developed pump model is logically valid. This paper also proposes a simulation model that can be used for current pump design changes and new pump designs.

• Journal of the Korean Society of Earth Science Education
• /
• v.12 no.1
• /
• pp.1-17
• /
• 2019

The importance of education in formulating and complementing climate change response has been widely recognized by international and national frameworks, agendas, strategies and action plans. Climate change education has the potential to meet the needs of communities to access updated information and knowledge on climate change, supporting policy development and the enhancing effectiveness of climate change response. This study develops an innovative model of Integrated Urban Climate Education (IUCE) as one suitable method for teaching and learning climate change and urbanization. This paper presents approaches, methodology and key lessons learned from the case study of IUCE in Cam Le District of Da Nang City. Findings from the study identify a number of important characteristics about the development and implementation of IUCE in a way that effectively contributes to urban resilience building. These characteristics include (1) multidimensional approaches, (2) teacher - centered base, (3) school-family-community connection, and (4) symbiosis principle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1018-1026
• /
• 2005

Recent development of 3D scanner and software is regarded as a promising method of acquiring replicas from human body indirectly. It would be very helpful if we could predict the characteristics of 2D pattern from the simple parameters related to 3D shape for ordinary user. Therefore, in this study, investigation of 2D pattern of waist/abdominal area from the 3D geometrical model was conducted for the pattern development of waist nipper. To create body models and develop the surface of them, one ortho commonly used CAD/CAM program, IDEAS(UGS-plm solutions, USA) was used. As for the size of the models, the width, thickness, and circumference ranges of adult women's torso reported in National Anthropometric Survey of Korea (1997) were used as a standard model. Seven size variations were made by changing the width of the waist only, from 19 cm to 40 cm. Therefore, simulated body models include not only the normal body but also obese body who has wider waist and abdomen width than hip width. As results, it was found that the curvature of the unfolded 2D pattern around the abdominal area decreases as the waist width increases. As the width of the waist increases more and more, so that the comparative ratios around the torso becomes in abnormal ranges, there appears inflection points and the direction of curvature was changed. 2D Patterns obtained in this research were quantified by curvature, length of the curve and angle of deflection in the reference frame box for the convenience of the actual pattern making process. It was also possible to find that the shape of patterns of abnormal body resulted in a quite interesting change in the curves of 2D pattern, which could be applied to the custom made waist nipper for obese women.