• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.17-23
• /
• 2007

In the present work, flow analysis has been performed in the steam turbine bypass control valve (single-path type) for two different cases i.e., case with steam only and case with both steam and water. The numerical analysis is performed by solving three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations. The shear stress transport (SST) model and $k-{\varepsilon}$ model are used to each different case as turbulence closure. Symmetry condition is applied at the mid plane of the valve while adiabatic condition is used at the outer wall of the cage. Grid independency test is performed to find the optimal number of grid points. The pressure and temperature distributions on the outer wall of the cage are analyzed. The mass flow rate at maximum plug opening condition is compared with the designed mass flow rate. The numerical analysis of multiphase mixing flow(liquid and vapor) is also performed to inspect liquid-vapor volume fraction of bypass valve. The result of volume fraction is useful to estimate both the safety and confidence of valve design.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1623-1631
• /
• 2014

Eccentricity faults more or less exist in all rotating electrical machines. This paper establishes a more precise model of dynamic eccentricity (DE) in electrical machines named as curved dynamic eccentricity. It is a kind of axial unequal eccentricity which has not been investigated in detail so far but occurs in large electrical machines. The inductances of a large three-phase squirrel-cage induction machine (SCIM) under different levels of curved DE conditions are evaluated using winding function approach (WFA). These inductances include the stator self and mutual inductances, rotor self and mutual inductances, and mutual inductances between stator phases and rotor loops. A comparison is made between the calculation results under curved DE and the corresponding pure DE conditions. It indicates that the eccentricity condition will be more terrible than the monitored eccentricity based on the conventional pure DE model.

• 한국수산과학회지
• /
• 제33권6호
• /
• pp.514-519
• /
• 2000

우리형 그물에 작용하는 유수저항을 그 도면으로부터 정확하게 계산하기 위하여 그물실을 원형 실린더로 단순화하여 실린더를 통과한 흐름의 속도 감소에 대한 수치 해석 결과와 상자 구조의 모형 우리 그물에 대한 수리 모형실험을 행하여 저항계수 및 그물감을 통과기 전과 후의 속도 감소비에 대한 관계를 검토하였으며, 속도 감소비를 고려하여 흐름에 의한 그물의 변형 유무에 따른 모형 우리 그물에 작용하는 유수저항을 측정하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 그물감을 통과하기 전의 유속 U와 통과한 후의 유속 u의 비인 속도 감소비와 그물감의 $S_n/S$ 값과의 관계는 다음과 같이 나타났다. 나일론 랏쉘 그물감의 경우: $$\frac{u}{U}=1-1.54(\frac{S_n}{S})^(1.47)$$ 나일론 막매듭 그물감의 경우: $$\frac{u}{U}=1-0.97(\frac{S_n}{S})^(1.24)$$ 2. 변형을 고려하지 않는 그물의 경우는 후류의 영향을 고려하여 각각의 그물감에 작용하는 유수저항을 독립적으로 계산하고 그들을 합산하여 전체 저항으로 채택해도 된다는 것을 확인하였다. 3. 흐름에 의한 변형이 있는 그물의 경우는 유수저항 R이 유속 U의 제곱에 비례하지 않고 $R={\kappa}U^(1.76{\~}1.83)$으로 나타났다. 4. 유속이 1 m/s인 때의 A, B 및 C 그물의 유수저항은 그들에 생긴 변형으로 인해 변형이 없는 경우의 저항에 비해 각각 $63{\%}, 71.2{\%}$ 및 $73.2{\%}$로 나타났다.

• Journal of Animal Science and Technology
• /
• 제51권5호
• /
• pp.421-426
• /
• 2009

본 연구는 산란계의 사육공간의 크기별 발성음의 특성을 파악하기 위해 하이라인브라운(Hy-Line Brown) 80주령의 산란계를 대상으로 2008년 10월부터 2009년 2월까지의 기간 동안 발성음을 수집 및 녹음하였다. 산란계의 사육 케이지는 무항생제 축산물 사육밀도조건을 만족하는 0.0231 $m^3$ (0.3m ${\times}$ 0.14m ${\times}$ 0.55m)을 개체당 사육공간의 기준(control)으로 하고, 좁은 공간(small, 0.21m ${\times}$ 0.14m ${\times}$ 0.55m)과 넓은 공간(large, 0.3m ${\times}$ 0.3m ${\times}$ 0.55m) 등의 3가지 유형으로 구분하였다. 하루 3회, 각각 1시간씩 디지털 녹음기(PMD-650, Marantz)와 마이크(MKH 416P48, RF Condenser Mic.)를 이용하여 발성음을 녹음하여 분석을 실시하였다. 발성음의 스펙트로그램을 비교한 결과 케이지의 크기별로 차이가 있는 것으로 나타났으며, 스펙트럼을 비교한 결과 역시 차이가 있었다. 또한 발성음의 주파수, 강도 및 길이 역시 통계적으로 유의한 차이를 나타내었다. 본 연구를 통해 산란계의 사육공간과 발성음 사이에는 깊은 관련이 있었으며, 사육공간에 의한 스트레스의 정도를 파악하기 위해 발성음은 매우 유용할 것으로 판단된다.

• 수산경영론집
• /
• 제29권1호
• /
• pp.121-137
• /
• 1998

This study was conducted to examine the economic evaluation of the newly developed fish meal analog (BAIFA-M) in Korean rockfish feed. A raw fish feed (MP) and two commercially formulated diets (EP) were employed to compare weight gain (WG), feed conversion ratio (FCR) and survival rate (SR) from the sea cage culture system. By using the economic model in the practical sea cage culture system, feed cost, production cost and gross profit per kg production, rate of profit to gross revenue (RPGR), and internal rate of return (IRR) were calculated based upon the results of the experiment and the information of the private aquaculture farm (Young Chang) in Tong young, Korean. IRR criteria is one of the popular economic feasibility analysis methods applicable far aquaculture industry. This is an economic evaluation method to compare the given interest rate or the discount rate with IRR which can be calculated by the difference between the present value of the benefit stream and of the cost stream. The benefits of using EP on WG, FCR, SR, and production cost will be emphasized in this study. Fish averaging 20$\pm$3.6g (Mean$\pm$SD) were randomly distributed in each small cage (6m$\times$6m) as groups of 2,000 fish. By using 3 large size cages (12m$\times$12m), 12 small cages were constructed, and only 9 small cages were employed for three replicates of each diet treatment. To compare with MP diet, two sinking EP diets were designed by our laboratory and produced by the local feed company who wanted to promote these EP diets for the mass cage culture of Korean rockfish in the future. Two EP diets contain white fish meal and/or BAIFA-M as the main animal protein sources : WFM diet, maximum 43% of white fish meal : BAIEA- M diet, 30% of white fish meal nab replaced by BAIFA- M from WFM diet. Results are summarized in Table 1. Fish fed MP diet showed significantly lower SR than does fish fed two EP diets(P<0.05). However, there Were no significant difference on FCR among fish fed three practical diets. Table 1. Average feed conversion ratio (FCR), accumulative average survival rate (SR) and economic evaluation data far three practical diets. As we expected, BAIFA-M diet is more economical than WFM diet as well as MP diet. Feed cost and production cost per kg production from BAIEA - M diet were lower than those from WFM and MP diets. Moreover, gross profit per Kg production, RPGR and IRR from BAIFA- M diet were higher than those from WFM and MP diets. This economic evaluation study clearly indicated that MP diet should be replaced by the commerical formulated EP diets as soon as possible in the near future because MP diet is not economical in the practical sea cage culture system.

• 대한의용생체공학회:의공학회지
• /
• 제21권3호
• /
• pp.295-301
• /
• 2000

뼈의 성장에 미치는 많은 요소들 중에서 implant의 상대적인 미세운동(relative micromotion)은 뼈의 implant와의 접합을 방해하는 것으로 알려져 왔다. 그런데 이러한 상대적인 운동 및 spinal stability에 직접적으로 영향을 주는 하중조건, spinal material의 물성치, spinal geometry 및 뼈와 implant의 접촉면에서의 마찰계수를 고려하기 위하여, 하나의 titanium interbody cage 가 삽입된 human lumbar segments (L4-L5)의 유한요소 모델이 개발되었다. 이러한 유한요소 모델의 해석을 통하여 상대적인 미세운동, Posterior의 수직적인 변위, von Mises 응력 및 마찰력이 예측되었다. Cancellous bone. annulus fibers 및 ligaments의 기계적인 물성치의 감소 또는 접촉면에서의 마찰계수의 감소는 상대적인 미세운동 (relative micromotion or slip distance)을 증가 시켰다. 접촉면에서의 normal force는 뼈의 밀도 (cancellous bone density) 가 감소하거나 접촉마찰계수가 증가하면 감소했다. 특히 하중조건에 있어서, compressive preload에 대한 torsion의 추가는 접촉면의 anterior부위에서 상대적인 미세운동을 증가 시켰다. 하지만 디스크면적이 증가할수록 상대적인 미세운동은 감소했다. 결론적으로, 접촉면의 기계공학적 거동 (Relative micromotion, stress response, posterior axial displacement and contact normal force)은 접촉면의 마찰계수 뼈의 밀도, 하중조건 및 노화에 따른 형상/물성의 변화에 매우 민감함을 보이고있다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제33권2호
• /
• pp.306-321
• /
• 2014

This study aims to analyze difficulties that pre-service elementary teachers experience in investigating the life cycle of a common cabbage butterfly in person. As difficulties they face during the process of this research, they pointed out collecting eggs, observing molting, creating environments for a breeding cage, feeding, building a breeding cage, and making butterfly specimens. Out of all the environmental difficulties related to their school fields, they pointed out a difficulty of time management most of all, followed by placing a breeding cage in the classroom and the lack of microscopes for observation. In regard to difficulties related to their evaluations on students' activities, they found it difficult to evaluate students' activity with the life cycle of an insect in the aspect of knowledge and even to set evaluation criteria. Besides, many of them responded that it would be appropriate to evaluate a research on the life cycle of an insect through a portfolio or an observation journal. In regard to difficulties in terms of teachers' knowledge, they found it difficult to understand insect molting, metamorphoses, complete metamorphoses, incomplete metamorphoses, the structure of an insect body, and how to distinguish a female insect from a male one. In regard to the application of class models, they knew it is important for students to have various experiences through direct observation, so the experience-based learning model was proper for the process of observing the life cycle of a common cabbage butterfly. However, they found it difficult for students to observe each stage of the life cycle in person.

• Advances in Energy Research
• /
• 제3권3호
• /
• pp.133-142
• /
• 2015

A large wind farm can be simplified by the aggregated wind farm models for load flow, steady and transient stability studies. When a fault (such as a short circuit) happens in a large wind farm, some of wind turbines trip while others do not. This paper is to design a controller to modify the aggregated wind farm model in the case of one or more unit removed or added from the complete model. This is without stopping the simulation process during performing the steady state and transient analysis of the whole system. This controller can modulate the status of the wind turbines in the aggregated model in a given farm according to any change in this farm. By this controller, we save effort and time to change the status of wind turbines in the aggregated model. The proposed wind farm is composed of some smaller farms of permanent magnet synchronous generators (PMSGs) and others of squirrel cage induction generators (SCIGs).

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.233-236
• /
• 2000

The acoustical response of fish depends on size and physical structure na, most important, on the presence or absence of a swimbladder. Acoustic scattering models for swimbladdered fish represent a fish by an ideal pressure-release surface having the size and shape as the swimbladder. Target strength experiments of red seabream (Chrysophrys major) have been conducted using 38 (split-beam), 120 (split-beam) and 200kHz (dual-beam) frequencies. At each start of each experiment, the live fish are placed in the cage at the surface, then the cage is lowed to about $4{\cal}m$ depth where it remains during the measurements. To test the acoustic models, predictions of target strength based on swimbladder morphometries of 10 red seabream offish total length from $103{\cal}mm{\;}to{\;}349{\cal}mm$ ($3 <$TL/\lambda$ < 45)are compared with conventional target strength measurements on the same, shock-frozen immediately after caged experiments. X-ray was projected along dorsal aspect to know the morphological construction of swimbladder. and fish body. At high frequencies, Helmholtz-kirchhoff(HK) approximation would greatly enhance swimbladdered fish modeling. Sound scattering model [HK-ray approximation model] for comparison to experimental target strength data was used to model backscatter measurements from individual fish. The scattering data can be used in the inverse method along with multiple frequency sonar systems to investigate the adequacy of classification and identification of fish

• Tribology and Lubricants
• /
• 제35권3호
• /
• pp.158-168
• /
• 2019

This paper presents the investigation of two types of rotordynamic modeling issues for 2.2 kW-class, rated speed of 1,800 rpm, squirrel-cage type induction motors. These issues include the lamination structure of rotor cores, and the radial clearance of ball bearings that support the shaft of the motor. Firstly, we focus on identifying the effects of rotor core lamination on the rotordynamic analysis via a 2D prediction model. The influence of lamination is considered as the change in the elastic modulus of the rotor core, which is determined by a modification factor ranging from 0 to 1.0. The analysis results show that the unbalanced response of the rotor-bearing system significantly varies depending on the value of the modification factor. Through modal testing of the system, the modification factor of 0.079 is proven to be appropriate to consider the effects of lamination. Next, we investigate the influence of ball bearing clearance on the rotordynamic analysis by establishing a bearing analysis model based on Hertz's contact theory. The analysis results indicate that negative clearance greatly changes the bearing static behavior. Rotordynamic analysis using predicted bearing stiffness with various clearances from -0.005 mm to 0.010 mm reveals that variations in clearance result in a slight difference in the displacement of the system up to 18.18. Thus, considering lamination in rotordynamic analysis is necessary as it can cause serious analysis errors in unbalanced response. However, considering the effect of the bearing clearance is optional because of its relatively weak impact.