• 수산해양기술연구
• /
• 제43권1호
• /
• pp.38-48
• /
• 2007

Numerical modeling was used to evaluate the submerging characteristics of the submersible fish cage system operated by compressed air. The submerging characteristics calculated by numerical analysis as the cage was moved up and down were nearly identical to existing experiment results. Thus, the numerical model proposed in this study could be very useful in analyzing various parameters required for optimizing the design of a submersible fish cage system operated by compressed air.

• 대한화학회지
• /
• 제23권6호
• /
• pp.374-384
• /
• 1979

Zeolite NaA의 ${\alpha}$ cage에 있어서의 수화에너지와 그 위치를 결정하였다. Na(1)과 Na(2)사이의 site selectivity를 에너지 계산으로부터 결정하였는데 Na(1)이 Na(2)보다 선택성이 있는 것을 알 수 있었다. ${\alpha}$-Cage에 수화된 물들은 일그러진 정 12면체를 형성함을 알 수 있었다. Water(1), Water(2), Water(3)의 평균수화에너지는 각각 -29.847, -25.344, -15.888kcal/mole이다. 이 에너지 계산으로부터 얻어진 수화된 물들의 산소원자의 위치는 X선값과 잘 일치함을 보여준다. 또 수화된 정도에 따른 수화에너지의 그래프를 얻었다. 이 결과는 실험으로부터 얻어진 differential heat of sorption curve와 잘 일치함을 보여준다. ${\alpha}$ Cage 속에서의 유전상수는 3.5가 적합함을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.315-323
• /
• 2004

An electrical cascade impactor is a multi-stage impaction device to separate airborne particles into aerodynamic size classes using particle charging and electrical detection techniques. A Faraday cage and an aerosol charger, which are basic components of the electrical cascade impactor, were designed and evaluated in this study. The low-level current response of the Faraday cage was investigated with changing particle size and air flow rate by using sodium chloride (NaCl) particles. The response of the prototype Faraday cage was very similar to that of a commercial aerosol electrometer (TSI model 3068) within ${\pm}$5% for singly-charged particles. The response linearity of the prototype Faraday cage could be extended up to flow rate of 30 L/min. For the performance evaluation of the aerosol charger the monodisperse liquid dioctyl sebacate (DOS) particles, with diameters of 0.1∼0.8$\mu\textrm{m}$, were generated using spraying from an atomizer followed by evaporation-condensation process. Typical performance parameters of the aerosol charger such as P$.$n, wall loss, and elementary charges per particle were evaluated. The performance of the prototype aerosol charger was found to be close to that of the aerosol charger used in an electrical low pressure impactor (ELPI, Dekati).

• 한국환경과학회지
• /
• 제22권6호
• /
• pp.773-777
• /
• 2013

This study examined the effects of cage rearing system and backyard raising system on fatty acid profile of egg in laying hens during 9 weeks. Two hundred hens, 70-wk-old, Hy-line Brown, were used in this study and fed basal diets. 100 hens, randomly collected from facility, were transferred to cage rearing system and 100 remaining hens were moved to backyard raising system. For overall period, higher unsaturated fatty acid percentages in two different rearing systems than did saturated fatty acid (SFA) were observed. In unsaturated fatty acid compositions, both rearing system showed a higher mono unsaturated fatty acid (MUFA) contents than poly unsaturated fatty acid (PUFA) contents. Egg quality traits of laying hens reared in backyard system had considerably lower contents of SFA and higher contents of MUFA compared with eggs from cage rearing system (P<0.05). In addition, eggs from cage rearing system resulted in a significantly lower n-3 contents and higher n-6:n-3 ratios and CLA contents in comparison with backyard raising system (P<0.05). However, no significant effects of two different rearing systems on PUFA, PUFA:SFA ratio, and n-6 contents were observed during the experimental period. In conclusion, this result suggests that cage rearing system and backyard raising system will play an important role in improving egg production as functional foods.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.989-996
• /
• 2008

Recently, a few types of fish-cage in open sea are researched. This fish-cage has to operate monitoring system for keeping an optimum living condition for fish. The most efficient monitoring system is WVMS(Wireless Vision Monitoring System) for fish-cage in open sea. WVMS should be able to transmit video signal and communicate with each controller. So. it needs to be based on WLAN(Wireless LAN) which has characteristic of higher transfer-rate, In this paper, we propose a structure of WVMS using WLAN equipments for maritime environment and prove its effectiveness. We present the propagation loss model of WVMS's communication channel. measured by field test, and discuss its validity compared with the predictive value based on the Friss propagation model and Plane earth reflection model. We present the number of frames that is received from WLAN modem connecting with underwater-camera in field test spots. As a result, we confirmed that proposed WVMS is suitable for maritime environment and it is possible to be applied to fish-cage in open sea on 'seogwipo'.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.54-57
• /
• 2004

알루미늄 용해반사로 gas 배출기의 bag cage에서 사용 6개월만에 균열이 발생하였다. 이러한 bag cage의 용접부에서 발생한 균열의 원인조사를 위해 bag cage의 성분분석, 용접부에서의 파단면과 미세조직을 SEM과 금속현미경으로 관찰한 결과 bag cage의 균열의 원인이 배기가스중의 황화물과 대기중의 습기, 산소와 반응에 의해 형성된 Polythionic acid이 생성되어 용접에 의해 예민화 된 부위에 부식을 일으켰다는 것을 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.9-15
• /
• 2017

Recently, flexible cages have been introduced in an attempt to absorb and reduce the abnormal load transfer along the anterior parts of the spine. They are designed to be used with the pedicle screw systems to allow some mobility at the index level while containing ROM at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the flexible cage when combined with pedicle screws with flexible rods. The post-operated models were constructed by modifying the L4-5 of a previously-validated 3-D FE model of the intact lumbar spine (L2-S1): (1) Type 1, flexible cage only; (2) Type 2, pedicle screws with flexible rods; (3) Type 3, interbody fusion cage plus pedicle screws with rigid rods; (4) Type 4, interbody fusion cage plus Type 2; (5) Type 5, Type 1 plus Type 2. Flexion/extension of 10 Nm with a compressive follower load of 400N was applied. As compared to the Type 3 (62~65%) and Type 4 (59~62%), Type 5 (53~55%) was able to limit the motion at the operated level effectively, despite moderate reduction at the adjacent level. It was also able to shift the load back to the anterior portions of the spine thus relieving excessively high posterior load transfer and to reduce stress on the endplate by absorbing the load with its flexible shape design features. The likelihood of component failure of flexble cage remained less than 30% regardless of loading conditions when combined with pedicle screws with flexible rods. Our study demonstrated that flexible cages when combined with posterior dynamic system may help reduce subsidence of cage and degeneration process at the adjacent levels while effectively providing stability at the operated level.

• 한국가금학회지
• /
• 제40권1호
• /
• pp.67-73
• /
• 2013

With an increasing concern on laying hen welfare, barn system has appeared as one of the alternatives to replace the conventional cage. This study was conducted to compare the early laying performance and egg quality at the barn system with those at the conventional cage. A total of 288 shaver-579 brown layers were used for 9 weeks ($21^{st}$ to $30^{th}$ weeks of age) feeding study. Feed consumption and egg weight were significantly (P<0.01) higher at barn than at cage. However, there were no significant differences between two housing systems on hen day egg production (HDEP), egg mass, body weight, feed efficiency and livability. In case of egg quality parameters, shell thickness, albumen height and Haugh unit were significantly (P<0.05) different between two systems. Haugh unit and albumen height were significantly higher in eggs produced at cage (88.97 and 8.16 mm) compared than those produced at barn (83.11 and 6.87 mm), whereas shell thickness was thicker in eggs produced at barn than those produced at cage. Shape index, breaking strength, blood spots and yolk index data were not influenced significantly by the types of housing system. To implement welfare bestowing production, this study showed that the barn system can replace the conventional cage without serious sacrifices on starting phase egg production. In addition, this study suggested that the barn system need to be optimized in view of daily feed consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.887-894
• /
• 2016

This study was conducted to compare the effects of layout of furniture (a perch, nest, and sandbox) in cages on behavior and welfare of hens. Two hundred and sixteen Hyline Brown laying hens were divided into five groups (treatments) with four replicates per group: small furnished cages (SFC), medium furnished cages type I (MFC-I), medium furnished cages type II (MFC-II), and medium furnished cages type III (MFC-III) and conventional cages (CC). The experiment started at 18 week of age and finished at 52 week of age. Hens' behaviors were filmed during the following periods: 8:00 to 10:00; 13:00 to 14:00; 16:00 to 17:00 on three separate days and two hens from each cage were measured for welfare parameters at 50 wk of age. The results showed that feeding and laying of all hens showed no effect by cage type (p>0.05), and the hens in the furnished cages had significantly lower standing and higher walking than CC hens (p<0.05). The birds in MFC-III had significant higher preening, scratching and feather-pecking behavior than in the other cages (p<0.05). No difference in nesting behavior was found in the hens between the furnished cages (p>0.05). The hens in MFC-I, -II, and -III showed a significant higher socializing behavior than SFC and CC (p<0.05). The lowest perching was for the hens in SFC and the highest perching found for the hens in MFC-III. Overall, the hens in CC showed poorer welfare conditions than the furnished cages, in which the feather condition score, gait score and tonic immobility duration of the hens in CC was significantly higher than SFC, MFC-I, MFC-II, and MFC-III (p<0.05). In conclusion, the furnished cage design affected both behavior and welfare states of hens. Overall, MFC-III cage design was better than SFC, MFC-I, and MFC-II cage designs.

• Journal of Korean Neurosurgical Society
• /
• 제41권2호
• /
• pp.111-117
• /
• 2007

Objective : The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. Methods : A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. Results : In overall, 26 [83.9%] of 31 showed excellent or good outcomes. Thirteen percent [4 cases] of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven [22.6%] patients had reconstruction failure:5 [20.8%] in the 1-level corpectomy group and 2 [28.5%] in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. Conclusion : Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconstruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.