• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.243-252
• /
• 2010

This paper describes a new practical simplification method for feature-based solid models. In this approach, a solid model created using feature modeling operations is first simplified by the suppression of detailed features, and then, if necessary, the model is converted to a surface model to facilitate its modification. Finally, the simplified surface model is delivered to analysis packages. The algorithm was implemented based on CATIA V.5 and applied to mid-surface generation of plastic parts for structural analysis to prove the validity and usefulness.

• Journal of Computational Design and Engineering
• /
• 제1권2호
• /
• pp.88-95
• /
• 2014

Because the cost of performance testing using actual products is expensive, manufacturers use lower-cost computer-aided design simulations for this function. In this paper, we propose using hexahedral meshes, which are more accurate than tetrahedral meshes, for finite element analysis. We propose automatic hexahedral mesh generation with sharp features to precisely represent the corresponding features of a target shape. Our hexahedral mesh is generated using a voxel-based algorithm. In our previous works, we fit the surface of the voxels to the target surface using Laplacian energy minimization. We used normal vectors in the fitting to preserve sharp features. However, this method could not represent concave sharp features precisely. In this proposal, we improve our previous Laplacian energy minimization by adding a term that depends on multi-normal vectors instead of using normal vectors. Furthermore, we accentuate a convex/concave surface subset to represent concave sharp features.

• 대한기계학회논문집A
• /
• 제33권2호
• /
• pp.135-144
• /
• 2009

In this present work, spline FEA for the trimmed NURBS surface of the 2D linear elasticity problem is presented. The main benefit of the proposed method is that no additional efforts for modeling of trimmed NURBS surfaces are needed and the information of the trimming curves and trimmed surfaces exported from the CAD system can be directly used for analysis. For this, trimmed elements are searched by using NURBS projection scheme. The integration of the trimmed elements is performed by using the NURBS-enhanced integration scheme. The formulation of constructing stiffness matrix of trimmed elements is presented. In this formulation, the information of the trimming curve is used for calculating the Jacobian as well as for obtaining integration points. The robustness and effectiveness of the proposed method are investigated through various numerical examples.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.119-126
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one path but multi-path. By the way, in machining, higher precision and the reduction of leading and machining time is required. But, for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.48-68
• /
• 2000

The high-speed machining technology of difficult-to-cut material is needed to achieve the high-efficiency of die manufacturing. The high-speed machining is applied in automobile, airplane and electricityㆍelectro industry etc, because it can improve machining efficiency and productivity with high speed, high power and high rotation. In this study, high speed machinability, tool wear characteristics and its monitoring, characteristics of damaged layer, machinability of difficult-to-cut material, characteristics of a free curved surface and method of CAD/CAM system were introduced to acquire the shortening of machining time, the improvement of machining efficiency and the high quality of machined surface. Therefore, we establish the stabilization condition of difficult-to-cut material machining and present the optimal cutting condition for high-efficiency cutting.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1992년도 춘계공동학술대회 발표논문 및 초록집; 울산대학교, 울산; 01월 02일 May 1992
• /
• pp.299-308
• /
• 1992

Determining tool-approach directions is an important issue when an effort is made to transfer CAD data into manufacturing automatically. An algorithm is developed to determine whether a given part can be machined on a three-axis milling machine. lf a set of feasible tool-approach directions exists for a sculptured surface, the NC tool path and G-codes for machining the surface on a three-axis milling machine can be generated automatically by an NC tool path generation algorithm. The algorithm can be used for orientation and fixturing of the workpiece for interference free machining. The algorithm can also be applied to checking the translational separability of polyhedral parts in automatic assembly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권7호
• /
• pp.771-781
• /
• 2006

Car acceleration or deceleration induce the surface slope of liquid fuel in the LNG tank. Slope changes the surface area wetted by liquid fuel in the tank and consequently heat leak to the tank. The Fortran program, 'Pro-Heatleak', is developed to evaluate heat leak on LNG tank. The verification test proves the high accuracy of the developed program. The difference between MathCad and computational results is less than 0.07 %. Computational analyses of heat leak are carried out for 10 gallons and 20 gallons of fuel vapor in the tank. With the increasing of fuel vapor volume by 10 percent the wetted surface area and heat leak respectively decrease by 13 percent. The difference between maximum and minimum heat leak is about 10 percent for both 10 gallons and 20 gallons of fuel vapor in the tank.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.111-124
• /
• 2001

In this paper, we propose rounding operations on shell meshes, which give a constant or variable radius of rounding directly to sharp edges on a shell mesh. The rolling-ball methods for freeform surface rounding are introduced to devise the algorithms for these operations. Our algorithms consists of three steps as follows: detecting sharp edges, generating a rolling-ball surface contacting with two face groups adjacent to the sharp edges, and then replacing the rounding area of the original mesh with the mesh generated on the rolling-ball surface. In addition, this paper shows their application to the area of stamping die design. These operations enable CAE engineers to directly change the meshes of stamping tools without modification of CAD models for dies and regeneration of their meshes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.162-169
• /
• 1995

An improved nonparametric tool description based on successive refined monparametric patches is proposed and therlated criterion for refinement is also discussed . In the proposed sheme, any required order of tool surface conformity can be achieved by employing successive refinements accoring to the suggested criterion. By using the suggested adaptive tool refinement technique based on the nonparametric patch tool description, the locally refined nonparametric tool surface with economic memory size and sufficient accuracy as well as with favorable charateristics for contact treatment can be obtained directly form the parametric patch related with commerical CAD system. Computation is carried out for a chosen complex sheet forming example of an actual autobody panel in order to verify the validity and the efficiency of the developed tool surface description.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.647-652
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one patch but multi-patch. By the way, in machining, higher precision and the reduction of leading and machining time is required. But for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.