• International Journal of Automotive Technology
• /
• 제3권2호
• /
• pp.47-52
• /
• 2002

The integration of CAD/CAM/CAE in product development is the key to realize concurrent engineering. Generally, different systems are employed in product development departments. These different systems create a lot of trout)toes such as difficulty in communication, misunderstanding and so on. A new approach to integrate CAD/CAM/CAE in one system based on CATIA thor the end-to-end process in cylinder head development is presented. Hulti Model Technology (MMT) is used to create consistent and associated CAD models for the end-to-end process in cylinder head development. The concept and method to create and organize multi models are discussed. A typical four-layer structure of HHT for mechanical products is defined. The multi level structure of the cylinder head models based on MMT is provided. The CAD models of cylinder head created based on MMT can be used as the consistent model. All models in the downstream of cylinder head development such as structure analysis, CFD, sand core design , casting simulation and so oil are associated with the CAD models. Practice shows the approach in this paper enables the development process to be carried concurrently and can obviously shorten time to the market, reduce product cost and improve product quality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1187-1192
• /
• 2003

The computer is an important tool to design an engineering system and CAD systems are widely used for various design practice. To meet the market requirements, the old mass production system is being changed into the mass customization system. As for CAD systems, it is increasingly required to extend, automate, and customize a wide range of functionality. This article describes the state-of-the-art of the principal technologies for customizing CAD systems. And we have implemented an application that enables the parametric design by directly inputting numerical values of parameters for a CAD model. Based on this application, we have developed another system that makes it possible sharing of part family data between SolidEdge and Pro/Engineer. Through customization of CAD systems, it is possible to improve the product quality using external knowledge-based systems or to integrate with external system such as CAE tools. This paper can be a guide for engineering designers who want to customize CAD systems.

• 한국경영과학회지
• /
• 제21권3호
• /
• pp.127-141
• /
• 1996

In this paper, we propose a 7-phase life cycle model which applies to Computer Integrated Manufacturing systems. The model emphasizes product design and manufacturing design activities of CIM to secure the critical success factors of CIM systems such as high quality, adaptability, productivity, and flexibility. It is argued that the product design aspect would be divided into three phases-conceptual design, embodiment design, and detialed design. The conceptual design phase is to build a conceptual model of the product based on requirements and specifications which reflect "the voice of the customer". THe embodiment design phase utilizes specific design tools such as DFM, CAE, and CAD, and results in a concrete model of the product and parts. The detailed design phase is to crete a working prototype of the product and design tools such as DFA. CAD and CAM are employed in this phase. The output of the product design activity is to be the input for the manufacturing design activity. Using the proposed model, one can effectively and efficiently manufacture a high-quality, low-cost product with short delivery time, and above all achieve customer'ssatisfaction.isfaction.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.274-283
• /
• 2005

Product data quality (PDQ) is a real and significant issue in today's manufacturing environment. In the Korean automotive industry, much of the design work takes place with the support of software tools, such as CAD systems. Although many designers frequently encounter quality problems regarding product data, there is no investigation into the present state of CAD usage and PDQ activities before. The Korean automotive industry is responsible for about 11.1 percent of the total value of manufactured goods in Korea and 7.9 percent of employment in manufacturing. A study performed by the Research Triangle Institute showed that imperfect interoperability imposes at least $\$1$ billion per year on the members of the U.S. automotive supply chain. The trends toward concurrent engineering and out-sourcing have elevated the importance of high-quality product data and efficient product data exchange. This paper shows the results from a survey of PDQ conducted on seven 1st tiers among members of the Korean automotive supply chain.

• Advances in Computational Design
• /
• 제5권1호
• /
• pp.13-34
• /
• 2020

As small size and complex metal machining components demand increases, cutting processes in microscale become necessary. Ball-end milling is a commonly used finishing process, which nowadays can be applied in the microscale size. Surface quality and dimensional accuracy are two basic parameters that affect small size components in their assembly and functionality. Thus, good quality can be achieved by optimizing the cutting conditions of the procedure. This study presents a 3D simulation model of ball-end milling in microscale developed in a commercial CAD software and its optical and computing results. These carried out results are resumed to surface topomorphy, surface roughness, chip geometry and cutting forces calculations that arising during the cutting process. A great number of simulations were performed in a milling machine centre, applying the discretized kinematics of the procedure and the final results were compared with measurements of Al7075-T651 experiments.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5243-5250
• /
• 2013

최근 국내 건축시장에서는 건설프로젝트 생애주기 전반에 걸쳐 생산되는 정보를 3D 모델 기반으로 관리하는 BIM에 대한 관심이 높아지고 있다. 국가적으로도 그에 따른 정책, 기술개발의 진행과 함께, BIM을 이용한 설계기준이 제도화 되고 있다. 그러나 BIM 소프트웨어(Revit Architecture)를 이용한 2D 설계도면 작성과 관련해서는 기존의 CAD와 같은 수준의 실시설계도면 작성이 어려운 것으로 인식되고 있다. 기존 연구에 따르면, BIM 소프트웨어가 가지고 있는 문제점으로는 시공수준의 접합상세가 나오지 않는다는 문제점과 효과적으로 상세를 더할 수 있는 모델링 기능이 부족하다는 문제점이 지적되고 있다. 이에 본 연구에서는 BIM 소프트웨어를 사용하여 현재 납품되고 있는 2D 실시설계도면 수준의 도면작성과 출력가능 여부를 검증하고자 한다. 이를 위해 설계기본요소를 분석하고, 단면상 세도를 사례로 BIM 소프트웨어에 제공되는 기능을 사용해 기존 CAD로 작성한 실시설계도면과 동일한 수준의 도면작성과 출력이 가능함을 검증하였다.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.1-12
• /
• 1993

CAD, CAE, CAM, Database, Expert System등 다종의 응용프로그램으로 구성된 CIM 환경에서 Product Model의 역할은 Data 공유를 통한 System Integration이다. 이를 위하여 Product Model은 생산 활동에 포함되는 모든 정보를 관리한다. 이러한 정보의 종류에는 형상정보, 공정정보, 일정정보, 품질정보, 그리고 기존의 관리정보가 포함된다. Product Model의 Architecture에는 Product Model Kernel, Object Schema, 모델조작언어, 그리고 사용자 인터페이스 등이 있다. Product Model 을 통하여 공유될 객체들은 모델조작언어를 통하여 정의되고 그 정의는 Object Schema에 저장된다. 본 논문에서는 Product Model의 설계와 CAPP(Computer Aided Process Planning)프로그램을 통한 프로토타입의 구현을 설명한다.

• 해양환경안전학회지
• /
• 제20권1호
• /
• pp.113-119
• /
• 2014

우리 해군은 함정 제품모델(Naval Ship Product Model, NSPM)을 중심으로 하는 협업 제품개발 환경 구축을 통해 설계 데이터의 재사용성과 M&S의 활용도를 높이고 있다. 그 결과 설계결과의 신뢰성이 높아지고 있으며, 이를 활용한 운영, 건조 시뮬레이션을 통해 소요군의 요구사항이 면밀히 반영되도록 하는 연구도 진행 중에 있다. 이에 따라 설계 데이터의 DB 구축 및 그 품질에 대한 중요성이 부각되고 있으나, 그와 관련된 연구는 초기상태에 머물러 있는 실정이다. 본 연구에서는 저자들의 선행연구 결과인 함정 제품모델의 품질검증 방법론에 기초하여 함정 제품모델을 구성하고 있는 형상요소의 구체적인 품질검증 방안과 이를 자동화하기 위한 연구를 수행하였다. 함정 제품모델 데이터 중 상대적으로 중요하며, 검증과정에 많은 시간이 소요되고 있는 선각모델을 사례연구 대상으로 정의하였으며, 자동차산업에서 사용되고 있는 제품데이터품질(Product Data Quality, PDQ)을 형상검증 기준으로 활용하였다. 최종적으로 선각모델의 형상 품질검증을 위한 기준과 알고리즘을 제안하였으며 이에 기반 한 초기 시스템을 개발하였다.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.231-240
• /
• 2006

Immersive virtual reality (VR) for the manufacturing planning helps to shorten the planning times as well as to improve the quality of planning results. However, VR equipment is expensive, both in terms of development efforts and device. Engineers also spend time to manually repair erroneous 3-D shape because of imperfect translation between 3-D engineering CAD model and VR system format. In this paper a method is proposed to link 3-D engineering CAD model to a multichannel visualization system with PC clusters. The multichannel visualization module enables distributed computing for PC clusters, which can reduce the cost of VR experience while offering high performance. Each PC in a cluster renders a particular viewpoint of a scene. Scenes are synchronized by reading parameters from the master scene control module and passing them to client scenes.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.848-853
• /
• 2005

3D geometric modeling of an object of interest has been intensively investigated in many fields including CAD/CAM and computer graphics. Traditionally, CAD and geometric modeling tools are widely used to create geometric models that have nearly the same shape of 3D real objects or satisfy designers intent. Recently, with the help of the reverse engineering (RE) technology, we can easily acquire 3D point data from the objects and create 3D geometric models that perfectly fit the scanned data more easily and fast. In this paper, we present 3D geometric model generation based on a stereo vision system (SVS) using random pattern projection. A triangular mesh is considered as the resulting geometric model. In order to obtain reasonable results with the SVS-based geometric model generation, we deal with many steps including camera calibration, stereo matching, scanning from multiple views, noise handling, registration, and triangular mesh generation. To acquire reliable stere matching, we project random patterns onto the object. With experiments using various random patterns, we propose several tips helpful for the quality of the results. Some examples are given to show their usefulness.