• Title/Summary/Keyword: CA15-3

Search Result 2,020, Processing Time 0.033 seconds

A Study on Ethanol fermentation by Immobilized yeast. (고정화 효모를 이용한 Ethanol 발효)

  • 이한창
    • Journal of the Korean Professional Engineers Association
    • /
    • v.21 no.2
    • /
    • pp.13-18
    • /
    • 1988
  • A Study for ethanol fermentation with immobilized yeast that is entrapped to Ca-alginate beads and batch system was carried out using molasses as substrate. The results are as follows. 1. The yield of alcohol fermentation is more efficacious then that of conventional fermentation process. The beads were used 15times and got a result of fermentation yield rate 89. 57%∼92.35%f, which is comparable with the rate of 86.3% gained from the conventional fermentation process. 2. The concentration of Ca-alginate was 1∼5% For long run use (2520 hours) it is necessary 2% or more concentration of Ca-alginate. 3. The amount of the yeast cells for entrap to Ca-alginate beads was required 1.0g (indried material) or more for 200g Ca-alginate beads.

  • PDF

Risk for Malignant and Borderline Ovarian Neoplasms Following Basic Preoperative Evaluation by Ultrasonography, Ca125 Level and Age

  • Karadag, Burak;Kocak, M.;Kayikcioglu, F.;Ercan, F.;Dilbaz, B.;Kose, M.F.;Haberal, A.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.19
    • /
    • pp.8489-8493
    • /
    • 2014
  • Objective: To verify the basic preoperative evaluation in the discrimination between benign and malignant adnexal masses in our clinical practice. Materials and Methods: Data were collected on the records of 636 women with adnexal masses who had undergone surgery either by open or endoscopic approaches. Those with obvious signs of malignancy, any history of cancer, emergency surgeries without basic evaluation were excluded. The preoperative features by age, ultrasound and serum Ca125 level were compared with final histopathological diagnosis at the four departments of the institution. These are the general gynecology (Group 1: exploratory laparotomy), the gynecologic endoscopy (Group 2: laparoscopy and adnexectomy), the gynecological oncology (Group 3: staging laparotomy) and the gynecologic endocrinology and infertility (Group 4: laparoscopy and cystectomy). Results: There were simple and complex cyst rates of 22.3% and 77.2%, respectively. There were 86.3% benign, 4.1% (n:20) borderline ovarian tumor (BOT) and 6.4% (n:48) malignant lesions. There were 3 BOT and 9 ovarian cancers in Group 1 and one BOT and two ovarian cancer in the Group 2. During the surgery, 15 BOT (75%) and 37 ovarian cancer (77%) were detected in the Group 3, only one BOT was encountered in the Group 4. The risk of rate of unsuspected borderline or focally invasive ovarian cancer significantly increased by age, size, complex morphology and Ca125 (95% CI, OR=2.72, OR=6.60, OR=6.66 and OR=4.69, respectively). Conclusions: Basic preoperative evaluation by comprehensive ultrasound imaging combined with age and Ca125 level has proved highly accurate for prediction of unexpected malignancies. Neither novel markers nor new imaging techniques provide better information that allow clinicians to assess the feasibility of the planned surgery; consequently, the risk of inadvertent cyst rupture during laparoscopy may be significantly decreased in selected cases.

The Design of Oxide Module for High Temperature Thermoelectric Power Generation (고온 발전용 산화물 열전모듈의 설계)

  • Park, Jong-Won;Yoon, Sun-Ho;Cha, Jeong-Eui;Choi, Seung-Chul
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.15 no.4
    • /
    • pp.93-100
    • /
    • 2008
  • The one and two pair of oxide modules for high temperature thermoelectric power generation were fabricated with $Ca_{2.7}Bi_{0.3}Co_4O_9$(p-type) and $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$(n-type) on $Al_2O_3$ substrate. For the optimizing of the design process, contact resistance was derived from the results of the one pair modules, and then the resistance of two pair modules were calculated to use the derived data. Those values were compared with the measured values for the optimizing of this design process. The resistance of calculated and measured two pairs modules was 0.956 $\Omega$ and 1.110 Q $\Omega$ $T_h$=833 K, respectively, the difference of resistance was about 0.15 $\Omega$. From the result, proposed design process is effective for high temperature thermoelectric oxide modules fabrication.

  • PDF

Effects of Different Carbon Dioxide and Oxygen Concentration on the Quality of Oriental Melon during CA Storage (참외 CA저장시 $CO_2$$O_2$농도에 따른 품질 변화)

  • 이숙희;김창배;서영진;김찬용;윤재탁
    • Food Science and Preservation
    • /
    • v.6 no.4
    • /
    • pp.386-391
    • /
    • 1999
  • Oriental melon was stored in controlled atmospheres(5, 10 or 15% CO$_2$in combination with 3 or 10% O$_2$) and air as control, and was analyzed half monthly during a 45-day storage for various quality Parameters. Oriental melon which stored in CA condition was lower in weight loss and decay rate than that stored in air. There was no significant difference in firmness by CO$_2$or O$_2$concentration during a month of storage. Fruits stored in 10% CO$_2$+3% O$_2$showed higher level of soluble solids, Vitamin C content and L value than other condition. And also comparatively lower endogenous ethanol accumulation and better state of quality was observed in that condition.

  • PDF

Electrical Characteristics of ($Sr_{0.85}Ca_{0.15})TiO_3$ Thin Film by RF Sputtering Method (RF 스퍼터링법에 의한 ($Sr_{0.85}Ca_{0.15})TiO_3$ 박막의 전기적 특성)

  • 장원석;김진사;최운식;김충혁;이준웅
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1998.11a
    • /
    • pp.239-242
    • /
    • 1998
  • The (S $r_{0.85}$C $a_{0.15}$)Ti $O_3$ (SCT) thin films are deposited on Pt-coated electrode using RF magnetron sputtering method at various substrate temperature. Dielectric constant of SCT thin films is increased with increased as the deposition temperature and changes almost linearly in temperature ranges from -80 to +90[$^{\circ}C$]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz]. V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature.ure.

  • PDF

Microstructure and Properties of $(Sr_{0.85}Ca_{0.15})TiO_3$ Thin Film with Annealing Temperature (열처리온도에 따른 $(Sr_{0.85}Ca_{0.15})TiO_3$박막의 구조 및 특성)

  • 김진사;조춘남;신철기;최운식;김충혁;이준웅
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.14 no.10
    • /
    • pp.802-807
    • /
    • 2001
  • The (S $r_{0.85}$C $a_{0.15}$)Ti $O_{3}$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/ $SiO_2$/Si) using RF sputtering method. The composition of SCT thin films deposited on Si substrate at woom temperature is close to stoichiometry(1.102 in A/B ratio). The maximum dielectric constant of SCT thin films is obtained by annealing at 600[$^{\circ}C$]. The capacitance characteristics had a stable value within $\pm$4[%]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz]. SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequencey.cey.

  • PDF

Synthesis of Calcium sulfoaluminate Usng Industrial By-products and Wastes (산업 부산물을 이용한 칼슘설포알루미네이트의 합성)

  • 문정호;이범재;노재성
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1998.10b
    • /
    • pp.888-893
    • /
    • 1998
  • Calcium sulfoaluminate, $C_4$A$_3$$\bar{S}$, was prepared for reutilizing industrial by-products, such as II-CaSO$_4$, Al(OH), CaF$_2$ and cement sludge wastes. Mixed powder was fired at 1,15$0^{\circ}C$. $C_4$A$_3$$\bar{S}$ clinkers fired at 1,15$0^{\circ}C$ were analyzed by SEM and XRD. Also were added in cement paste and mortar and characterized as setting time, flow values and compressive strength. $C_4$A$_3$$\bar{S}$ could be found in the X-ray diffraction pattern. The setting time of cement pastes added clinkers fired at 1,15$0^{\circ}C$ was shorter than that of ordinary portland cement. Also the compressive strengths of the cement mortar added clinkers was higher than those of ordinary portland cement.

  • PDF

Carnosic acid protects against acetaminophen-induced hepatotoxicity by potentiating Nrf2-mediated antioxidant capacity in mice

  • Guo, Qi;Shen, Zhiyang;Yu, Hongxia;Lu, Gaofeng;Yu, Yong;Liu, Xia;Zheng, Pengyuan
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.20 no.1
    • /
    • pp.15-23
    • /
    • 2016
  • Acetaminophen (APAP) overdose is one of the most common causes of acute liver failure. The study aimed to investigate the protective effect of carnosic acid (CA) on APAP-induced acute hepatotoxicity and its underlying mechanism in mice. To induce hepatotoxicity, APAP solution (400 mg/kg) was administered into mice by intraperitoneal injection. Histological analysis revealed that CA treatment significantly ameliorated APAP-induced hepatic necrosis. The levels of both alanine aminotransferase (ALT) and aspartate transaminase (AST) in serum were reduced by CA treatment. Moreover, CA treatment significantly inhibited APAP-induced hepatocytes necrosis and lactate dehydrogenase (LDH) releasing. Western blot analysis showed that CA abrogated APAP-induced cleaved caspase-3, Bax and phosphorylated JNK protein expression. Further results showed that CA treatment markedly inhibited APAP-induced pro-inflammatory cytokines TNF-${\alpha}$, IL-$1{\beta}$, IL-6 and MCP-1 mRNA expression and the levels of phosphorylated $I{\kappa}B{\alpha}$ and p65 protein in the liver. In addition, CA treatment reduced APAP- induced hepatic malondialdehyde (MDA) contents and reactive oxygen species (ROS) accumulation. Conversely, hepatic glutathione (GSH) level was increased by administration of CA in APAP-treated mice. Mechanistically, CA facilitated Nrf2 translocation into nuclear through blocking the interaction between Nrf2 and Keap1, which, in turn, upregulated anti-oxidant genes mRNA expression. Taken together, our results indicate that CA facilitates Nrf2 nuclear translocation, causing induction of Nrf2-dependent genes, which contributes to protection from acetaminophen hepatotoxicity.

Luminescence Characteristics and Crystal Structure of CaWO4-Li2WO4-Eu2O3 Phosphors (CaWO4-Li2WO4-Eu2O3계 형광체의 PL 특성과 결정구조)

  • Kim, Jeong-Seog;Choi, Jin-Ho;Jeong, Bong-Man;Kang, Hyun-Ju
    • Journal of the Korean Ceramic Society
    • /
    • v.43 no.1 s.284
    • /
    • pp.10-15
    • /
    • 2006
  • Photoluminescence (PL) and crystal structures of the $(l-x)CaWO_4-xLi_2WO_4$ binary system added with $Eu_2O_3$ activator have been characterized. The $CaWO_4\;and\;Li_2WO_4$ have the scheelite and phenakite structures respectively. The $CaWO_4-Li_2WO_4-Eu_2O_3$ phosphors show the red luminescence of 613 nm peak wavelength. The wavelength range of excitation spectral band is $380\~470$ nm with the peak wavelength of 397 nm. The $0.88(0.5CaWO_4-0.5Li_2WO_4)-0.12Eu_2O_3$ showed the most superior luminescence characteristics. The effect of co-doping elements such as $Al_2O_3$ and rare-earth oxides on PL has been characterized. The co-doping elements deteriorated the luminescence intensity except the $Al_2O_3$ and $Gd_2O_3$. The PL characteristics of $CaWO_4-Li_2WO_4-Eu_2O_3$ phosphors have been compared to those of the alkali europium double molybdates (tungstates) of scheelite-related structure such as $LiEu(MoO_4)_2$ and $CsEu(MoO_4)_2$. The crystal structures of $(l-y)[(l-x)CaWO_4-xLi_2WO_4]-yEu_2O_3$ phosphors have been characterized using XRD data and rietveld refinement.

Microwave Dielectric Properties of (${Pb_{0.2}}{Ca_{0.8}}$)[$({Ca_{1/3}}{Nb_{2/3}})_{1-x}{Ti_x}$]$O_3$ Ceramics (Microwave Dielectric Properties of (${Pb_{0.2}}{Ca_{0.8}}$)[$({Ca_{1/3}}{Nb_{2/3}})_{1-x}{Ti_x}$$O_3$ 세라믹스의 마이크로파 유전특성)

  • Kim, Eung-Soo;Kim, Yong-Hyun;Kim, Jun-Chul;Bang, Kyu-Seok
    • Korean Journal of Materials Research
    • /
    • v.11 no.8
    • /
    • pp.708-712
    • /
    • 2001
  • Microwave dielectric properties of $(Pb_{0.2}Ca_{0.8})[(Ca_{1/3}Nb{2/3})_{1-x}Ti_x]O_3$ ceramics were investigated as a function of $Ti^{4+}$ content (0.05$\leq$x$\leq$0.35). A single perovskite phase was obtained from x=0.05 to x=0.15, and $TiO_2$ and $CaNb_2O^6$ were detected as a secondary phase beyond x=0.2. The structure was changed from orthorhombic at x=0.05 to cubic at x=0.35. Dielectric constant(K) was increased with increase of $Ti^{4+}$ content due to increase of rattling effect, and was inversely proportional to the cube of the average radius of B-site cation, however, Qf value was decreased, which was due to the decrease of grain size and the secondary phase. With the increase of $Ti^{4+}$ content, the temperature coefficient of resonant frequency(TCF) was controlled from -27.36 ppm/$^{\circ}C$ value to +18.4 ppm/$^{\circ}C$ value, which was caused by the influence of tolerance factor(t) and the bond valence of B-site. Typically, K of 51.67, Qf of 7268(GHz), TCF of 0 ppm/$^{\circ}C$ were obtained in the $(Pb_{0.2}Ca_{0.8})[(Ca_{1/3}Nb_{2/3})_{0.8}Ti_0.2]O_3$ sintered at 13$50^{\circ}C$ for 3h.

  • PDF