• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.2060-2069
• /
• 2017

Newcastle disease is a serious infectious disease in the poultry industry. The commercial vaccines can only offer limited protection and some of them are expensive and need adjuvants. At present, DNA vaccines are widely used. However, the immune responses induced by DNA vaccines are too slow and low. Here, we constructed the transfer vectors with a different number of C3d as molecular adjuvants (n = 1, 2, 4, or 6), and the vectors were cloned into the optimal eukaryotic expression plasmid (pVAXI-optiF) that expressed the F gene of Newcastle disease virus (NDV), and named pVAXI-F(o)-C3d1, pVAXI -F(o)-C3d2, pVAXI-F(o)-C3d4, and pVAXI-F(o)-C3d6, respectively. Cell transfection test indicated that pVAXI-F(o)-C3d6 showed the highest expression. In vivo immunization showed that the chickens immunized with pVAXI-F(o)-C3d6 intramuscularly induced better immune responses than the chickens immunized with the other plasmids. The protective efficacy of pVAXI-F(o)-C3d6 was 80% after challenge with the highly virulent NDV strain F48E9. The results in this study showed that C3d6 could be used as a molecular adjuvant to quickly induce an effective immune response to control NDV.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.52-57
• /
• 1999

The anionic complexes, [ln($C_6F_5)_4$]-, which are thermal and moisture sensitive, have been prepared by the reaction of In($C_6F_5)_3{\cdot}D(D=CH_3CN$, O($C_2H_5)_2$) with the system ($CH_3)_3SiC_6F_5$/CsF, $C_6F_5$MgBr or Cd($C_6F_5)_2$. The stable anionic indium(III) complexes are obtained through cation exchange with PNPCI ([PNP]= bis(triphenylphosphino)ammonium). The pure substance is obtained by column chromatography. These new anionic complexes are unambiguously identifed by NMR-spectroscopy, IR spectroscopy, molecular weight, DTA/TG and elemental analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.459-459
• /
• 2012

Recently, the discharge of global warming gases in dry etching process of TFT-LCD display industry is a serious issue because perfluorocarbon compound (PFC) gas causes global warming effects. PFCs including CF4, C2F6, C3F8, CHF3, NF3 and SF6 are widely used as etching and cleaning gases. In particular, the SF6 gas is chemically stable compounds. However, these gases have large global warming potential (GWP100 = 24,900) and lifetime (3,200). In this work, we chose C3F6O gas which has a very low GWP (GWP100 = <100) and lifetime (< 1) as a replacement gas. This study investigated the effects of the gas flow ratio of C3F6O/O2 and process pressure in dual-frequency capacitively coupled plasma (CCP) etcher on global warming effects. Also, we compared global warming effects of C3F6O gas with those of SF6 gas during dry etching of a patterned positive type photo-resist/silicon nitride/glass substrate. The etch rate measurements and emission of by-products were analyzed by scanning electron Microscopy (SEM; HITACI, S-3500H) and Fourier transform infrared spectroscopy (FT-IR; MIDAC, I2000), respectively. Calculation of MMTCE (million metric ton carbon equivalents) based on the emitted by-products were performed during etching by controlling various process parameters. The evaluation procedure and results will be discussed in detail.

• Journal of Environmental Health Sciences
• /
• v.42 no.2
• /
• pp.112-117
• /
• 2016

Objectives: In this study, we investigated the biodegradation rates of 8 perfluorooctanesulfonate (PFOS) alternatives synthesized at the at Changwon National University in comparison to those of PFOS potassium salt and PFOS sodium salt. Methods: A biodegradability test was performed for 28 days with microorganisms cultured in the good laboratory practice laboratory at the Korea Environment Corporation following the OECD Guidelines for the testing of chemicals, Test No. 301 C Results: While $C_5H_8F_3SO_3K$, $C_8F_{17}SO_3K$ and $C_8F_{17}SO_3Na$ were not degraded after 28 days, the 3 alternatives were biodegraded at the rates of 31.4% for $C_8H_8F_9SO_3K$, 25.6% for $C_{10}H_8F_{13}SO_3K$, 23.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.9% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.5% for $C_{23}F_{18}H_{28}S_2O_8Na_2$, 8.5% for $C_{17}F_9H_{25}S_2O_8Na_2$ and 4.8% for $C_6H_8F_5SO_3K$. When the concentration was the same(500 mg/L), $C_{23}F_{18}H_{28}S_2O_8Na_2$ had the lowest tension with 20.94 mN/m, which was followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.36 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.31 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.17 mN/m), $C_{10}H_8F_{13}SO_3K$ (29.77 mN/m) and $C_8H_8F_9SO_3K$ (33.89 mN/m). Having higher surface tension of 57.64 mN/m and 67.57 mN/m, respectively, than those of the two types of PFOS salts, $C_6H_8F_5SO_3K$ and $C_5H_8F_3SO_3K$ were found valueless as substitute for PFOS. Conclusion: The biodegradation test suggest that 6 compounds could be used as substitutes for PFOS. $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{15}F_9H_{21}S_2O_8Na_2$ were found to be the best substitutes based on biodegradation rate and surface tension, followed by $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, $C_8H_8F_9SO_3K$ and $C_{10}H_8F_{13}SO_3K$. $C_{17}F_9H_{25}S_2O_8Na_2$ was found to have relatively low value as an alternative but it still had a potential to substitute the conventional PFOS.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.629-637
• /
• 1998

The HF-SCF, MP2 and B3LYP calculations have been performed on the two conceivable clusters $(HF)_2(CO)$ trimers as well as their dimer complexes FH…FH, FH…CO and FH…OC applying $6-31+G^{\ast}^{\ast}$, and $6-311+G^{\ast}^{\ast}$ basis sets. A variety of ground state properties of these trimer complexes have been listed, and compared with corresponding properties of isolated monomers and combined dimers. It was calculated that FH…CO is more stable than FH…OC by average 0.85 kcal/mol and F-H…F-H…C≡O is more stable than F-H…F-H…O≡C by 1-2 kcal/mol. The C≡O stretching bands of the F-H…F-H…C≡O and F-H…F-H…O≡C were red shifted by 24, $37\;cm^{-1}$ compared with the FH…CO and FH…OC respectively. Also, H-F stretching bands were red shifted by 54 and $353\;cm^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.765-772
• /
• 1993

Two-dimensional potassium tetratitanate ($K_2Ti_4O_9$) and three-dimensional potassium hexatitanate ($K_2Ti_6O_{13}$) fibers have been prepared by the combined method consisting of the flux melting (1150$^{\circ}C$)-slow cooling (cooling rate = 5$^{\circ}C$/h) process from the starting raw materials of $K_2CO_3$, and $TiO_2$ with the flux of $K_2MoO_4$. It was found that the fiber growth reaction is strongly dependent upon the mole ratio of flux (F) to raw material (R), which is 7 : 3 (F : R) as for the optimum growth condition. Relatively long fibers (average length ${\thickapprox}$ 4 mm) with a mixture of $K_2Ti_4O_9$ (major) and $K_2Ti_6O_{13}$ (minor) could be obtained when the reaction was carried out for the $K_2MoO_4-$K_2O{\cdot}4TiO_2$ (F : R = 7 : 3) system, but for the $K_2$MoO_4$-$K_2O{\cdot}6TiO_2$ (F : R = 7: 3) one, only the short fibers with ${\thickapprox}$ 2 mm long could be grown as the mixed phase of $K_2Ti_6O_{13}$ and $K_2Ti_4O_9$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6029-6038
• /
• 2013

In this study we attempt to modify the backbone structure and improve processibility of PBO having high melting and glass transition temperature. A series of aromatic poly(o-hydroxyamide)s(PHAs) were synthesized by direct polycondensaton of diacides containing diimide unit with two types of bis(o-aminophenol)s including 3,3'-dihydroxybenzidine and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. PHAs were studied by FT-IR, $^1H$-NMR, DSC and TGA. PHAs exhibited inherent viscosities in the range of 0.34~0.65 dL/g at $35^{\circ}C$ in DMAc solution. The PHA 1 and 6F-PHA 6, introducing o-phenylene unit in the main chain showed excellent solubilities in aprotic solvents such as NMP etc. However, the PHA 3, having p-phenylene unit was not even dissolved perfectly with LiCl salt. 6F-PHAs were readily soluble at room temperature in aprotic solvents except 6F-PHA 3. But they showed better solubility than that of PHAs. The polybenzoxazoles(PBOs) were quite insoluble in other solvents except partially soluble in sulfuric acid. PBOs exhibited relatively high glass transition temperatures(Tg) in the range of 306~$311^{\circ}C$ by DSC. The maximum weight loss temperature and char yields of PHA3 and 6F-PHA3 showed the highest values of $658^{\circ}C$ and $653^{\circ}C$, 62.6 % and 62.1 %, respectively.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.214-220
• /
• 1991

The effects of $SiO_2$ reactive ion etching (RIE) in $CHF_{3/}C_2F_6$ on the surface properties of the underlying Si substrate were studied by X-ray photoelectron spectroscopy(XPS) and secondary ion mass spectrometry(SIMS) techniques. Angle-resolved XPS analysis was carried out as non-destructive depth profile one for investigating the chemical bonding states of silicion, carbon, oxygen and fluorine. The residue layer consists of C-F polymer. O-F bond was found on the top of the polymer layer and Si-O, Si-C and Si-F bonds were detected between Si substrate and polymer film. A 60nm thick damaged layer of silicon surface mainly contains carbon and fluorine.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.145-152
• /
• 1992

Si surfaces exposed to CHF3/C2F6 gas plasmas ih reactive ion etching (RIE) have been characterized by X-ray photoelectron spectroscopy (XPS). CHF3/C2F6 gas plasma exposure of Si surface leads to the deposition of residual film containing carbon and fluorine. The narrow scan spectra of C 1s show various bonding states of carbon as C-Si, C-F/H, C-CFx(x $\leq$ 3), C-F, C-F2, and C-F3. The chemical bonding states of fluorine are described with F-Si, F-C and F-O. And the oxygen and silicon are also detected. The effects of parameters for reactive ion etching as CHF3/C2F6 gas ratio, RF power, and pressure are investigated.