• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.267-276
• /
• 2007

This study was conducted to determine the effect of cryoprotectants (sugar, sorbitol, polyphosphate) on the physico-chemical characteristics of chicken breast surimi manufactured by pH adjustment (pH 11.0) during freezing storage. The final surimi was divided into experimental units to which the following treatments were randomly assigned: C (Alaska pollack surimi: two washings, 4% sugar +5% sorbitol ${\pounds}'$ 0.3% polyphosphate additive): T1 (chicken breast surimi: pH 11.0 adjusted, 0.3% polyphosphate additive): T2 (chicken breast surimi pH 11.0 adjusted, 5% sorbitol +0.3% polyphosphate additive); T3 (chicken breast surimi: pH 11.0 adjusted, 4% sugar +5% sorbitol +0.3% polyphosphate additive). The crude protein content of the control was higher than all treated samples, however the moisture, crude fat and crude ash of T3 were higher than the control (p<0.05). The pH, WHC and collagen content of the control were higher than all of the treated samples, and these values decreased with storage time for all treatments and the control (p<0.05). The cholesterol content of the control was lower than all treated samples, but the myofibrillar protein contents of all treated samples were higher than the control (p<0.05). The cooking loss of T2 was lower than the control and the other two treatments (p<0.05). The $L^*,\;a^*\;and\;b^*$ values of all treated samples were higher than those of the control during freezing storage (p<0.05). The W value of T3 at 1.5 and 3 months of freezing storage was higher than the control and T1 (p<0.05). The myoglobin and met-Mb contents of the control were similar to all treated samples, and the met-Mb content of the control and all treated samples increased with storage time (p<0.05). Immediately after freezing, the hardness of the control was higher than all treated samples, however it was lower after 1.5 and 3 months of frozen storage (p<0.05). The cohesiveness and gumminess of the control were higher than all treated samples immediately after freezing, however the values for T3 were higher than those of the control and the other two treatments during frozen storage for 1.5 and 3 months (p<0.05).

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.259-267
• /
• 1994

The effect of processing parameters, temperature, gas concentration, gas flow rate and pressure, were studied on the densification of carbon/carbon composites using a Robust design method in isothermal low-pressure chemical vapor infiltration with a gas system of $C_3H_8-N_2$ After one time of isothermal low-pressure chemical vapor infiltrat.ion, the bulk density of carbon/carbon composites in creased up to 1-9% and apparent porosity of the composites decreased down to 20-50%. ANOVA analysis of the experiment.al data revealed that the important parameters of isothermal lowpressure chemical vapor infiltration were temperature, gas concentration and gas flnw rate. 'There was almost no ~ f f e c t on densification by pressure and interaction between each parameters. In t, he present experimental conditions, the highest bulk density was obtained at $1100^{\circ}C$ temperature, 100% $C_3H_8$, concentration, 100 SCCM flow rate and 5 torr pressure.

• Journal of agricultural medicine and community health
• /
• v.11 no.1
• /
• pp.3-11
• /
• 1986

In order to observe the infestation rate and intensity of C. sinensis in Yeoju Eup, Kyung-gi Do, 9,512 stool specimens were collected from the inhabitants through student's helps. The specimens were examined by cellophane thick smear technique and Stoll's egg dilution technique. The epidemiological status was analysed statistically by the regession equation and catalytic curve with the results obtained from this area. The results are as follows: 1) Collection rate oft he stool samples was 66.5%, 9.512 out of 14,300 inhabintants complied with our survey. 2) The infestation rate of C.sinensis was 5.0%, and for male 7.8%, for female 2.3%. 3) Average E.P.G. by Stoll's egg dilution technique in this area was 1,572, and for male 1,853, for female 676. 4) The degree of the intensity of C. sinensis infection by E.P.G. count was distributed as 65.2% in light infection, 32.0 % in moderate infection, 2.8% in heavy infection and none in very heavy infection. 5) The intensity of endemicity in this area was represented with the regression equation calculated with cumulative percentages of E.P.G. counts. Regression equation was y=3.887+1.695 log x and Cs. $D_{50}$ was 4.54. 6) The two-stage catalytic model was applied and the calculation lead to the equation $y=0.267(e^{-0.004t}-e^{-0.019t})$; a=0.004 < b=0.019. 7) Other helminthic infection rate in this area was 1.4% in A.lumbricoides 2.7% in T. trichiura, 1.6% in M. yokogawai md 0.2% in Taenia sp. respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.264-267
• /
• 2003

Pitch measurements of 150 nm pitch one-dimensional grating standards were carried out using an contact mode atomic force microscopy(C-AFM) with a high resolution three-axis laser interferometer. It was called as 'Nano-metrological AFM' In Nano-metrological AFM, Three laser interferometers were aligned well to the end of AFM tip. Laser sources of the three-axis laser interferometer in the nano-metrological AFM were calibrated with an I$_2$-stablilzed He-Ne laser at a wavelength of 633 nm. So, the Abbe error was minimized and the result of the pitch measurement using the nano-metrological AFM has a traceability to the length standard directly. The uncertainty in the pitch measurement was estimated in accordance with the Guide to the Expression of Uncertainty in Measurement(GUM). The Primary source of uncertainty in the pitch-measurements was derived from repeatability of pitch-measurement, and its value was approx 0.186 nm. Expanded uncertainty(k=2) of less than 5.23 nm was obtained. It is suggested that the metrological AFM is a useful tool for the nano-metrological standard calibration.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.267-269
• /
• 2009

In this paper, insulations characteristics by temperature changes($+10{\sim}-60[^{\circ}C]$) of $SF_6$ 9as in the experimental chamber were studied. From this result, The breakdown characteristics classify the gas & liquid coexisted stage of voltage value increases & much deviation and the $V_B$ low stage as the interior of chamber gets filled with mixture of $SF_6$ that are not liquefacted and remaining air which couldn't be ventilated. In addition the ability of insulation of liquid $SF_6$ was higher than that of the highly pressurized $SF_6$ gas. In this research, we want to provide the base data on designing insulation of high-temperature superconductor and the cryogenic equipments by investigating the insulation characteristics of $SF_6$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.267-270
• /
• 2004

A silver indium sulfide($AgInS_2$) epilayer was grown by the hot wall epitaxy method, which has not been reported in the literature. The grown $AgInS_2$ epilayer has found to be a chalcopyrite structure and evaluated to be high qualify crystal. From the photocurrent measurement in the temperature range from 30 K to 300 K, the two peaks of A and B were only observed, whereas the three peaks of A, B, and C were seen in the PC spectrum of 10 K. These peaks. are ascribed to the band-to-band transition. The valence band splitting of $AgInS_2$ was investigated by means of the photocurrent measurement. The crystal field splitting, $\ddot{A}cr$, and the spin orbit splitting, $\ddot{A}so$, have been obtained to be 0.150 eV and 0.009 eV at 10 K, respectively. And, the energy band gap at room temperature has been determined to be 1.868 eV. Also, the temperature dependence of the energy band gap, $E_g(T)$, was determined.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.267-270
• /
• 2002

This study was carried out to establish storage methods and to keep high quality of the raw and boiled vegetable peanut. After boiling at 100$^{\circ}C$ for 20min at 7% saline water far 40min the pods were packaged with 80 $\mu\textrm{m}$ Ny/LDPE film in vacuum, 80$\mu\textrm{m}$ LDPE film and Gauge-bag, and stored at room temperature and 4$^{\circ}C$. The moisture content of pods in room temperature were decreased than pods at 4$^{\circ}C$. After 21days storaging with Gauge-bag, texture of pods were toughen because moisture content of pods reduced severely. Colour of raw pods in packaging 80 $\mu\textrm{m}$ Ny/LDPE film vacuum was severely browning but boiled pods was browning little after opening a seal. After 2days storage at room temperature and 21days storage at 4t, pods were deteriorated. The hardness was much lower in boiled kernels than raw kernels and decreased when the storage period elapsed.

• Nutritional Sciences
• /
• v.9 no.4
• /
• pp.267-272
• /
• 2006

The effect of methanol extract from Agaricus blazei Murill on the hepatotoxicity was investigated $CCl_4$ is one of the oldest and most widely used toxins for the induction of hepatic damages and fibrosis in experimental animals. In this study, male Sprague-Dawley(SD) rats were randomly divided into 6 groups of the control(C), $CCl_4(T),\;CCl_4$ and high fat group(TL) with matching sub-groups of Agaricus blazei Murill extract-fed groups of CA, TA and TLA. Methanol extracts of Agaricus blazei Murill were fed 50 mg/kg B.W daily via drinking water. A 1.2 mL of $CCl_4/kg$ body weight was administered by oral intubation twice a week for total of six times. The levels of total-cholesterol, TG, LDL and LDL-phospholipids were elevated by $CCl_4$ treatment as compared to the control(C). However, Agaricus blazei Murill methanol extract feeding in the group of TA and TLA significantly(p<0.05) decreased TG by 53.1 % and 17.9% compared to the internal control of T and TL, respectively. Triglyceride of TL was increased by 3.33 times(p<0.05) compared to the control(C) with $CCl_4$ and high fat administration from 3.78 mg/g to 12.60 mg/g liver. The extract(CA) also reduced kidney weight compared to the control(C). With the administration of high fat and $CCl_4$(TLA), the extract reduced the organ weight of both liver and kidney and further, significantly reduced TG, total cholesterol and GTP activity. Hepatoprotective effects of Agaricus blazei Murill on GOT, GPT, AP and LDH activities were enhanced by the extract feeding. Electronmicrograph showed that $CCl_4$ deteriorated the structure of cytoplasmic matrix with its uneven distribution. However, the extract reconstituted the damaged cytoplasm and stimulated mitochondriogenesis. The above results suggest that Agaricus blazei Murill may have a possible protective effect against chemically induced liver damage and further help to reduce the symptoms of fatty liver.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.259-267
• /
• 1989

In this paper, the fabric specimen undergoes repeated laundering under given condition. After this cyclic laundering was applied, the crease recoveries of the specimen were measured using shirley crease revovery tester in order to evaluate the effect of factors at given condition during crease deformation. 5 samples of grey plain cloth were desized, alkali-scoured, bleached, whased with water, and air-dried. All tests were made on samples preconditioned to $65\%\;RH\;and\;20^{\circ}C$. The experimental results were analysed statistically to relate crease recoveries and the properties of smaples, recovery periods (time) of crease. Furthermore, the crease recoveries of core-spun yarn woven fabrics were discussed in comparison with those values for $100\%$ combed cotton yarn woven fabric and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric. The results obtained are as follows; 1. Regardless of materials, remarkable decrease are observed in crease recoveries about 1-5 cycles of the repeated laundering, but slack decrease are observed in crease recoveries after 5 cycle of the re-peated laundering. 2. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to recovery periods (t) of crease as follows; log$\alpha$=0.01415 log t+2.1168 ($r^2=0.94$) 3. Core-spun yarn woven fabrics were superior to $100\%$ combed cotton yarn woven fabrics and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric in crease recoveries. 4. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to cover factor (CF), thickness (T) at pressure 0.5 $gf/cm^2$, weight (W) as follows; log$\alpha$=-0.3482 log CF-0.4924 log T-0.4727 W+2.4243 ($r^2=0.88$) 5. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to 2HB/B, 2HB/W, $\sqrt[3]{B/W}$, WC/T which are concerning to formation of weared clothes and bending Iran formation behavior as follows: log $\alpha$=0.0091 2HB/B+0.4667 2HB/W+0.0185 $\sqrt[3]{B/W}$+0.0114 WC/T+1.8433 ($r^2=0.86$)

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.258-267
• /
• 2021

PURPOSE. The purpose of this study was to compare the surface roughness, phase transformation, and surface topography of dental zirconia with three different yttrium oxide compositions under same grinding and polishing conditions. MATERIALS AND METHODS. Three zirconia disks (IPS e.max ZirCAD LT, MT, MT multi, Ivoclar Vivadent AG, Schaan, Liechtenstein) were selected for experimental materials. Sixty-nine bar-shaped specimens were fabricated as 12.0 × 6.0 × 4.0 mm using a milling machine and glazing was conducted on 12.0 × 6.0 mm surface by same operator. With a custom polishing device, 12.0 × 6.0 mm surfaces were polished under same condition. Surface roughness (Ra[㎛]) was measured before grinding (C), after grinding (G), and at every 3 steps of polishing (P1, P2, P3). X-ray diffraction and FE-SEM observation was conducted before grinding, after grinding, and after fine polishing (P3). Statistical analysis of surface roughness was performed using Kruskal-Wallis test and Mann-Whitney-U test was used as a post hoc test (α = .05). RESULTS. There were no significant differences of surface roughness between LT, MT, and MM groups. In LT, MT, and MM groups, P3 groups showed significantly lower surface roughness than C groups. X-ray diffraction showed grinding and polishing didn't lead to phase transformation on zirconia surface. In FE-SEM images, growths in grain size of zirconia were observed as yttrium oxide composition increases. CONCLUSION. Polished zirconia surface showed clinically acceptable surface roughness, but difference in yttrium oxide composition had no significant influence on the surface roughness. Therefore, in clinical situation, zirconia polishing burs could be used regardless of yttrium oxide composition.