• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.10
• /
• pp.1-7
• /
• 1997

This paper proposes a new real-time 2-D convolver filter architecture wihtout using any multiplier. To meet the massive amount of computations for real-time image processing, several commercial 2-D convolver chips have many multipliers occupying large VLSI area. Te proposed architecture using only one shift-and-accumulator can reduce the chip size by more than 70% of commercial 2-D convolver filter chips and can meet the real-time image processing srequirement, i.e., the standard of CCIR601. In addition, the proposed chip can be used for not only 2-D image processing but also 1-D signal processing and has bood scalability for higher speed applications. We have simulated the architecture by using VHDL models and have performed logic synthesis. We used the samsung SOG cell library (KG60K) and verified completely function and timing simulations. The implemented filter chip consists of only 3,893 gates, operates at 125 MHz and can meet the real-time image processing requirement, that is, 720*480 pixels per frame and 30 frames per second (10.4 mpixels/second).

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.57-64
• /
• 1998

This paper presents an architecture of a real-time two-dimensional median filter. The architecture has appropriate characteristics for the VLSI implementation such as small memory requirements, regular computations, and local data transfers. For the efficient two-dimensional median filter, a separable two-dimensional median filtering structure and a bit-sliced pipelined median searching algorithm are used. A behavioral simulator is implemented with C language and used for the analysis of the presented architecture.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.6
• /
• pp.282-282
• /
• 2023

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.2
• /
• pp.151-161
• /
• 2012

The present study numerically investigates the aerodynamic characteristics of two-dimensional wings in the vicinity of the ground by solving two-dimensional steady incompressible Navier-Stokes equations with the turbulence closure model of the realizable k-${\varepsilon}$ model. Numerical simulations are performed at a wide range of the normalized ground clearance by the chord length ($0.1{\leq}h/C{\leq}1.25$) for the angles of attack ($0^{\circ}{\leq}{\alpha}{\leq}10^{\circ}$) in the prestall regime at a Reynolds number (Re) of $2{\times}10^6$ based on free stream velocity $U_{\infty}$ and the chord length. As the physical model of this study, a cambered airfoil of NACA 4406 has been selected by a performance test for various airfoils. The maximum lift-to-drag ratio is achieved at ${\alpha}=4^{\circ}$ and h / C = 0.1. Under the conditions of ${\alpha}=4^{\circ}$ and h / C = 0.1, the effect of the Reynolds number on the aerodynamic characteristics of NACA 4406 is investigated in the range of $2{\times}10^5{\leq}Re{\leq}2{\times}10^9$. As Re increases, $C_l$ and $C_d$ augments and decreases, respectively, and the lift-to-drag ratio increases linearly.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.183-193
• /
• 2012

Compressive property of high strength concrete with amorphous metal fibers subject to high temperature has been investigated. The measure of this investigation includes explosive spalling, weight loss, residual compressive strength, strain at peak stress, elastic modulus, and residual energy absorption capacity after exposure to $400^{\circ}C$, $600^{\circ}C$and $800^{\circ}C$. In addition to the amorphous metal fiber, two other types of fibers (polypropylene fiber and hooked-end steel fiber) were also included in this investigation for comparison. The experimental program was conducted with high strength concrete using several combinations of the fiber types. The testing result shows that the concrete with amorphous metal fibers plus polypropylene fibers shows a superior behavior than those using other combination or single fiber type ingredient.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.127-134
• /
• 2012

This study was carried out to suggest an experimental base in selecting the cold tolerance of plants. The cold tolerance of the plants were subject to laboratory low temperature treatments and cold processing time were evaluated using both electrolyte leakage and regrowth test. The Logistic model of nonlinear regression analysis was used to evaluate the lethal temperatures that were predicted with the range of $-16.1{\sim}-24.4^{\circ}C$. The order of low-temperature resistance was Sedum reflexum > S. spurium > Ophiopogon japonicus > S. album > S. takevimense > Dianthus chinensis. At the lowest temperature of $13.4^{\circ}C$ the electrolyte leakage value of the plants were lower than 50% demonstrating that they could be applied stably to the roof installed in Korea during the winter with the lowest temperature of $-13.5^{\circ}C$.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.11-19
• /
• 2013

The Korean naval weapon systems, combat experiments establish the concept of Battle operations, and create the future of the new weapons system. Doctrine development and training as well as ranging from experiments for evaluate the performance of mission operations for combat experiments are used. The battle lab is effectively support tool for the Korean Naval battle experiments. The battle lab is through a dedicated testing facility and to build efficient and effective simulation-based acquisition supporting environment. In this paper, the ship / submarines C2 operations virtual simulator was developed to support the concept of Battle operations of naval combat experiments in training and tactical development. The ship C2 operations virtual simulator makes the anti-ship and anti-aircraft the engagement scenario for performed experiments using the SADM. The submarines C2 operations virtual simulator makes the anti-submarine engagement scenario for performed experiments using EAS. EAS System was created before reuse. EAS system by modifying the additional interfaces HLA-RTI has been reused. Reflected in the tactics and training after analysis of the results through the battle experiment. Also increase training fidelity through operator involvement. The anti-ship and anti-aircraft system architecture (SADM) and anti-submarine system architecture (EAS) requires unique design of system framework since two separate architectures should be integrated into a system. An C2 virtual linked architecture was used to integrate different system architecture. A C2 virtual linked software framework, designed that have integrated protocol for battle experimental linkage and battlefield visualization environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.795-805
• /
• 2012

This paper proposes an algorithm and a hardware architecture for a broadcast communication which has the worst bottleneck among multiprocessor using distributed memory architectures. In conventional system, The pipelined broadcast algorithm is an algorithm which takes advantage of maximum bandwidth of communication bus. But unnecessary synchronization process are repeated, because the pipelined broadcast sends the data divided into many parts. In this paper, the MPI unit for pipeline chain algorithm based on circuit switching removing the redundancy of synchronization process was designed, the proposed architecture was evaluated by modeling it with systemC. Consequently, the performance of the proposed architecture was highly improved for broadcast communication up to 3.3 times that of systems using conventional pipelined broadcast algorithm, it can almost take advantage of the maximum bandwidth of transmission bus. Then, it was implemented with VerilogHDL, synthesized with TSMC 0.18um library and implemented into a chip. The area of synthesis results occupied 4,700 gates(2 input NAND gate) and utilization of total area is 2.4%. The proposed architecture achieves improvement in total performance of MPSoC occupying relatively small area.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.150-160
• /
• 1997

The tendency of the Minimalism in the contemporary a architecture is based on Mies van der Rohe s saying ‘나SS IS m more" as the principle of the Minimal art and its formative c composition. It can be divided into technical Minimalism p prevailed in Northern Europe and the zone of German l language, and the regional one in Southern Europe and S Southern America. The former is interested in the experiences of the techniques and materials, and the latter in that of the s space and the place through the simple forms. The minialistic approach to the architecture is nat only m methodological one. It accepts the concept and the construction of architecture as 2 axes for making it keeps the tradition and c communication with the master builder, the materials, and i염 m means to compound. The expressive characteristics of works in M Minimalism are 1) as the formal issue, it is simple, self-referring. without any symbol or any allusion, and compounds the r repetitive forms as the comceptual aspec않 of architecture, 2) it h has the characteristies such as the approach directly to the m means by which architecture made, the critical interests to the m material attributes, and the capacity to the contemporary t technology as the issue of technique and materials, 3) regarding t the space and the place, it shows the good sense to the site in t the sphere intervention of architecture 1e Maininlalism architecture has i않 impotance in the point t that it seeks to the qualities immanent in architecture by s showing the marvelous status through discovering the i immanent properties of the site, program materials, and the s structure, and also it begins new way of interpreting a architecture with new viewpoint to the its essence as well as a architecture itself.self.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.6
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).