• Structural Engineering and Mechanics
• /
• 제14권4호
• /
• pp.455-472
• /
• 2002

The paper involves the study on the elastic and elasto-plastic stress wave propagation in the 1-D and 2-D solid media. The Smooth Particle Hydrodynamics equations governing the elastic and elasto-plastic large deformation dynamic response of solid structures are presented. The proposed additional stress points are introduced in the formulation to mitigate the tensile instability inherent in the SPH approach. Both incremental rate approach and leap-frog algorithm for time integration are introduced and the new solution algorithm is developed and implemented. Two examples on stress wave propagation in aluminium bar and 2-D elasto-plastic steel plate are included. Results from the proposed SPH approach are compared with available analytical values and finite element solutions. The comparison illustrates that the stress wave propagation problems can be effectively solved by the proposed SPH method. The study shows that the SPH simulation is a reliable and robust tool and can be used with confidence to treat transient dynamics such as linear and non-linear transient stress wave propagation problems.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.362-369
• /
• 2001

The electrical properties of varistors consisting of Zn-Pr-Co-Cr-Er oxides were investigated in the Er$_2$O$_3$content range of 0.0 to 2.0 mol%. the varistors without Er$_2$O$_3$ exhibited a relatively low nonlinearity, which was 14.24 in the nonlinear exponent and 21.47 $\mu$A in the leakage current. However, the varistors with Er$_2$O$_3$ sintered at 1335$^{\circ}C$ for 1h exhibited very high nonlinear exponent of 70, in particular, reaching a maximum value of 78.05 in 2.0 mol% Er$_2$O$_3$, and those sintered at 1335$^{\circ}C$ for 2h exhibited the nonlinear exponent close to 50, in particular, reaching a maximum value of52.76 in 0.5 mol% Er$_2$O$_3$. The others except for 0.5 mol% Er$_2$O$_3$-added varistors exhibited very high instability resulting in a thermal runaway within a short time, even a weak DC stress. Increasing soaking time decreased the nonlinearity, but increased the stability. The varistors containing 0.5mol% Er$_2$O$_3$ sintered for 2h exhibited excellent stability, in which the variation rate of the varistor voltage and nonlinear exponent was -1.70% and -7.15%, respectively, under more severe DC stress such as (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$/115$^{\circ}C$/12h)+(0.90 V$_{1mA}$/12$0^{\circ}C$/12h)+(0.95 V$_{1mA}$/1$25^{\circ}C$/12h)+(0.95 V$_{1mA}$/15$0^{\circ}C$/12h).TEX>/12h).

• 한국운동역학회지
• /
• 제29권1호
• /
• pp.33-41
• /
• 2019

Objective: This study aimed to investigate the effect of diminished plantar sensation in Y-balance test between chronic ankle instability (CAI) patients versus Healthy individuals. Method: A total of 90 subjects and CAI group (N=45) (age: $24.49{\pm}2.52yrs$, height: $173.53{\pm}8.20cm$, weight: $69.62{\pm}12.92kg$) and healthy group (N=45) (age: $24.85{\pm}2.70yrs$, height: $170.27{\pm}7.70cm$, weight: $66.04{\pm}11.60kg$) participated in this study. Participants were tested on the anterior (ANT), posterolateral (PL), and posteromedial (PM) reach directions of the Y-Balance Test before and after a 10-minute of plantar cutaneous sensation application using ice ($2^{\circ}C$). Normalized reach distances were measured 3 times each direction. Results: We observed a decrease in reach-distance scores for the reach directions after diminished plantar cutaneous sensation in all reach directions (p<.01). Also, we observed a decrease in reach-distance scores for the PL, and PM reach directions between groups (p<.05). Conclusion: Our results indicated that dynamic postural control was adversely affected immediately after diminished plantar cutaneous sensation between CAI group and healthy group. Future research may suggest that determine the studies involving more realistic dynamic movement, such as walking or running, landing.

• 한국임상수의학회지
• /
• 제26권5호
• /
• pp.490-494
• /
• 2009

A 2-year-old Maltese and a 5-month-old Yorkshire terrier were presented with ataxia. Tetraparesis was observed in a 9-year -old Yorkshire terrier. The localizations of the lesions suggested brain or cervical spinal cord by the neurological examination, and the following images was achieved: radiography, axial images of computed tomography (CT), reconstruction image of CT such as multi-planar reformation(MPR) and 3-dimensional(3D) reconstruction and magnetic resonance imaging (MRI). On radiography, the misalignment between atlas (C1) and axis (C2), absent dens of axis, and increased space between the dorsal arch of C1 and spinous process of C2 were found. The discontinuation between dens and body of C2 was identified through axial CT images, and the fragmentation of dens separated from axis was observed through MPR and 3D image in all case. The hyperintense lesions and the spinal cord compression on T2-weighted MR images were represented in a dog with tetraparesis, the others represented only spinal cord compression. Three dogs were diagnosed as atlantoaxial instability (AAI) by dens fracture of C2. The dog with tetraparesis was euthanized due to guarded prognosis. The others were recovered completely. It is difficult to differentiate dens fracture of C2 from abnormal dens such as agenesis and hypoplasia. We thought that CT is very useful to evaluate the dens of C2 and differentiate the causes of AAI, and the reconstruction images of CT such as MPR and 3D make the translation of the fragmented dens or axis of AAI more precisely evaluate.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권5호
• /
• pp.309-312
• /
• 2003

The transformation capacity (T$\_$c/) of Methylosinus trichosporium OB3b in the degradation of ethylene chlorides was determined by measuring the decrease of soluble methane monooxygenase (sMMO) activity of resting cells in batch experiments. All measurements of sMMO activity were taken in the presence of 20 mM formate to avoid the deficiency of reducing power, and within 2 hrs to avoid the effect of natural inactivation from instability of the resting cells. The constant T$\_$c/ values of 0.58 ${\pm}$ 0.132 and 0.80 ${\pm}$ 0.17 ${\mu}$mol/mg cell were obtained for trichloroethylene (TCE) and 1,2-dichloroethylene (cis and trans-1,2-DCE), respectively, regardless of their concentrations. The transformation capacity measured by this method can be used to predict the amount of cells that should be stimulated in in-situ bioremediation.

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.457-468
• /
• 1993

In oxide matrix-SiC(W) composites, instability and glassy phase formation due to oxidation at the high temperature and the diffusion of Si, respectively, cause brittle fracture and low reliability for ceramic materials. The mode of contribution in each mechanisms induced by matrix-whisker debonding, varies with the morphology of matrix-whisker interfaces. This work has described the dispersion behaviours and stabilization mechanisms in slip systems, and multiple toughening mechanisms by dint of two second phase different from each other when spherical ZrO2 and chemically stable Al2O3(W) is respectively added in Al2O3 matrix. To obtain complexshaped components, slip casted bodies were sintered at 1$600^{\circ}C$, 2hrs up to 98~99% R.D.. Multiple toughening mechanisms in comparison with theories reported until now will be discussed as a result of the phase analysis of ZrO2 by athermal behaviours and microstructural characterizations as well as measured mechanical properties.

• Bulletin of the Korean Chemical Society
• /
• 제16권10호
• /
• pp.929-933
• /
• 1995

The electronic band structure and electrical properties of KMo4O6 containing chains of condensed molybdenum octahedra are analyzed by means of the extended Hu&ckel tight-binding method. KMo4O6 has partially filled bands of 1D as well as 3D character. They also exhibit the anisotropic band dispersions with bandwidths much larger along the c* axis than along the directions perpendicular to it. Thus, conduction electrons are essentially delocalized along the c* direction (i.e., the chain of condensed molybdenum octahedra) in the solid. The 1D band of two partially filled d-block bands leads to Fermi surface nesting with the wave vector q=0.3c*. The CDW instability due to this nesting is expected to cause the phase transition associated with the resistivity anomaly at low temperature. The characteristics of metallic behavior in the crystallographic ab plane are explained on the basis of the unnested 2D Fermi surfaces.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.39-44
• /
• 2001

The thermocapillary flow in a differentially heated cylindrical liquid bridge under steady rotation of the hot disk is considered in the limit of zero capillary number. Steady flow states and their three-dimensional stability are calculated numerically. A linear stability analysis reveals that the most dangerous perturbations are oscillatory with azimuthal wavenumber m=1 or m=2 depending on the parameters.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.489-495
• /
• 1998

최근 울진 1,2호기의 급정지 제어봉 E.C.T(Eddy Current Test) 결과 Fretting Wear가 심한 것이 관찰되었다. 이는 유동유발 진동에 의해 제어봉과 그 지지물 간의 접촉으로 인한 손상이 주요인으로 추정되고 있다. 제어봉 손상은 제어봉 교체로 인한 비용뿐만 아니라 마모금속의 방사화로 인한 냉각재의 오염을 수반한다. 따라서 본 연구는 원자로의 유동유발진동을 선별하여 파손 위치 및 형태, 유동조건, 제어봉과 안내관의 기하학적 구조 등을 분석한 결과 지배적인 손상원인을 Turbulence Excitation과 Fluidelastic Instability로 선정하였다. 특히 안내관내의 6번째 card 위치에서 발생하는 높은 마모현상이 난류도 증가에 의한 손상임을 제시하였다

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.1-8
• /
• 2004

Applications of the deep hole drilling process can be found in many industries ranging from large aerospace manufacturer to small tool and die shop. Deep hole drilling process with small diameter generally requires high quality and accuracy. But problems which may arise or result from the deep hole drilling process include drill breakage, the generation of a finished part surface which does not satisfy required quality, and process instability. To guaranty the required machining quality and accuracy, it is important to understand and improve the deep hole drilling process. In this study, deep hole drilling experiments using tingle edge drill with small diameter under 2mm have been carried out for difficult to cut materials such as C42CrMo4 and C45pb and the experimental results were analyzed. Feed force and torque versus feed showed linear relationship in both materials. The feed force and torque are decreased as cutting speed is increased but the trends are not uniform in C42CrMo4.