• Journal of Korean Neurosurgical Society
• /
• 제64권6호
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.193-201
• /
• 2007

Since the margins for the minimum quench energy and for the operating current in the superconducting magnet determine the operating regime of the magnet, a thermal stability analysis for the KSTAR superconducting magnet system is performed using 1-D Gandalf code. The result shows that the minimum quench energy is about 500 mJ/cc and the operating current margin is about 70 %. These values are larger than those of the KSTAR design criteria and the KSTAR superconducting magnet system can be operated stably under various experimental environments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.179-179
• /
• 2008

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 산화물 반도체 세라믹이다. 이러한 성질을 이용하여 degaussing 소자, 정온 발열체, 온도센서, 전류 제한소자 등 상업적으로 여러 분야에서 연구되고 있다. 또한 원가절감 등을 위하여 Ni 내부전극을 사용하여 환원 분위기에서 소결하는 칩 타입에 대한 연구가 진행되고 있다. 본 연구에서는 Sm 함량(0.1at%~1.0at%)을 달리한 $BaTiO_3$(Si, Mn, Ca) 계를 선택하여 3%$H_2/N_2$ 분위기에서 1200~$1260^{\circ}C$, 2h 소결한 후 공기 중에서 재산화 처리하고 재산화 시간에 따른 PTC 특성 변화에 대하여 고찰하였다. 재산화 온도와 시간은 각각 $800^{\circ}C$와 0.5h~10h으로 하였다. Sm 함량을 달리하여 환원 분위기에서 소결한 시편의 미세구조와 PTC 특성과의 상관관계를 관찰한 결과, 소결온도가 낮을수록 PTC 특성은 좋아졌으며, 상온 비저항은 Sm 함량이 높아질수록 낮아졌다. 또한 Sm 함량이 높아질수록 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 낮아졌다. 재산화 시간에 따른 PTC 특성은 다소 떨어졌지만 소결온도에 따라 달리 나타났다. Jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Sm을 0.7 at% 첨가한 계에서 재산화를 1시간 처리한 시편에서 가장 우수하였다.

• Biomedical Science Letters
• /
• 제2권2호
• /
• pp.231-240
• /
• 1996

Human blood clotting (coagulation) factor 9 cDNA which codes for 461 amino acid has been cloned by screening human fetal liver cDNA library using PCR. This 1.4 kb cDNA spanning from the ATG initiation codon to the TAA termination codon was cloned into bacterial .expression vector pGEX-2T, generating pGEX-F9 plasmid. The plasmid pGEX-F9 expresses about 73 kDa GST (Glutathione S-transferase)-Factor 9 fusion protein when introduced into E. coli. Western blot analysis using polyclonal antibody raised against human factor 9 confirmed this fusion protein contains factor 9 protein. The level of GST-factor 9 expression was about 20% of total protein and the purification of fusion protein was efficiently achieved by using GST agarose bead based on one step purification protocol.

• Mycobiology
• /
• 제34권2호
• /
• pp.73-78
• /
• 2006

Inter-specific hybridization between Pleurotus pulmonarius and P. florida was attempted through PEG-induced protoplast fusion to select a fusant. The protocol for protoplast release, regeneration and fusion in these two Pleurotus species was standardized using the variables controlling the process. The mixture of mycolytic enzymes, i.e. commercial cellulase, crude chitinase and pectinase, KCl (0.6 M) as osmotic stabilizer, pH 6 of the phosphate buffer and an incubation time of 3 hours resulted in the maximum release of protoplasts from 3-day-old mycelia of P. florida ($5.3{\sim}5.75{\times}10^{7}$ protoplasts/g) and P. pulmonarius ($5.6{\sim}6{\times}10^{7}$ protoplasts/g). The isolated protoplasts of P. florida regenerated mycelium with 3.3% regeneration efficiency while P. pulmonarius showed 4.1% efficiency of regeneration. Polyethyleneglycol (PEG)-induced fusion of protoplasts of these two species resulted in 0.28% fusion frequency. The fusant produced fruiting bodies on paddy straw but required a lower temperature of crop running ($24{\pm}2^{\circ}C$) than its parents which could fruit at $28{\pm}2^{\circ}C$. The stable fusant strain was selected by testing for the selected biochemical markers i.e. Carbendazim tolerance and utilization of the lignin degradation product, vanillin.

• Korean Journal of Animal Reproduction
• /
• 제26권1호
• /
• pp.33-39
• /
• 2002

This study was conducted to investigate the effect of $Ca^{2+}$ concentration in fusion medium on the fusion, nuclear morphology and the development of bovine somatic cell nuclear transfer embryos. Bovine skin cells were transferred into an enucleated oocyte and fused with cytoplasm in the fusion medium containing with 0.05 to 1.0 mM Cacl$_2$. Nuclear transfer embryos were activated with a combination of A23187 and cycloheximide. Nuclear transfer embryos were fixed at 3 h after fusion or cultured for 7 ~8 days. Fusion rate was significantly (P＜0.01) increased by increasing the $Ca^{2+}$ concentrations in the fusion medium from 0.05 mM (56.6%) to 0.5 mM (50.1%) and 1.0 mM (84.3%). More than 80% of reconstituted embryos underwent premature chromosome condensation (PCC) with 0.05, 0.1 mM CaCl$_2$, whereas 54.5% and 59.3% of embryos formed pronucleus (PN) directly without PCC in the 0.5 and 1.0 mM CaCl$_2$, groups. Blastocyst formation rates were significantly (P＜0.05) different between 0.1 mM and 1.0 mM CaCl$_2$groups. From the present result, it is suggested that the elevated $Ca^{2+}$ concentrations in fusion medium can enhance the fusion and blastocyst formation rates of bovine nuclear transfer embryos.bryos.

• Korean Journal of Microbiology
• /
• 제26권3호
• /
• pp.188-196
• /
• 1988

Intergeneric or intraspecific protoplast fusion between Saccharomyces cerevisiae X-2180-1A, Candida pseudotropicalis ATCC 8619 and CBS 607 was attempted to produce ethanol from lactose containing materials. Teh intergeneric fusion frequency between Saccharomyces cerevisiae X-2180-1A (ade rho) and Candida pseudotropicalis CBS 607 (his met) was $1.0\times 10^{-5}$. These values exhibited approximately 2-3.5 fold increase when compared with fusion frequency obtained without the treatment of bovine serum albumin, myoinositol and ergosterol, suggesting that these compounds may improve intergeneric of intraspecific protoplast fusion. Nuclear fusion appears to occur in fusants between intergenera(S. cerevisiae+C. pseudotropicalis) and intraspecies (C. pseudotropicalis strains) as strongly suggested by DNA content, nuclear staining, comparison of survival rate to UV light and isolation of recombinants after mitotic segragation. It was also found that alcohol production from intraspecific hybrids was somewhat increased when compared with that from their parents.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.237-247
• /
• 2020

Objective : Fixation of the C1-2 segment is challenging because of the complex anatomy in the region and the need for a high degree of accuracy to avoid complications. Preoperative 3D-computed tomography (CT) scans can help reduce the risk of complications in the vertebral artery, spinal cord, and nerve roots. However, the patient may be susceptible to injury if the patient's anatomy does not match the preoperative CT scans. The intraoperative 3D image-based navigation systems have reduced complications in instrument-assisted techniques due to greater accuracy. This study aimed to compare the radiologic outcomes of C1-2 fusion surgery between intraoperative CT image-guided operation and fluoroscopy-guided operation. Methods : We retrospectively reviewed the radiologic images of 34 patients who underwent C1-2 fusion spine surgery from January 2009 to November 2018 at our hospital. We assessed 17 cases each of degenerative cervical disease and trauma in a study population of 18 males and 16 females. The mean age was 54.8 years. A total of 139 screws were used and the surgical procedures included 68 screws in the C1 lateral mass, 58 screws in C2 pedicle, nine screws in C2 lamina and C2 pars screws, four lateral mass screws in sub-axial level. Of the 34 patients, 19 patients underwent screw insertion using intraoperative mobile CT. Other patients underwent atlantoaxial fusion with a standard fluoroscopy-guided device. Results : A total of 139 screws were correctly positioned. We analyzed the positions of 135 screws except for the four screws that performed the lateral mass screws in C3 vertebra. Minor screw penetration was observed in seven cases (5.2%), and major pedicle screw penetration was observed in three cases (2.2%). In one case, the malposition of a C2 pedicle screw was confirmed, which was subsequently corrected. There were no complications regarding vertebral artery injury or onset of new neurologic deficits. The screw malposition rate was lower (5.3%) in patients who underwent intraoperative CT-based navigation than that for fluoroscopy-guided cases (10.2%). And we confirmed that the operation time can be significantly reduced by surgery using intraoperative O-arm device. Conclusion : Spinal navigation using intraoperative cone-beam CT scans is reliable for posterior fixation in unstable C1-2 pathologies and can be reduced the operative time.

• Preventive Nutrition and Food Science
• /
• 제17권3호
• /
• pp.184-191
• /
• 2012

The purpose of this study was to investigate the fatty acid profiles in 18 soybean cultivars grown in Korea. A total of eleven fatty acids were identified in the sample set, which was comprised of myristic (C14:0), palmitic (C16:0), palmitoleic (C16:1, ${\omega}7$), stearic (C18:0), oleic (C18:1, ${\omega}9$), linoleic (C18:2, ${\omega}6$), linolenic (C18:3, ${\omega}3$), arachidic (C20:0), gondoic (C20:1, ${\omega}9$), behenic (C22:0), and lignoceric (C24:0) acids by gas-liquid chromatography with flame ionization detector (GC-FID). Based on their color, yellow-, black-, brown-, and green-colored cultivars were denoted. Correlation coefficients (r) between the nine major fatty acids identified (two trace fatty acids, myristic and palmitoleic, were not included in the study) were generated and revealed an inverse association between oleic and linoleic acids (r=-0.94, p<0.05), while stearic acid was positively correlated to arachidic acid (r=0.72, p<0.05). Principal component analysis (PCA) of the fatty acid data yielded four significant principal components (PCs; i.e., eigenvalues>1), which together account for 81.49% of the total variance in the data set; with PC1 contributing 28.16% of the total. Eigen analysis of the correlation matrix loadings of the four significant PCs revealed that PC1 was mainly contributed to by oleic, linoleic, and gondoic acids, PC2 by stearic, linolenic and arachidic acids, PC3 by behenic and lignoceric acids, and PC4 by palmitic acid. The score plots generated between PC1-PC2 and PC3-PC4 segregated soybean cultivars based on fatty acid composition.

• Transactions of the Korean hydrogen and new energy society
• /
• 제26권5호
• /
• pp.402-408
• /
• 2015

In D-T fusion reaction, $D_2$ (duterium) and $T_2$(tritium) are used as fuel gas. The exhaust gas of nuclear fusion includes hydrogen isotopes $Q_2$ (Q means H, D or T), tritiated components ($CQ_4$ and $Q_2O$), CO, $CO_2$, etc. All of hydrogen isotopes should be recovered before released to the atmosphere. This study focused on the recovery of hydrogen isotopes from $CQ_4$ and $Q_2O$. Two kinds of experiments were conducted to investigate the catalytic reaction characteristics of SMR (Steam Methane Reforming) and WGS (Water Gas Shift) reactions using Pt catalyst. First test was performed to convert $CH_4$ into $H_2$ using 6% $CH_4$, 6% CO/Ar feed gas. In the other test, 100% CO gas was used to convert $H_2O$ into $H_2$ at various reaction conditions (reaction temperature, S/C ratio, GHSV). As a result of the first test, $CH_4$ and CO conversion were 41.6%, 57.8% respectively at $600^{\circ}C$, S/C ratio 3, GHSV $2000hr^{-1}$. And CO conversion was 72% at $400^{\circ}C$, S/C ratio 0.95, GHSV $333hr^{-1}$ in the second test.