• 제목/요약/키워드: C1-2 fusion

검색결과 544건 처리시간 0.033초

Chiral Mesoporous Silica for Asymmetric Metal-free Catalysis: Enhancement of Chirality thorough Confinement Space by Plug Effect

  • 정은영;임청래;박상언
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.199-199
    • /
    • 2011
  • The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

  • PDF

피브로인 H-chain 재조합 단백질 발현시스템을 이용한 청색형광단백질의 발현 (Expression of the blue fluorescent protein in fibroin H-chain of transgenic silkworm)

  • 김성완;윤은영;최광호;김성렬;박승원;강석우;구태원
    • 한국잠사곤충학회지
    • /
    • 제52권1호
    • /
    • pp.25-32
    • /
    • 2014
  • 본 연구의 목적은 누에형질전환 기술과 피브로인 재조합단백질 발현시스템을 이용하여 청색형광실크를 개발하는 것으로서, 본 실험에서는 피브로인 H-chain의 N-말단과 C-말단을 이용하여 피브로인 재조합단백질 발현 시스템을 제작하였고, 종결코돈이 없는 EBFP 유전자를 위의 발현 시스템에 클로닝하여 청색형광실크를 제작하였다. 누에형질전환체 선발을 위해서는 $3{\times}P3$ promoter와 DsRed2를 이용하여 선발하였고, 300개의 누에알에 microinjection하여 F1 세대에서 5 bloods의 형질전환체를 선발하였다. 선발된 누에형질전환체는 초기배 단계의 눈과 신경조직, 유충과 번데기 그리고 성충의 눈에서 DsRed2 형광단백질이 발현되는 것을 확인할 수 있었다. 또한 실크의 피브로인에서 EGFP 단백질이 발현되는 것을 확인하기 위해, F2 세대의 누에형질전환체 중에서 5령 3일 유충을 해부하여 견사선을 형광현미경으로 관찰하였고, 중부 견사선에서 청색형광단백질이 발현되는 것을 확인할 수 있었다. 또한 F2 세대의 고치와 저온에서 정련한 실크에서도 청색형광단백질의 발현을 확인할 수 있었고, Western blot 분석에서도 EBFP 재조합 단백질이 피브로인 H-chain과 융합된 형태로 존재하는 것이 확인되었다. 이상의 결과에서 청색형광실크를 생산하는 누에형질전환체가 성공적으로 제작되었음을 확인할 수 있었고 이러한 결과를 토대로 새로운 산업소재로서 실크를 활용할 수 있을 것으로 기대한다.

Ca$^2+$ 및 Protein Kinase C가 배양한 계배근원세포의 분화에 미치는 영향 (Effects of $Ca^2+$ and Protein Kinase C on the Chick Myoblast Differentiation)

  • 정기화;김세재;박정원;박영철;이정주
    • 한국동물학회지
    • /
    • 제32권1호
    • /
    • pp.40-47
    • /
    • 1989
  • 계배 근원세포의 배양 배지에 calcium ionophore A23187이나 EGTA를 배양 24시간에 첨가함으로서 초래된 세포내 칼슘 농도의 변화는 근원세포의 분화과정에 상당한 영향을 미쳤다. 배양 24시간에 A23187이나 EGTA를 첨가한 후 배양 48시간, 72시간, 및 96시간에 각각 세포를 [35S]methionine으로 1시간 표지시킨 후 수확하여 2차원 전기영동법으로 단백질을 분리시켰을 때, 일부 단백질은 배양 조건에 따라 합성 양상을 달리함을 보였다. 배양 24시간에 처리한 A23187과 calcium-activated neutral protease는 대조군에 비해 세포융합을 촉진시켰으나 동일 시기에 처리된 phosphoprotein을 정량함으로써 조사하였을 때, A23187이 배양 초기에는 대조군에 비해 약간 이 효소의 활성도를 높이는 효과를 보였으나 세포융합이 완성된 시기인 96시간에는 대조군에 비해 활성도를 높이는 효과를 보였으나 세포융합이 완성된 시기인 96시간에는 대조군에 비해 활성도의 차이를 나타내지 않았다. A23187 및 calcium-activated neutral protease에 의한 세포융합의 촉진, 그리고 A23187에 의한 protein kinase C 활성도의 증가가 모두 근원세포의 융합이 활발히 진행되는 시기인 배양 48-72 시간에 관찰됨을 볼 때, 세포내 칼슘의 농도는 protein kinase C 및 calcium-activated neutral protease와 상호연관을 가지면서 세포분화에 관여하는 것으로 사료된다.

  • PDF

Cloning and Regulation of Schizosaccharomyces pombe Gene Encoding Ribosomal Protein L11

  • Kim, Hong-Gyum;Lee, Jin-Joo;Park, Eun-Hee;Sa, Jae-Hoon;Ahn, Ki-Sup;Lim, Chang-Jin
    • BMB Reports
    • /
    • 제34권4호
    • /
    • pp.379-384
    • /
    • 2001
  • The cDNA encoding ribosomal protein was identified from a cDNA library of Schizosaccharomyces pombe. The nucleotide sequence of the 548 by cDNA clone reveals an open reading frame, which encodes a putative protein of 166 amino acids with a molecular mass of 18.3 kDa. The amino acid sequence of the S. pombe L11 protein is highly homologous with those of rat and fruit, while it is clearly less similar to those of prokaryotic counterparts. The 1,044 by upstream sequence, and the region encoding N-terminal 7 amino acids of the genomic DNA were fused into the promoterless $\beta$-galactosidase gene of the shuttle vector YEp357 in order to generate the fusion plasmid pHY L11. Synthesis of $\beta$-galactosidase from the fusion plasmid varied according to the growth curve. It decreased significantly in the growth-arrested yeast cells that were treated with aluminum chloride and mercuric chloride. However, it was enhanced by treatments with cadmium chloride ($2.5\;{\mu}M$), zinc chloride ($2.5\;{\mu}M$), and hydrogen peroxide (0.5 mM). This indicates that the expression of the L,11 gene could be induced by oxidative stress.

  • PDF

Xylanase 분비효모와 Xylose 발효효모의 Protoplast Fusion (Cell Fusion Between Xylose Fermenting Yeast and Xylanase Secreting Yeast)

  • 김남순;배명애;서정훈
    • 한국미생물·생명공학회지
    • /
    • 제17권2호
    • /
    • pp.88-93
    • /
    • 1989
  • Xylan성 biomass로부터 직접 alcohol을 얻고자 xylose 발효효모 X-6-41 균주의 NTG mutant인 X-6-41-1(his-) 균주와 xylanase 분비효모인 XB-33 의 NTG mutant XB-33-37(Arg-) 균주를 세포융합 시켰다. 원형질체 생성조건은 KYPX(XB-33), KYPD(X-6-41)에서 대수증식기 말기까지 증식한 세포를 집균하여 zymolyase(0.25mg/$m\ell$), cellulase (4mg/$m\ell$)와 100mM 2-mercaptoethanol 처리시 protoplast화 율은 X-6-41 경우 80%, XB-33인 45%로 나타났다. 선별된 융합체의 탄소자화능은 parent의 자화능을 서로 보완하였음을 확인하였고 xylan에서의 alcohol 발효는 2% xylan에서 발효 15 일만에 총당에 대해 0.28% alcohol 농도를 나타내었다. Parent와 fusant의 xylanase 활성은 완전배지 보다 최소배지상에서 높았는데 이것은 xylose 발효효모(X-6-41)의 경우 isoleucine에 의한 xylanase production inhibition 효과와 일치하였다.

  • PDF

경추 물림 금속판을 이용한 경추 전방추체간 유합술 (Anterior Cervical interbody Fusion with Cervical Spine Locking Plate)

  • 박주태;안길영;이영태;안면환
    • Journal of Yeungnam Medical Science
    • /
    • 제14권1호
    • /
    • pp.209-219
    • /
    • 1997
  • 포항 성모병원 정형외과에서 실시한 경추 전방유합술 및 A-O금속판 고정술을 병행하여 치료하고 13개월이상(평균 20개월) 추시가 가능하였던 경추 추간판 탈출증 환자 11례 및 외상환자 3례를 대상으로 관찰하여 다음과 같은 결과를 얻었다. 1. 경추 추간판 탈출 환자 11례 중 상지 방사통을 호소한 경우가 8례이었으며 감각 둔화 및 근력약화를 호소한 환자가 3례이었다. 2. 외상의 기전으로는 굴곡 회전손상 3례이었다. 3. 고정범위는 1개 분절고정이 12례, 두개 분절고정이 2례이었으며 술후 분절수에 관계없이 필라델피아 보조기를 이용해 조기 보행을(평균 2일) 시작하였으며 이러한 조기 보행으로 인한 불편함의 호소는 없었다. 4. 골유합은 이종골을 사용한 1례에서의 불유합을 보였으나, 동종골을 사용한 13례에서는 전례 모두 유합(평균 12주)을 보임으로 이종골 보다는 동종골의 이식에서 높은 유합율을 보였다. 5. 추간판 탈출환자 전례에서 증상의 호전이 있었으며 불완전 마비가 있었던 외상환자 3례에서도 술후 추시 기간 중 Frankel분류상 B에서 C등급으로 호전되었다. 6. 술후 합병증은 금속판 파열 1례 및 일시적인 사성 2례를 제외한 환부 혈종이나 나사못 파열 등의 다른 합병증은 관찰되지 않았다. 이상의 결과를 종합해 보면 전방 도달법에 의한 전방유합술 및 물림나사와 금속판을 이용해 시술한 경추 추간판 탈출증 및 외상 환자에 있어서 수술적 치료가 안전하고 압박된 신경에 대한 감압, 충분한 안정성 확보로 인한 외고정 기간의 단축 및 신속한 골유합을 기대할 수 있는 방법이며 기존의 금속판과 달리 후방 피질골을 관통하지 않기 때문에 척수의 손상을 피할수 있으며 수술중 방사선 피폭량도 줄일수 있어 권장할 만한 방법으로 사료된다.

  • PDF

용융 접합한 주철 - Al 합금의 금속간화합물 층 형성 거동에 미치는 열처리의 영향 (Effect of Heat Treatment on the Formation Behavior of Intermetallic Compound Layer in Fusion Bonding of Cast Iron and Al Alloy)

  • 강성민;한광식;강용주;김광원;임예라;문지선;손광석;김동규
    • 한국주조공학회지
    • /
    • 제32권1호
    • /
    • pp.50-56
    • /
    • 2012
  • Fusion bonding of cast iron and Al alloy is an effective way to improve the properties such as low inertia, high efficiency and corrosion resistance in machinery parts. In case of fusion bonding, intermetallic compound layers are formed at the interface between cast iron and Al alloy interface. It is important to control the intermetallic compound layers for improving bonding strength. The formation behavior of intermetallic compound layer by heat treatment has been investigated. Heat treatment was performed at temperature from $600^{\circ}C$ to $800^{\circ}C$ with $100^{\circ}C$ interval for an hour to investigate the phase transformation during heat treatment. Heat treated specimens were analyzed by using FE-SEM, EPMA and EDS. The EPMA/WDS results revealed that various phases were formed at the interface, which exhibited 4 distinct intermetallic compound layers such as ${\tau}_6-Al_{4.5}FeSi$, ${\tau}_2-Al_3FeSi$, ${\tau}_{11}-Al_5Fe_2Si $and ${\eta}-Al_5Fe_2$. Also, fine precipitation of ${\tau}_1-Al_2Fe_3Si_3$ phase was formed between ${\tau}_{11}$ and ${\eta}$ layer. The phase fraction in intermetallic compound layer was changed by heat treatment temperature. At $600^{\circ}C$, intermetallic compound layer of ${\tau}_6$ phase was mainly formed with increasing heat treatment time. With increasing heat treatment temperature to $800^{\circ}C$, however, ${\tau}_2$ phase was mainly distributed in intermetallic compound layer. ${\tau}_1$ phase was remarkably decreased with increasing heat treatment time and temperature.

Craniovertebral Junction Tuberculosis with Atlantoaxial Dislocation : A Case Report and Review of the Literature

  • Lee, Dae-Kyu;Cho, Keun-Tae;Im, So-Hyang;Hong, Seung-Koan
    • Journal of Korean Neurosurgical Society
    • /
    • 제42권5호
    • /
    • pp.406-409
    • /
    • 2007
  • Craniovertebral junction (CVJ) tuberculosis is a rare disease, potentially causing severe instability and neurological deficits. The authors present a case of CVJ tuberculosis with atlantoaxial dislocation and retropharyngeal abscess in a 28-year-old man with neck pain and quadriparesis. Radiological evaluations showed a widespread extradural lesion around the clivus, C1, and C2. Two stage operations with transoral decompression and posterior occipitocervical fusion were performed. The pathological findings confirmed the diagnosis of tuberculosis. Treatment options in CVJ tuberculosis are controversial without well-defined guidelines. But radical operation (anterior decompression and posterior fusion and fixation) is necessary in patient with neurological deficit due to cord compression, extensive bone destruction, and instability or dislocation. The diagnosis and treatment options are discussed.

탄소 및 탄소화합물이 도핑된 $MgB_2$ 초전도체의 볼밀링 효과 (Effect of Ball-Milling on the Superconducting Properties of C and C-Based Compound Doped $MgB_2$)

  • 안중호;장민규;오상준
    • Progress in Superconductivity
    • /
    • 제10권1호
    • /
    • pp.17-22
    • /
    • 2008
  • We have examined the effect of ball-milling on the superconducting properties of $MgB_2$ doped with C. The ball-milling of pre-reacted $MgB_2$ powder was carried out in dry or wet state using C or diethylenetriamine ($C_{4}H_{13}N_3$) as additives. The diethylenetriamine, whose chemical formula contains no oxygen, was chosen to avoid an excess oxidation during doping. The superconducting transition temperature (Tc) of the ball-milled or doped $MgB_2$ powders was only slightly smaller than that of undoped $MgB_2$. The critical current density (Jc) of the highly ball-milled $MgB_2$ was higher than that of C-doped $MgB_2$. The addition of diethylenetriamine was detrimental to Jc, although Tc was almost unchanged.

  • PDF

EPDM고무와 씨트라코닉산의 melt grafting - 반응조건과 개시제에 따른 영향 연구 - (Melt Grafting of Citraconic Acid onto an Ethylene-Propylene-Diene Terpolymer (EPDM) -Effect of Reaction Conditions and Initiator Type on the Melt Grafting of Citraconic Acid onto EPDM-)

  • 김정수;배종우;이진혁;오상택;김구니;이영희;김한도
    • Elastomers and Composites
    • /
    • 제48권1호
    • /
    • pp.39-45
    • /
    • 2013
  • Haake Rheocorder로 각종 과산화물 개시제를 사용하여 ethylene-propylene-diene terpolymer (EPDM)에 단량체 citraconic acid (CCA)을 용융 그라프트 중합을 하여 그라프트 중합물 CCA-g-EPDM을 얻었으며, 이때 효율적인 그라프트 정도와 우수한 성능을 지닌 그라프트 중합물을 얻기 위해서 최적의 반응조건과 최적의 단량체/개시제 농도를 찾는 것은 매우 중요하다. 따라서 본 연구에서는 반응조건과 단량체 및 개시제 함량이 CCA-g-EPDM의 그라프트 정도, 그라프트 효율, 가교정도 (겔화도), 용융흐름지수(MI) 및 기계적 물성 등에 미치는 영향에 초점을 맞추었다. 그라프트 정도와 가교도가 증가함에 따라서 인장강도는 상당히 증가한 반면, 파괴신도 및 MI는 감소하였다. 개시제 중에서 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101)가 가장 우수한 그라프트 정도 (2.31%)를 나타내었으며, CCA와 T-101의 함량이 증가함에 따라 그라프트 정도가 크게 증가하였다. 그리고 그라프트 정도는 반응(혼합)온도 및 반응시간이 증가함에 따라 역시 증가하다가 어느 온도/시간 이상에서는 안정화 혹은 약간 감소하는 경향을 나타내었다. 이러한 영향으로 결과로부터 최적의 단량체/개시제 농도는 5/0.05 wt%이었으며, 최적의 반응온도/시간은 $180^{\circ}C$/15분인 것을 알 수 있었다.