• 대한화학회지
• /
• 제28권5호
• /
• pp.315-322
• /
• 1984

滴下水銀電極에서 0.1M KCl 수용액에 포함되어 있는 單純金屬이온 In(III), Cr(III), Cd(II), Pb(II), Mn(II), Co(II), Tl(I)의 還元에 대한 폴라로그래프법적 파라미터의 壓力에 따른 變化를 조사하였다. 溫度는 $25^{\circ}C$에서 $^35^{\circ}C$까지 變化시켰으며, 壓力은 1氣壓에서 1,800氣壓까지 300氣壓 單位로 바꾸었다. 壓力이 增加함에 따라 모든 金屬이온의 還元半波電位가 $8{\mu}V/atm\;{\sim}\;66{\mu}V/atm$ 정도 陰電位쪽으로 移動하였으며, 擴散電流의 값은 $1.3{\times}10-3%/atm\;{\sim}\;2.3{\times}10-2%/atm$ 정도 增加하였다. 또한 壓力이 增加함에 따라 각 加電壓 E와 log[$\frac{id-i)}{i}$]를 plot하여 얻은 直線의 기울기가 커지는 것으로부터 壓力을 增加함에 따라 還元反應의 可逆性이 減少한다는 事實을 알 수 있었다. 한편 $25^{\circ}C\;{\sim}\;35^{\circ}C$의 범위에서 구한 溫度係數는 壓力增加에 따라 크게 변하지 않았다.

• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.314-321
• /
• 1996

Isoxazolidine derivatives 7 and 8 were synthesized from N-benzyl-C-(2-benzyloxyethyl)nitrones by 1,3-dipolar cycloaddition with ethyl crotonate. The isoxazolidine derivatives were converted to β-amino acid esters 9a and 9b by reduction with zinc in acetic acid. The β-amino acid esters were reacted with methylmagnesium bromide to give the 2-azetidinones (13a, 13b). The benzyl group of 2-azetidinones were removed by Birch reduction. The products were oxidized with PDC to give 3-[1-(t-butyldimethylsilyloxy)ethyl]-4-carboxymethyl-2-azetidinone derivatives (2a, 2c).

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.59-64
• /
• 2023

본 논문은 전자기기에 사용되는 전원의 노이즈 저감을 위한 전도성(Conducted) EMI 필터의 경험적 설계를 통하여 제안하였다. 제안된 구조는 A형, B형, C형, D형의 구조를 설계하였으며, 다양한 X-커패스터와, Y-커패스터, Air-인덕터로 LC 네트워크 사용으로 전도성 노이즈 저감을 확인하였다. L1, L2는 10[μH]를 사용하였으며, C1, C2는 4.7[nF]를 사용하였다. 공통모드(Common Mode)용 L3는 13[μH]를 사용하였으며, C5, C6, C7은 10[nF]을 사용하여 설계하였다. 설계된 EMI 필터의 측정된 삽입손실 값은 3.2MHz에서 -74.4[dB], 4MHz에서 -75.4[dB], 13.56MHz에서 -75.3[dB]로 나타났다. 따라서 제안한 EMI 필터는 다양한 전자기기에 사용되는 전원 노이즈 저감에 이용될 것이다.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.147-156
• /
• 1999

Current design code states that the strength reduction factor shall be permitted to be increased linearly from that for axial compression to that for flexure as the design axial load strength $\Phi$cPn decrease from 0.1fckAg to zero. Since this empirically adopted axial load level of $\Phi$cPn=0.1fckAg considers only sectional area and concrete strength, the other variables such as steel ratio, steel yielding strength, and steel arrangement can not be considered. This research is performed to investigate the consistency and the rationality of the code requirement for determination of column design strength. A nonlinear axial force-moment-curvature analysis was conducted in order to investigate the ductility of reinforced concrete column sections. As the result of ductility analysis, it was found that the ductility at the axial force of $\Phi$cPn=0.1fckAg represented a lock of consistency for the various variable contained sections. Therefore, a more reasonable application method of strength reduction factor is proposed, that is based on the strain ductility index.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.543-546
• /
• 2008

In the present study, the effect of cold reduction ratio on the spherodization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $800^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ for 5 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure. Cold rolling was conducted on the sheets of fine pearlite by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 0.1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• Journal of Korean Neurosurgical Society
• /
• 제41권4호
• /
• pp.248-251
• /
• 2007

Atlantoaxial rotatory dislocation [AARD] is an uncommon disorder of childhood in which clinical diagnosis is generally difficult and often made late. It is very rare in adults because of the unique biomechanical features of the atlantoaxial articulation. We report a case of post-traumatic AARD in an adult. Reduction was difficult to obtain by skull traction and gentle manipulation. Therefore, the patient was treated surgically by an open reduction, transpedicular screw fixation, and posterior C1-2 wiring with graft. The normal atlantoaxial relation was restored with disappearance of torticollis. Postoperatively, the patient remains neurologically intact and has radiographic documentation of fusion. Atlantoaxial transpedicular screw fixation can be one of the treatment options for the AARD.

• 분석과학
• /
• 제6권1호
• /
• pp.83-92
• /
• 1993

0.05M TEAP를 지지전해질로 한 아세톤용액에서, 란탄늄 및 네오디늄과 몇 가지 리간드의 착물에 대한 전기화학적 거동인 환원전류의 유형, 가역성, 안정도상수, 전류함수 등을 폴라로그래피와 순환전압전류법으로 조사하였다. 환원파는 2단계로 나타났으며, 반응은 확산지배적이고 비가역적이었다. 또한 란탄족 금속이온의 착물에 대하여 안정도상수를 측정하였다.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.447-453
• /
• 2014

Effect of oxygen content in the ultrafine tungsten powder fabricated by electrical explosion of wire method on the behvior of spark plasma sintering was investigated. The initial oxygen content of 6.5 wt% of as-fabricated tungsten powder was reduced to 2.3 and 0.7 wt% for the powders which were reduction-treated at $400^{\circ}C$ for 2 hour and at $500^{\circ}C$ for 1h in hydrogen atmosphere, respectively. The reduction-treated tungsten powders were spark-plasma sintered at $1200-1600^{\circ}C$ for 100-3600 sec. with applied pressure of 50 MPa under vacuum of 0.133 Pa. Maximun sindered density of 97% relative density was obtained under the condition of $1600^{\circ}C$ for 1h from the tungsten powder with 0.7 wt% oxygen. Sintering activation energy of $95.85kJ/mol^{-1}$ was obtained, which is remarkably smaller than the reported ones of $380{\sim}460kJ/mol^{-1}$ for pressureless sintering of micron-scale tungsten powders.

• 환경위생공학
• /
• 제21권4호
• /
• pp.49-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 2%, 4% and 8%-crosslinking and 1-aza-18-crown-6 macrocyclic ligand by copolymerization method. Content of chlorine in styrene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased 1%, 2%, 4% and 8% DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-18-C-6 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Thermo analysis curve of functional synthetic resin decomposed three part of 1-aza-18-C-6, styrene, and DVB. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.64-71
• /
• 2013

In this study we designed a lean $NO_x$ trap (LNT) model with $GT-POWER^{TM}$ program and then the LNT model was compared to the bench flow reactor test results. This model consists of 9 kinetic reactions to represent the main steps of NO oxidation, $NO_x$ adsorption, $NO_x$ release and then its reduction. The comparison was performed on the operating conditions at the space velocity of 50,000 1/hr and 80,000 1/hr with the temperature range of $200^{\circ}C{\sim}500^{\circ}C$ with the even spaced temperature step of $50^{\circ}C$. The experimental results show that the $NO_x$ conversion efficiency was enhanced by the temperature up to $350^{\circ}C$ and then decayed at higher temperatures. The LNT model predicts the similar trend of the $NO_x$ conversion efficiency to the experimental results below $350^{\circ}C$, but overestimates above $350^{\circ}C$. This overestimation comes from the higher reduction efficiency which was obtained by the different reduction gas composition such as $C_3H_6$ in the model to replace $CH_4$, $C_2H_4$ in the bench test.