• Elastomers and Composites
• /
• 제7권1호
• /
• pp.53-58
• /
• 1972

Sublimatographic study on the method of test for sulfur in the petroleum and rubber products was as following results: (1) The relation between the heating temperature$(t_h)$ and the vacuum condensing point(V.C.P.) of sulfur at different degree of vacuum appeared as Fig.4. The results were in good agreement with those expected from the $t_h-V.C.P$ curves of sublimatographic separation of sulfur. (2) The relation between the degree of vacuum and the V.C.P. at different heating temperature of sulfur appeared as follows; $$tv.c.p.=\alpha+{\beta}logP_{va}$$ (3) The V.C.P of sulfur could be physical property comparing with melting point and boiling point. (4) The relation between the V.C.P. and the quantity of sublimation of sulfur becomes quantitative as Fig.7.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.111-116
• /
• 2004

The Ni/SiC Schottky diode was fabricated with the $\alpha$-SiC thin film grown by the ICP-CVD method on a (111) Si wafer. $\alpha$-SiC film has been grown on a carbonized Si layer in which the Si surface was chemically converted to a very thin SiC layer achieved using an ICP-CVD method at $700^{\circ}C$. To reduce defects between the Si and $\alpha$-SiC, the surface of the Si wafer was slightly carbonized. The film characteristics of $\alpha$-SiC were investigated by employing TEM (Transmission Electron Microscopy) and FT-IR (Fourier Transform Infrared Spectroscopy). Sputterd Ni thin film was used as the anode metal. The boundary status of the Ni/SiC contact was investigated by AES (Auger Electron Spectroscopy) as a function of the annealing temperature. It is shown that the ohmic contact could be acquired beyond a 100$0^{\circ}C$ annealing temperature. The forward voltage drop at 100A/cm was I.0V. The breakdown voltage of the Ni/$\alpha$-SiC Schottky diode was 545 V, which is five times larger than the ideal breakdown voltage of the silicon device. As well, the dependence of barrier height on temperature was observed. The barrier height from C- V characteristics was higher than those from I-V.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1337-1345
• /
• 2012

한반도 전구에서 적용되고 있는 EBO의 핵심교리는 측정 가능한 효과를 선정하여 최소의 전투로 승리하는 것이다. 이러한 EBO 교리를 고찰하여 무기체계 획득에 요구되는 방법론으로 V-C 연동체계 하에서의 효과분석 방법론을 연구 제시하였다. 제시된 방법론은 먼저 편성된 무기체계의 효과 정보를 확인하고 분석목적을 고려하여 MOE와 MOP, 효과를 설정하며 적정 무기체계의 운용개념과 시나리오 등을 적용하고 가용 C모델로 사후분석 조정 환류 하는 것이다. V-C 연동체계는 가상 합성 전장 환경에서의 실시간 전투실험을 가능케 한다. 이러한 V-C 연동체계에서 미래 대전차 유도무기체계의 방어전투 편성과 배치 등을 고려한 모델링으로 대대급 작전으로 중대급 개체를 운용하는 시나리오를 작성, AWAM을 구현하여 효과를 분석하고 SBA 토대를 구축하였다.

• BMB Reports
• /
• 제54권8호
• /
• pp.425-430
• /
• 2021

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) induces coronavirus disease 2019 (COVID-19) and may increase the risk of adverse outcomes in lung cancer patients. In this study, we investigated the expression and function of mucin 1 (MUC1) after SARS-CoV-2 infection in the lung epithelial cancer cell line Calu-3. MUC1 is a major constituent of the mucus layer in the respiratory tract and contributes to pathogen defense. SARS-CoV-2 infection induced MUC1 C-terminal subunit (MUC1-C) expression in a STAT3 activation-dependent manner. Inhibition of MUC1-C signaling increased apoptosis-related protein levels and reduced proliferation-related protein levels; however, SARS-CoV-2 replication was not affected. Together, these results suggest that increased MUC1-C expression in response to SARS-CoV-2 infection may trigger the growth of lung cancer cells, and COVID-19 may be a risk factor for lung cancer patients.

• Journal of Chest Surgery
• /
• 제17권1호
• /
• pp.157-166
• /
• 1984

These biologic test procedures are designed to test the suitability of P.V.C. made in Korea intended for parenteral preparation, which were based on the U.S. Pharmacopeia XIX "Biologic Test-Plastic Container", Official from July 1, 1975. Healthy adult human blood and rabbits weighing 2\ulcorner.2Kg were used for test materials. Sample P.V.C. were sampled from the medical equipments made in Korea randomly and Control P.V.C. were sampled from the standardized Cobe and Polystan P.V.C. tubes. P.V.C. extract was prepared from a homogeneous P.V.C. samples by incubating 60 square centimeters of the sample per 20 millimeters of sterile pyrogen-free saline at 70\ulcorner for 72 hours or autoclaving at 120\ulcorner for 1 hour. The Implantation Test was designed to evaluate the reaction of living tissue to the plastic by the method of the implantation of the Sample itself into animal tissue. The Systemic Injection Test, the Intracutaneous Test, and the remainders were designed to determine the biological response of animals to plastics by the single-dose injection of specific extracts prepared from a Sample. The results are as follows; 1.Implantation Test - No significant difference for reactions was noted between the Sample treated animal and the Control after 72 hours of implantation. 2.Systemic Toxicity Injection Test - No sign of toxicity and/or death immediately after injection and at 4, 24, 48 hours respectfully after injection. 3.Intracutaneous Test - None of the animals treated with the Sample showed a significantly greater reaction than the observed in the animals treated with Blank. 4.Pyrogen Assay-Only one animal treated with the Sample showed the maximal rise of rectal temperature about 0.2\ulcorner after 3 hours of injection, but remainders showed no change. 5.Hemolytic Index - The positive Control tube of distilled water exhibited complete hemolysis while the negative Control tube and P.V.C. extract were negative demonstrating no hemolysis. 6.Cell Morphology of Erythrocytes and Leukocytes on Stored, Heparinized Human Blood -- There was no significant difference in the morphology of either the Control or Sample extract. 7.Clotting Mechanism of Human Blood in vitro - After allowing to the P.V.C. extract at room temperature for 5 Hours and at 10\ulcorner for 24 hours, there was no appreciable difference in Prothrombin Time under these conditions. 8.Clotting Mechanism of Rabbit in vivo - At the termination of 5 days after intraperitoneal injection of the P.V.C. extract, no significant changes in Clotting Time were observed. According to the above results, it could be concluded that the P.V.C. made in Korea was acceptable for parenteral preparation, especially treated with physiologic saline and/or human blood.man blood.

• 약학회지
• /
• 제40권2호
• /
• pp.193-201
• /
• 1996

In order to study the role of C-terminal aromatic region of T4 endonuclease V in the interaction with substrate DNA, NMR and Fluorescence spectrum were recorded. Analysis of flu orescence emission spectra showed that C-terminal region of T4 endonuclease V is in or very near the binding site. In the HSQC spectrum of $^{15}N$-Tyr-labeled T4 endonuclease V*DNA complex, the broadening of a peak was observed. It is presumed that this peak corresponds to one among three tyrosine residues which belong to the WYKYY segment of C-terminal region of T4 endonuclease V. Interactions of peptide fragments consisting of C-terminal residues of T4 endonuclease V with DNAs(TT-, T^T-DNA) were investigated by NMR and Fluorescence experiment. The results suggest that two peptide fragments themselves bind to DNAs and their binding pattern is not an intercalation mode.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.59-64
• /
• 1998

[ $CaSO_4$ ] thermoluminescent phosphors was made by sintring the $CaSO_4$ after doping the transition elements Tm, Pd, Dy, V, Mo, Zr. The maximum Peaks are found in the measured $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr) TL glow curve at $130^{\circ}C,\;110^{\circ}C,\;140^{\circ}C,\;100^{\circ}C$, and $120^{\circ}C$ when the heating rate is $5^{\circ}C/sec$. The activation energy of the main peak has been estimated by the peak shape method. The estimated activation energies are 1.02eV, 1.32eV, 1.12eV, 0.80eV, and 1.17eV, respectively. The thermoluminescence process in $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr)are found to the 2nd order when the main peak of the glow curve is analyzed by peak shape method. The dose responses of $CaSO_4$(Tm, Pd, Dy, V, Mo, Zr) phosphors are linear within $4{\times}10^{-4}{\sim}1Gy$ of X-rays.

• 한국식품영양학회지
• /
• 제11권3호
• /
• pp.334-339
• /
• 1998

4~1$0^{\circ}C$ 냉장조건에서 신선한 광어의 이화학적 저장 안정성 증진을 목적으로 초산(v/v), 유산(v/v), 및 구연산(w/v) 침지 후 pH, TBA, 색도 및 관능평가에 대한 영양을 조사하였다. 4개의 처리구로 만든 광어는 각 0.5%의 초산, 유산, 및 구연산의 위생수에서 5분 침지 후 처리구별로 Whirl-Pak저장백에 넣은 다음 실험에 사용하였다. 5분 동안 초산 처리구의 pH 값은 4$^{\circ}C$, 12일 저장 동안 5.39에서 6.64의 범위에 존재하였다. 유기산 처리구는 저장기간 동안 대조구보다 낮은 pH 값을 유지하였으며 유산 및 구연산 처리구는 저장 9일 이후 유의적인 차이가 없었다. 유기산 처리구의 TBA 값은 4$^{\circ}C$ 저장동안 대조구보다 유의적(P<0.05)으로 높게 유지되었다. 각 유기산 처리구의 Hunter a, b값은 대조구보다 낮았으며, Hunter L 값은 대조구보다 높았다. 산 처리구의 관능평가 결과는 산 냄새 및 변색으로 신선한 대조구보다 낮게 좋았다.

• 대한전자공학회논문지SD
• /
• 제39권9호
• /
• pp.62-71
• /
• 2002

본 논문에서는 용량형 압력센서의 비선형성 문제를 해결하기 위한 적분형 C-V 변환기를 제안하였다. 이 변환기는 스위치 커패시터 적분기와 스위치 커패시터 차동증폭기로 구성되어 있으며 인가된 압력에 반비례하는 센서용량을 전압으로 변환하여 선형적으로 출력한다. 제안된 적분형 C-V 변환기는 PSPICE 시뮬레이션에서 초기 전극간격의 90%에 해당하는 큰 변위에 대해서 0.01%/FS 이하의 매우 낮은 비선형도와 오프셋 용량 및 기생용량에 둔감한 우수한 특성을 보였다. 또한 센서신호처리의 필수기능인 오프셋 보정 및 이득조정이 적분형 C-V 변환기에서 용이하게 구현됨을 보였다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.435-438
• /
• 2000

토양으로부터 2종류 그리고 해양으로부터 1종류의 원유 분해 미생물을 분리하였고, 이들을 strain A132, strain F722 그리고 strain OM1으로 각각 명명하였다. 이들 미생물은 Acinetobacter sp., Pseudomonas aeruginosa, Acinetobacter calcoaceticus로 각각 동정되었다. Strain A132. F722의 최적 배양 및 분해온도는 $35^{\circ}C$ 이고, 최적 생장 pH는 각각 8과 9에서 나타났다. 원유를 유일한 탄소원으로 하여 배양을 하였을 때 원유농도 2.0%(w/v)에서 생장이 높았다. 한편, 해양에서 분리된 strain OM1은 pH 7, 원유농도 3.0%(w/v)에서 생장이 높았다. 원유 분해능 조사에서는 Eleuthera (OMAN) 원유를 2.0%(w/v) 기질로 하였을 때, strain A132가 $25^{\circ}C$에서 $5.49g/\;l\;{\cdot}\;day$의 분해능을 나타내었다. 반면, L-Zakum (AFRICA) 원유에서는 strain F722가 $35^{\circ}C$에서 $1.19g/\;l\;{\cdot}\;day$의 분해능을 보였다. 등유$(nC_9-nC_{20})$와 경유$(nC_9-nC_{28})$에 대하여 분해특성을 조사한 결과 strain OM1은 배양 7일 후 95, 75%를 각각 분해하였다. Strain F722는 배양10일 후 80%의 분해율을 나타내었다.