• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.155-160
• /
• 1987

The investigation includes the application of $ZrSiO_4-Cd(SxSe_{1-x})$stain to ceramic body. The currently developed stain was compared to the commercially available stain in applying to ceremic glaze. Two stains (currently developed and commecially available) were mixed with frits and applied to ceramic tiles. The tiles were fired at 850 to 120$0^{\circ}C$ and tested by colorimeter in X.Y.Z. axis of the wavelength ranging from 580nm to 650nm. Applicability 18 stains to ceramic body was investigated by ISCC-NBS of Munsell color nomenclature. $ZrSiO_4-Cd(SxSe_{1-x})$stain is as good as V and Pr series stain in mixing composition of frits 9 to 1. It maintains red color at 100$0^{\circ}C$ in the mixture of frits, and shows as the strong acid resistance stain.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.213-221
• /
• 2012

The purpose of this study was to evaluate the stability of external stain that long term attrition caused by tooth brushing affected the color variation of external stain of IPS e.max Press Porcelain. The specimen was made by IPS e.max Press LT ingots, and treated the shade of external staning as Orange, A, B, C, D After conducting horizontal toothbrush strokes about 11,000 / 22,000 / 44,000 / 66,000 / 88,000, Color changers of the external stained layer was measured with SpectroShade$^{tm}$ MICRO(MHT, Italy). The result of this study was obtained as follows: 1. After 11,000 strokes, the color changes of shade were greater in Orange shade than the other 4 shade groups. And even though toothbrush strokes were increased until 88,000, there were no statistical significant color changes about the external stain shade variation. 2. The amount of color variation about increasing of toothbrushing strokes was irregular(no consistent increasing, or decreasing), and it was no statistical significant changes According to these results, the long term tooth-brushing doesn't affect the changes of external stain about IPS e.max press porcelain. And it doesn't reduce the stability of external stain clinically. Later, it will be needed to study other factors affecting the external stain.

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.125-140
• /
• 2007

Objectives: This study was performed to investigate the effects of acupuncture therapy(AT, AT-9), electro-acupuncture therapy(EAT) and low level laser acupuncture therapy(LAT) at LRJ on the focal ischemia-induced by intraluminal filament insertion in rats. Methods : In the present syudy, the focal ischemia was induced by Intraluminal filament insertion into left middle cerebral artery. The subjects were divided into five groups after focal brain ischemia. (n=15, in each group) : Control with no treatment, AT with acupuncture at $LR_3$, AT-9 with acupuncture at $LR_3$ and rotating 9 times in a clockwise direction, EAT with electro-acupuncture at $LR_3$ and LAT with invasive laser acupuncture at $LR_3$. Anti-apoptotic and neuroprotective effects of acupuncture were observed by mGluR5 mRNA, Bax mRNA, Bcl-2 mRNA, Cytochrome C protein, Cresyl violet-stain and Choline acetyltransferase (ChAT)-stain in the hippocampus. Results: 1. In LAT, mGluR5, Cresyl violet-stain and ChAT-stain were increased. 2. In LAT, Cytochrome C protein was decreased. 3. In AT-9, Bax, Cytochrome C protein and the Bax/Bcl-2 ratio were decreased. 4. In AT-9, Bcl-2, Cresyl violet-stain and ChAT-stain were increased. 5. In EAT, Bcl-2 and Cresyl violet-stain were increased. Conclusions: These results suggests that LAT and AT-9 show anti-apoptotic and neuro-protective effects and that LAT and AT-9 may be useful for managing stroke by focal brain ischemia.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.317-326
• /
• 1995

The purpose of this study was to establish a method for in vitro culture of C parvum isolated in Korea by determination of suitable cell model to complete development of this parasite. The result obtained were summerized as follows: 1. To determine the most suitable cell line, six types of cell line were examined by microscopy. All cell lines were infected with C parvum and showed the highest infection score in HmLu cells. 2. The staining methods including DMSO-modified acid-fast(A-F) stain, hematoxylin-eosin(H & E) stain and immunofluorescence antibody(IFA) stain were applied to examine the infection of C parvum in cell culture. These staining methods were possible to examine the infection of C parvum in cell culture. The most sensitive one was IFA staining technique. 3. Developmental stages of C parvum in HmLu cell were observed. After the initial 8 hour incubation period, some trophozoites were observed. The meronts and gametes were appeared at 24-48 hour post inoculation(PI), and oocysts were observed firstly at 48-72 hour PI. 4. In H & E stain, the parasite appeared as basophilic within parasitophorous vacuole membrane(PVM) and lying in cytoplasm at near the nucleus of the host cells. It was able to distinguish the type I, type II meronts and gametes. 5. In DMSO-modified acid-fast stain, specific stained parasites were appeared firstly after 48 hour PI. The parasites were showed with different degrees of staining bright red color within PVM. 6. The endogenous stages of parasites in HmLu cell recovered at 48, 96, 120 and 144 hour after inoculation were reacted with rabbit immunized serum in immunofluorescence antibody and avidin-biotin complex peroxidase staining technique.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.50-54
• /
• 1986

Effects of additionof $NH_4Cl$, NaBr and LiF on the formation of Zircon and the synthesis of CdS-Se red stain were investigated by means of XRD, DTA and the color standard and color nomenclature. The red stain of CdS-Se system shows a little difference dependent on firing temperature on firing conditon. Consequently it forms a good soid-solution with red color under the ratio of CdS and Se 3.5 -4.1 at 58$0^{\circ}C$. But it changes to dark red as increasing Se. LiF is the most effective in mineralizer to preparae zircon with the equilbrant molar $SiO_2$ and ZrO Zircon makes a good preparation in 0.33 mole LiF from 90$0^{\circ}C$.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2002

In this study, the physical properties of starch adhesive by temperature in carrier and main part for the Stain-Hall method were analyzed. The temperatures of starch solutions in carrier part were inversely proportional to the viscosities. The viscosities of starch solutions were maintained similarly if 2nd temperatures were same independent on the those of the 1st temperatures in carrier part. the starch solutions showed similar viscosities in all range except the viscosity of the solutions in $30^{\circ}C\;and\;40^{\circ}C$. The viscosities of starch adhesives in main part were in proportion to those of starch solutions in carrier part. The viscosities of starch adhesives in main part were maintained similarly if 2nd temperatures in carrier part were same. The viscosities of starch adhesives in main part were low when the ultimate temperature of starch solutions in carrier part were high.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.178-183
• /
• 2014

BACKGROUND: The white stain symptom of grape clusters and canes by dust-like particles occurred in many vineyards recently. This study was conducted to investigate the ecological characteristics of white stain symptom in grapevines and vineyards. METHODS AND RESULTS: Optimal climate condition for white stain symptom was $25^{\circ}C{\sim}30^{\circ}C$ with 60% of humidity. Moreover, closed condition with same humidity showed higher incidence rate of white stain symptom than ventilation condition. Grape varieties with black berry skin such as Campbell-Early and Kyoho were more sensitive to white stain symptom compare to varieties with green and red berry skin. Although the pathogens were not detected until March, they increased from April, and increased sharply from mid of July. The pathogens may overwinter in the infected stems and/or on the bark as a mycelium. According to the increase of sugar content of grape from August to September, the mycelium which was parasitic on the bark grew to move to the fruits through the stems, and finally reached the fruit stalk to detach berries from the clusters. CONCLUSION: Well ventilation is recommended inside the vineyard since mid-July with roll up an insect net. In addition, infected stems and fruits should be removed out from grapevines infected with pathogens in the vineyards.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.378-384
• /
• 1998

We investigated the possibility of systemizing data for the colour gradation of classical ceramics by build-ing program and D-basing each data information in pottery field that has been fall behind in forming data be-cause of many variable and lacking of data system. In this study we manufactured $CoAl_2O_4$ stain that has stable spinel structure at high temperature and then mixed base glaze with stain for the additive per-centage of 0.5 , 1, 5, 10, 15 wt% In thie colouring of Lime base glaze with the wide ranged melting tem-perature the colour development of cobalt-blue sintered at $1250^{\circ}C$ is better than that of $1150^{\circ}C$ $1350^{\circ}C$ The experimental conditions and data are D-based simulated programming of computer. The result of -based data appeared to be more smoothed fusion-adherence in the Matt glaze range of Lime base glaze, The variation of colouring is not found when additive content of glaze is more than 5 wt% and the stable colour development of stain was shown at the content that RO, $R_2O$ percentage is high (the content that R2O3 per-centage is low)

• Journal of Acupuncture Research
• /
• v.26 no.3
• /
• pp.81-92
• /
• 2009

Objectives: Burn is a severe dermal injury caused by heat. We were to investigated the effects of acupuncture or pharmacopunture treatment for the histologic and morphologic recovery on the mouse with the 3rd grade burn skin. Methods : We divided into 3 groups. One was a control group(n=3) that was not treated any treatments. Another was a acupuncture group(n=3) that was treated only acupuncture. The other was a pharmacopuncture group(n=3) that was treated only pharmacopuncture. We made a 3rd grade burned skin with the stainless steel heating apparatus. We made a treatment for the mice for a week(2 times for a day, totally 14 times treatments). We observed a dermal morphologic recovery on the mice and a histopathological photographs of the burn skin and subcutaneous tissue with H&E stain, Masson's trichrome stain, and VEGF, FGF and c-kit immunohistochemical stain. Results : The pharmacopuncture group were a better morphologic recovery than control group and acupuncture group. And the pharmacopuncture group were a better histopathological recovery than control group and acupuncture group on the burn skin and subcutaneous tissue with H&E stain, Masson's trichrome stain. And the pharmacopuncture group were a better histopathological recovery than control group and acupuncture group on the burn skin and subcutaneous tissue with VEGF, FGF and c-kit immunohistochemical stain. Conclusions : We suggest that the pharmacopuncture treatment is a better histologic and morphologic recovery than the no treatment or the acupuncture group with the burned mouse skin.

• Journal of the Korean Ceramic Society
• /
• v.43 no.10 s.293
• /
• pp.601-606
• /
• 2006

For the purpose of development of red color stain body, bone body which can be fired at 1180$^{\circ}C$ and has a higher degree of whiteness and transmission was developed and a property experiment depending on the content of $Fe_2O_3$ was performed. For manufacturing this body, 9% addition of bone ash to commercialized white body resulted in the best whiteness and proper physical characteristics. In an experiment of oxidized iron addition using this body as a basis, red color stain body fired up to 1150$^{\circ}C$ following the addition of 6% oxidized iron showed physical characteristics such as 5.4R color closer to theory color, 0.08% water absorption rate, 9.1% shrinkage, and 1861 kgf/$cm^2$ bending strength, which implies that this body is suitable for red color stain body.