• 수산해양기술연구
• /
• 제42권4호
• /
• pp.210-216
• /
• 2006

The circle hook experiments were conducted to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the eastern Pacific Ocean between $1^{\circ}48'S-7^{\circ}00'S\;and\;142^{\circ}00'-149^{\circ}13'W$ from July 15 to August 12, 2005. In the target species group no significant differences among 3 types hook, between size 4.0 traditional tuna hooks(J-4) and size 15 circle hooks(C15), and between C15 and size 18 circle hooks(C18) were revealed, but significant differences were found between J-4 and C18. In the bycatch species group significant differences were found among 3 types hook, between J 4 and C15, and between J-4 and C18, but no significant differences were revealed between C15 and C18. Large circle hook(C18) had the lowest catch rate for tunas and for other fishes, and the small circle hook(C15) had lowest rate for billfishes and sharks. The length distributions for bigeye tuna are very similar for the 3 hook types. There were very slight differences in length size between hook types in the bycatch species.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.81-87
• /
• 2008

C-Hook is a kind of conveyer system for transporting steel coil in POSCO. To detect the current position and the trajectory of steel coils in a plant, C-Hooks are tracked by an inspection system based on PLC. The inspection system detects transit of C-Hooks by monitoring a physical contact between steel bars on a C-Hook and the inspection sensors. However, this system is not reliable because of the abrasion, damage and aging. Moreover, the number of distinguishable C-Hooks is limited by the number of combination of steel bars on a C-Hook. It means that more steel bars should be installed for distinguishing the more C-Hooks. Therefore, the conventional system is difficult and expensive to maintain. To overcome these problems, we propose a C-Hook identification system that uses RFID which is a non-contact type identification system, and evaluate its performance and applicability from a new monitoring program that operates along with the conventional system in the real environment of POSCO.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.413-415
• /
• 2006

Wire rods are carried by C-Hooks and are tracked by bringing the inspection sensors into contact with steel bars on the C-Hooks. However, the conventional system using mechanical equipment is not reliable due to aging, wearing and bending of steel bars. To overcome these problems, a non-contact type identification system is required. This paper introduces the radio frequency identification(RFID) technology which is one of the most popular non-contact identification methods, and evaluates its performance in the real environment of POSCO. Specifically, we use tags which are designed for operating on high temperature and allowing easy attaching and detaching on the C-Hook. A new monitoring program is developed for reacting upon the conventional system and showing the results of reading of reading tags.

• 한국어류학회지
• /
• 제20권2호
• /
• pp.105-111
• /
• 2008

다랑어낚시 및 사용미끼에 따른 어획률을 비교하기 위해, 2006년 9~10월간 태평양 중동부 해역에서 다랑어연승 시험조사가 수행되었다. 일반선형모형(GLM)을 이용하여 재래식 다랑어낚시 1종(J4)와 환형낚시 3종(C15, C16, C18), 미끼 5종(고등어(CM), 전갱이(JM), 밀크피쉬(MF), 정어리(SD), 오징어(SQ)) 및 낚시심도를 나타내는 낚시 순번들이 눈다랑어 어획률(1,000낚시당 마리수)에 미치는 효과를 평가하였다. 총 28회 조업에서 낚시순번 간 눈다랑어 어획률에는 유의한 차이가 인정되었다. GLM분석에서 낚시순번에 의한 눈다랑어 어획률 편차는 33%로 나타났다. 미끼 종류 간 어획률 차이는 그 편차가 2.7%로 적게 나타났고, 낚시형 4종 간 그 차이는 매우 적어 유의하지 않게 나타났다. 따라서, 낚시형 및 미끼 종류의 선택은 다랑어 연승어업에서 눈다랑어 어획률 차이에 영향을 주지 않는 것으로 평가되었으나, 어획수심을 나타내는 낚시순번은 눈다랑어 어획률에 영향을 주는 요인으로 판단되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.55-60
• /
• 2001

Influencing factors on flexural toughness of ring-type fiber reinforced concrete(RSFRC) are investigated. An experiment proceeding ASTM C 78 is peformed to make a comparison between ring-type fibers and double-hook type fibers. Most specimen with ring type fibers have failed by the cone type failure, while discrete hook type fibers have failed by fiber pullout. For the hook-type fiber reinforced concrete(SFRC), the first crack load increases, as the fiber mixing volume increases. Aspect ratio(fiber length/fiber diameter) is critical for hook type fibers, so the flexural toughness increases significantly, as the length of fiber increases. However, for the ring type, the toughness indices Increase as the number of fibers in the specimen increases. Since there is no bond problem between the ring fiber and the concrete matrix, the aspect ratio does not affect the performance of the composite material with the newly developed steel fibers. Influencing factors with respect to flexural toughness RSFRC were observed to be ring diameter, diameter of steel fiber and fiber content.

• 식물분류학회지
• /
• 제44권4호
• /
• pp.257-260
• /
• 2014

제주도 서귀포시 동홍동에서 자라는 것으로 확인된 큰별고사리[Cyclosorus penangianus (Hook.) Copel.]와 제주도 안덕면 광평리 오름 일대에서 발견된 오름깃고사리[Pteris fauriei Hieron.]를 채집하여 국내 미기록종으로 보고하였다. 큰별고사리는 국내에 분포하는 별고사리[C. acuminatus (Houtt.) Nakai], 검은별고사리[C. interruptus (Willd.) H.Ito], 탐라별고사리[C. dentatus (Forssk.) Ching]와 달리 포막이 전혀 없으며, 각 맥과 열편의 만입부에서 유합하는 맥의 수가 4개 이상으로 속내 다른 분류군과 뚜렷하게 구별된다. 오름깃고사리는 봉의꼬리속 다른 분류군과 달리 최종열편이 전연이고, 맥이 가장자리에 닿으며, 엽병 인편의 가장자리가 막질성인 점으로 뚜렷이 구별된다. 미기록 두 분류군에 대해 형질을 기재하고 사진 및 근연 분류군 간의 차이를 검색표로 제시하였다.

• 한국자원식물학회지
• /
• 제5권1호
• /
• pp.11-23
• /
• 1992

The experiments tvere carried out to different temperature which affected growth, yield, proximate and antitumor activity in the Codonopsis lanceolata. Growth of aerial part and subterranean partwere best at 2$0^{\circ}C$ and lower 3$0^{\circ}C$. Components of fat, protein and fiber were best at 3$0^{\circ}C$. Wild C.fonceoforo had higher contents of fat, protein, fiber and ash as compared with cultur'ed C.lanceolataArginin was predominant amino acid in both wild and cultivated C.laceolata No significant differ-ence in the mineral contents was found between the wild root and the cultivated at 30'c inbiotronroom. No minerals difference in the contents was found between the cultivated temperature.The content of elements of inorganic metal differs according to the part. C. lanceolata were subjectedto preliminary antitumer screening test with Sarcoma 180 ascites and screening on V-79 cell. Thisexperiments were conducted in accordance with the total packed cell volume method and cytotoxicity method.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.203-207
• /
• 2003

As the upending is one of the critical steps in the installation of offshore structure, datail procedure of upending operation is studied in the paper. For larger offshore structure installation, launching method is often applied. However after launching, the upending process is to be followed. To ensure successful upending operation, datail process is analysed considering various factors affecting on the operation including reserved buoyancy, free flotation position, seabed clearance, ballast and hook load. To investigate the influence of each factor on the procedure, twelve numerical jacket models with various dimensions are simulated and studied. From the study, it is revealed that the increase of buoyance and decrease of self weight generate a large seabed clearance. The law seabed clearance during flooding creates higher hook load and height. The paper also introduces a guideline for the related structure design and construction with the effects of contribution factors in the upending operation.

• 핵의학기술
• /
• 제28권1호
• /
• pp.81-87
• /
• 2024

Purpose: CA 19-9 is the most widely used tumor marker for the diagnosis of digestive system tumor, especially pancreatic and biliary tract cancer. This study was conducted to improve the result value near reference range by comparing the reagents of CA 19-9 one step method and two step method. In addition, it was intended to establish a standard for selecting reagents. Material and Methods: 120 patients who visited the National Cancer Center in 2023 were selected as subjects for this study. The reagents used in the study were CA 19-9 IRMA kits (Shinjin, Korea) and three types of reagents were compared. Two step method reagent that is currently being used (A), one step method reagent (B) and two step method reagent improved by request (C) were compared and regression analysis was performed on their data. And we also performed recovery test, linearity test and hook effect test for each reagent. Result: There were 46 cases of reagent B in which the concentration value was lower than the result measured in reagent A that was previously used, and 77 cases of reagent C. As a result of regression analysis of reagents A, B, and C, the coefficients of determination of reagents A and B, reagents A and C, and reagents B and C were 0.653, 0.577, and 0.875. In the recovery rate test and the linearity test, the results of all reagents were good, and in the hook effect test, reagent B showed a hook effect at a low value. Conclusion: The improved reagent C appears to have been improved based on the concentration value of reagent B, which the manufacturer judged to be more stable at low concentrations. The hook effect in reagent B can be a fatal reason for disqualification when selecting reagents in general patient samples which high-concentration samples appear frequently. The first improved reagent C will be able to be used once it is confirmed that it has more stability for various concentration values.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제5권2호
• /
• pp.297-304
• /
• 2015

Zeus는 전 세계적으로 널리 퍼진 멀웨어 중 하나이다. 일반적으로 인터넷 상에서 특정 바이너리 파일을 다운 받아 실행함으로써 감염이 되며, 감염이 되면 현재 실행 중인 프로세스들의 특정 Windows API에 후킹을 시도하여, 해당 프로세스가 API를 실행하면 Zeus의 특정 코드를 실행하도록 변조가 되어 개인 정보들이 유출되도록 구성되어 있다. 본 논문에서는 Zeus의 기초 버전인 C&C(Command and Control)방식을 중심으로 Zeus가 어떤 방식으로 Windows API를 후킹하는지, 그리고 어떤 방법으로 후킹이 되었는지 탐지할 수 있는지 제시하여 현대의 P2P Zeus 탐지에 도움이 되고자 한다.