• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.1
• /
• pp.55-62
• /
• 2009

Relatively low cycle performance of a conventional $CO_2$ system is partly due to significant increase in friction loss in the expansion process, since the pressure drop across the expansion device is considerably large compared to a conventional refrigeration cycle. To recover friction loss and increase refrigeration effect by providing isentropic expansion, a rotary vane type expander has been designed. Performance of the designed expander has been investigated by numerical simulation. With the pressure condition of 9 MPa/4.5 MPa and inlet temperature of $35^{\circ}C$, volumetric, isentropic, and mechanical efficiencies of the expander are calculated to be 58.1%, 101.1%, and 78.8%, respectively, resulting in total expander efficiency of 46.3%. With this expander, COP of a $CO_2$ refrigeration cycle is estimated to be improved by about 14%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2009

Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.434-442
• /
• 2006

In a two-stage compression $CO_2$ transcritical cycle, application of a scroll expander-compressor unit has been considered in order to improve the cycle COP. For both expander and 1st stage compressor, scroll wrap profile which was originally designed for a R410A air-conditioning cycle mechanism was used with minor modifications: wrap height and involute end angle were adjusted for required displacement volume and built-in volume ratio. For pressure condition of 10 Mpa/3.5 MPa and expander inlet temperature of $35^{\circ}C$, 25% improvement in COP was obtained by using expander-compressor unit. As evaporator pressure increased, COP improvement was lowered mainly due to decreasing compressor peformance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.4
• /
• pp.208-215
• /
• 2013

An experimental study of an ORC (Organic Rankine Cycle) system has been performed for small-scale applications in the range of a few kW for low-grade-recovery heat sources. The ORC system was equipped with a scroll expander. Experimental tests were carried out using this system, and showed good performance and reliability for the small-scale system. The effects of various operating conditions were selected as the main parameters for the performance of ORC system, such as the expander speeds and mass flow rates of R-134a for expander inlet temperatures ranging from $100^{\circ}C$ to $190^{\circ}C$, as well as the thermal power, thermal efficiency, expansion efficiency, and volumetric efficiency.

• Archives of Plastic Surgery
• /
• v.45 no.5
• /
• pp.484-489
• /
• 2018

Large and ptotic breast reconstruction in patients who are not candidates for a transverse rectus abdominalis myocutaneous flap and revision surgery for the contralateral breast remains challenging. We developed a novel breast reconstruction technique using a latissimus dorsi myocutaneous (LD m-c) flap set at the posterior aspect of the reconstructed breast, combined with an anatomical silicone breast implant (SBI), following tissue expander surgery. We performed the proposed technique in four patients, in whom the weight of the resected tissue during mastectomy was >500 g and the depth of the inframammary fold (IMF) was >3 cm. After over-expansion of the lower portion of the skin envelope by a tissue expander, the LD m-c flap was transferred to cover the lower portion of the breast defect and to achieve a ptotic contour, with the skin paddle set at the posterior aspect of the reconstructed breast. An SBI was then placed in the rest of the breast defect after setting the LD m-c flap. No major complications were observed during the follow-up period. The proposed technique resulted in symmetrical and aesthetically satisfactory breasts with deep IMFs, which allowed proper fitting of the brassiere, following large and ptotic breast reconstruction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.248-256
• /
• 2003

Two experiments were conducted to determine the effects of expander processing and enzyme supplementation of wheat-based diets on growth performance and nutrient digestibility in finishing pigs. For Exp. 1, 60 finishing pigs (average initial BW of 49.5 kg) were fed meal, standard pellets and expanded pellets in a 70 d growth assay. From 49.5 to 79.0 kg, 79.0 to 111.8 kg, and overall (49.5 to 111.8 kg), ADG and ADFI were not affected by pelleting or standard vs expander conditioning (p>0.22). However, from 49.5 to 79.0 kg, pigs fed pellets have greater gain/feed than pigs fed mash (p<0.04), and pigs fed expanded pellets tended to have greater (p<0.10) gain/feed than pigs fed standard pellets. Overall (i.e. from 49.5 to 111.8 kg), gain/feed (p<0.02) and apparent fecal digestibilities of DM (p<0.001) and N (p<0.02) were improved by pelleting the diets. Also, expander processing further improved gain/feed (p<0.06) and digestibility of DM (p<0.04) compared to standard steam conditioning. Scores for keratinization (p<0.002) and ulceration (p<0.003) of the stomach were increased by pelleting, but the mean scores for the various treatments ranged only from 0.05 to 1.08 (i.e., low to mild keratosis and ulceration). For Exp. 2, 80 pigs (average initial BW of 54.1 kg) were fed mash and pellets (standard or expander) without and with xylanase. The enzyme was added to supply 4,000 units of xylanase activity/kg of diet. Adding xylanase to the mash diet improved gain/feed from 90.7 to 115.9 kg (p<0.04) of the growth assay and digestibility of DM (p<0.05) on d 39. However, in pelleted diets, adding the enzyme did not improve growth performance or digestibility of nutrients. Pelleting tended to increase scores for ulceration (p<0.06), and enzyme supplementation decreased stomach keratinization scores for pigs fed the standard pellets (p<0.01). However, as in Exp. 1, the mean scores for all treatment groups were quiet low (i.e., ranging from normal to mild). In conclusion, pelleting improved efficiency of growth, but additional benefits from expander conditioning were observed only in Exp. 1. Finally, xylanase tended to improve growth performance and nutrient digestibility, only in pigs fed mash diets but not in pigs fed pellets.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.325-332
• /
• 2005

This paper addresses the development of a scroll expander for power generation from relatively low temperature steam source. It has a double-sided orbiting scroll member so that no thrust bearing is needed to support the base plate of the orbiting scroll. Three power transmission shafts are placed at the periphery of the orbiting scroll base plate, and these shafts can also function as anti-rotation devices. Final output is obtained from the main central shaft engaged with the three power transmission shafts through gear assembly. The clearance between the fixed and orbiting scroll elements was estimated by comparing measurement of the mass flow rate with calculation results of a computer simulation. Due to large clearance, the expander total and volumetric efficiencies were measured to be $34\%\;and\;43\%$, respectively. It has been shown through the computer simulation that the total and volumetric efficiencies could be improved to $65\%\;and\;83\%$, respectively, if the current clearance is reduced by half.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1144-1149
• /
• 2020

The magnetic valve of the breast tissue expander generates imaging artifacts during MRI examination, so MRI examination is limited. To evaluate the effect of imaging artifacts on the diagnosis area for patients with breast tissue expander who need MRI examination. Imaging artifacts were measured using self-made phantoms and actual clinical conditions. Imaging artifacts were measured differently depending on the environment of 1.5 Tesla and 3.0 Tesla, and the effects of imaging artifacts were less in the C-spine and L-spine tests. If MRI due to breast cancer metastasis is absolutely necessary, head & neck examination and L-spine can be examined mainly at 1.5 Tesla, but some sequences may cause distortion due to image artifacts. In terms of safety, MRI scans of patients with breast tissue expanders can be performed conditionally at 1.5T, avoiding 3.0T.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.565-572
• /
• 1999

Two experiments were conducted to determine the effects of conditioning (conventional vs expander) corn- and sorghum-based diets on production traits for lactating sows and finishing pigs. In Exp. 1, one hundred sixty-eight sows (parity 1-4, PIC line C15) were fed the corn or sorghum grain diets as a meal, standard (steam) conditioned pellets, or expanded pellets to give a $2{\times}3$ factorial arrangement of treatments. Pellet durability index (PDD was similar for the sorghum- vs corn-based diets, but increased when diets were expanded pellets for both corn- and sorghum-based diets. The corn-based meal diet supported 3.3% greater litter weight gain than the sorghum-based meal diet (44.0 kg vs 42.8 kg). However, the advantage for the corn-based diet disappeared with expander processing (ie., sows fed the sorghum-based diet responded more to diets processed with the alternative processing technology). Sow weight change during lactation was similar (p>0.15) among treatments, although average daily feed intake tended to be greater (p<0.09) for the sows fed sorghum. For Exp. 2, a total of 71 barrows (average initial weight of 58.0 kg) were used in a growth assay to determine the effects of feeding com- and sorghum-based diets, as meal or pellets, after processing with a conventional steam conditioner or an expander (high-shear) conditioner. PDI was not different for the sorghum- vs corn-based diets, but increased from 84 to 95% with expander conditioning compared to conventional steam conditioning. Rate and efficiency of gain, and carcass leanness were similar for pigs fed sorghum and corn (p>0.15). Efficiency of gain was greater (p<0.04) for pigs fed the pelleted (356 g/kg) diets compared to those given the meal (348 g/kg) diets. However, efficiencies of gain were similar (p>0.11) for pigs fed the conventional- and expander-conditioned diets. Pelleting increased (p<0.01) the incidence and severity of stomach lesions regardless of grain type. In conclusion, corn-based meal diet resulted in a greater litter weight gain than the sorghum-based meal diet. However, that advantage disappeared when the diets were expanded and pelleted. Finishing pigs fed pelleted diets were more efficient than those fed meal diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.558-564
• /
• 1999

A series of experiments were conducted to determine the effects of standard (ST), long-term (LT), and expander (EX) conditioners on nutritional value of phase-three nursery and finishing swine diets. In Exp. 1, 180 pigs (average initial BW of 11.7 kg) were fed com-soybean meal based diets (1.3% lysine) during a 28 d growth assay. Gain/feed was improved (p<0.004) with pelleting and pellet durability index (PDI) increased with degree of conditioning (LT>ST). However, there was no advantage for LT vs ST conditioning in rate or efficiency of gain (p>0.5). In Exp. 2, 180 pigs (average initial BW of 10.4 kg) were fed con-soybean meal based diets (0.9% lysine) during a 28 d growth assay, Pelleted diets tended to support greater ADG (p<0.08) and gain/feed (p<0.002) with no marked advantage from EX vs ST conditioning. In Exp 3, a total of 70 barrows (average initial BW of 54 kg) was used in a growth assay to determine the effects of feeding a com-soybean meal based diet processed with a standard (ST) steam conditioner, a long-term (LT) steam conditioner, and an expander (EX) conditioner. The conditioned diets were fed as mash (M) or pellets (P) to give a $2{\times}3$ factorial plus a meal control. PDI increased with degree of conditioning (EX>LT>ST). There was a trend (p<0.07) for greater ADG in pigs fed diets that had been thermally conditioned. Also, there was a general advantage in gain/feed with pelleting (p<0.04), but this advantage was pronounced only with standard conditioning. Indeed, the greatest gain/feed was observed for pigs fed the expander treatments (p<0.03) and the expander mash was used as efficiently as the expander pellets. There was no difference in backfat thickness among pigs fed the treatments (p>0.3). but the more extreme the processing technique. the greater the incidence and severity of stomach lesions (p<0.04). These results suggest maximum rate and efficiency of growth with pelleting after standard steam conditioning or simply feeding an expanded mash.