• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8C
• /
• pp.795-800
• /
• 2006

In this paper, the minimum mean square error(MSE) convergence of the RBF equalizer is evaluated and compared with the linear equalizer based on the theoretical minimum MSE. The basic idea of comparing these two equalizers comes from the fact that the relationship between the hidden and output layers in the RBF equalizer is also linear. As extensive studies of this research, various channel models are selected, which include linearly separable channel, slightly distorted channel, and severely distorted channel models. In this work, the theoretical minimum MSE for both RBF and linear equalizers were computed, compared and the sensitivity of minimum MSE due to RBF center spreads was analyzed. It was found that RBF based equalizer always produced lower minimum MSE than linear equalizer, and that the minimum MSE value of RBF equalizer was obtained with the center spread which is relatively higher(approximately 2 to 10 times more) than variance of AWGN. This work provides an analytical framework for the practical training of RBF equalizer system.

• Transactions of Materials Processing
• /
• v.25 no.4
• /
• pp.242-247
• /
• 2016

CFD simulation with FlowVision^® is used to evaluate the capability of cooling channel in hot press forming dies. Two different types of cooling channels, dry drilled and pocket types are considered for comparison. Two different approaches for simulating cooling channel are considered. One is single-phase velocity calculation for coolant only and the other is multiphase thermal and velocity calculation for die, blank and coolant all together. Both approaches show better cooling performance in pocket type cooling channel. Also both approaches show their own effectiveness in designing cooling channel of hot press forming dies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.751-755
• /
• 2003

This paper proposes the Μ-algorithm for overall efficiency rise with complexity decrease in magnetic recording channel PRML system. The if-algorithm is decoding method that omits some parts of state numbers. So it can decrease system's complexity that is increased according to channel density. This paper determines PRML channel model that shows good capacity for each channel density, and proposes the most suitable PRML system model with the relation of efficiency and complexity.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1351-1361
• /
• 1999

The wide spread of multimedia system demands a large area viewing display device which can inform a message to many people in open area. This paper is about the design of a large area viewing LED panel control system. The control system runs on 16 bit microprocessor MC68EC000 and has following functions: 16 line clock and time, 2 channel priority interrupt, 2 channel direct memory access, 2 channel 12 bit clock and timer, 2 channel infrared remocon receiver, 2 channel RS-232C with 16 byte FIFO, IBM PC/AT compatible keyboard interface, ISA bus, battery backuped real time clock, battery backuped 256 byte SRAM and watch dog timer. The core circuits are implemented to ASIC, considering lower cost, higher reliability, higher performance, smaller dimension, and lower power consumption. This is verified by simulation and fabricated in 0.6 um CMOS SOG processes. The total gate count is 39,083 and the clock frequency is 48 MGz. The fabricated ASIC is mounted on test board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1633-1641
• /
• 2004

In satellite digital broadcasting and satellite internet, severe burst errors occur in the high-speed return channel from the satellite to mobiles. In this paper, we analyze the performance of the forward error correction (FEC) coding method in the Rayleigh fading return channel. We first investigate the channel model of Loo, LutB, Vucetic and Corazza. We then compare the performance of the convolutional, Reed-Solomon (RS), convolution-RS concatenation, and Turbo codes in rayleigh fading channel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.101-104
• /
• 2004

We have fabricated a channel of superconducting flux flow transistor(SFFT) using the voltage-biased atomic force microscope(AFM) TiO tip and performed numerical simulations for the SFFT controlled by the magnetic field with a control current. The critical current density in a channel of the fabricated SFFT was decreased with the applied current by a control line. By comparing the measured with theoretical results, we showed a possibility of fabrication of an SFFT with a nano-channel using AFM anodization process technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.1-7
• /
• 2008

In this work, a two dimensional, self-consistent Poisson-$Schr{\ddot{o}}dinger$ solver has been implemented to study C-V characteristics in nanometer scale MuGFETs with considering quantum effects. The quantum-mechanical effects on gate-channel capacitance for different device dimension and gate configurations of nanometer scale MuGFETs have been analyzed. It has been found that 4he gate-channel capacitance per unit gate area is increased as the device dimension decreases. For different gate configurations, the gate-channel capacitance is decreased with increase of effective gate number. Those resu1ts have been explained by the distribution profile of electron concentration in the silicon surface and inversion capacitance. The length of inversion-layer centroid has been calculated from inversion capacitance with device dimension and gate configurations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.646-652
• /
• 2013

EU's Galileo project is a market-based GNSS (Global Navigation Satellite System) that is under development. It is expected that Galileo will provide the positioning services based on new technologies in 2020s. Because Galileo E1 signal for OS (Open Service) shares the same center frequency with GPS L1 C/A signal, CBOC (Composite Binary Offset Carrier) modulation scheme is used in the E1 signal to guarantee interoperability between two systems. With E1 signal consisting of a data channel and a pilot channel at the same frequency band, there exist several options in designing signal acquisition for Assisted-Galileo receivers. Furthermore, compared to SNR worksheet of Assisted-GPS, some factors should be examined in Assisted-Galileo due to different correlation profile and code length of E1 signal. This paper presents SNR worksheets of Galileo E1 signals in E1-B and E1-C channel. Three implementation losses that are quite different from GPS are mainly analyzed in establishing SNR worksheets. In the worksheet, hybrid long integration of 1.5s is considered to acquire weak signal less than -150dBm. Simulation results show that the final SNR of E1-B signal with -150dBm is 19.4dB and that of E1-C signal is 25.2dB. Comparison of relative computation shows that E1-B channel is more profitable to acquire the strongest signal in weak signal environment. With information from the first satellite signal acquisition, fast acquisition of the weak signal around -155dBm can be performed with E1-C signal in the subsequent satellites.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.692-698
• /
• 1999

In this paper, we proposed the channel assignment scheme for the CDMA(Code Division Multiple Access) cellular system using power allocation concept. Also, the performance of the proposed scheme was analyzed and it was compared with the channel assignment scheme using the fixed power allocation method in the CDMA cellular system. The proposed scheme allocates the power adaptively in according to the traffic loads and the traffic distribution pattern of neighbor cells in the forward link. We found that total call blocking probability (Pr) is more dependent on blocking probability($P_B$) than outage probability (Po) under physical number of channels ($C_{th}$)=30. Pr(Call Blocking Probability) is dependent on $P_B$(Blocking Probability) and Po(Outage Probability) at the same ratio under $C_{th}$=32, in which case P$P_{TA}$(blocking probability for the adaptive power allocation) is greater than $P_{TF}$(blocking probability for the fixed power allocation) about 6%.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.91-97
• /
• 1995

This paper describes the implementation of a multi-channel audio codec for HETV. This codec has the features of the 3/2-stereo plus low frequency enhancement, downward compatibility with the smaller number of channels, backward compatibility with the existing 2/0-stereo system(MPEG-1 audio), and multilingual capability. The encoder of this codec consists of 6-channel analog audio input part with the sampling rate of 48 kHz, 4-channel digital audio input part and three TMS320C40 /DSPs. The encoder implements multi-channel audio compression using a human perceptual psychoacoustic model, and has the bit rate reduction to 384 kbit/s without impairment of subjective quality. The decoder consists of 6-channel analog audio output part, 4-channel digital audio output part, and two TMS320C40 DSPs for a decoding procedure. The decoder analyzes the bit stream received with bit rate of 384 kbit/s from the encoder and reproduces the multi-channel audio signals for analog and digital outputs. The multi-processing of this audio codec using multiple DSPs is ensured by high speed transfer of date between DSPs through coordinating communication port activities with DMA coprocessors. Finally, some technical considerations are suggested to realize the problem of real-time operation, which are found out through the implementation of this codec using the MPEG-2 layer II sudio coding algorithm and the use of the hardware architecture with commercial multiple DSPs.