• 한국진공학회지
• /
• 제17권5호
• /
• pp.448-454
• /
• 2008

본 논문의 목적은 진공증착법을 이용한 $\beta$-PVDF($\beta$-Polyvinylidene fluoride) 유기 박막의 제조와 제조된 유기 박막의 압전 특성을 연구하는데 있다. 진공 증착은 증발원 온도 $270^{\circ}C$, 인가 전계 142.4kV/cm, 진공도 $2.0{\times}10^{-5}Torr$에서 실시하였다. 기판 온도의 증가에 따라서 $\beta$형태의 PVDF 함유량은 72%에서 95.5%로 증가함을 알 수 있었다. 힘 모우멘트를 $1.372{\times}10^{-5}N{\cdot}m$에서 $39.2{\times}10^{-5}N{\cdot}m$로 변화시킨 응답특성의 경우, 출력전압은 1.39V에서 7.04V로 증가하였다.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.48-59
• /
• 2022

A V2X system can be a candidate as a means to increase the stability of autonomous vehicles. In particular, in order to implement a Level 4 or higher autonomous driving system, the application of the V2X system is essential. Wireless communication technologies applicable to the V2X system include WAVE and C-V2X. Currently, the V2X service most used by autonomous driving systems is a service that provides signal phase and timing information and since real-time characteristic is a very important, verification of this service must be done. In this paper, we measured the time delay characteristics for providing signal phase and timing information using WAVE and LTE communication, and proposed a TOD-based signal phase and timing information generation method without using V2X communication system. To analyze the time delay characteristics, RTT (Round Trip Time) was measured as a result of the measurement. Average RTT using WAVE communication was 5.84ms and was 104.15ms with LTE communication. As a result of measuring the error between the signal phase and timing information generated based on TOD and the actual traffic light state, it was measured to be -0.284~3.784sec.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.1-7
• /
• 2006

본 논문에서는 자동 온도 보상 기법을 사용한 on-chip CMOS 내부 전원 전압 발생기를 제안하였다. PMOSFET의 경우, 게이트 바이어스 저압에 따라 온도의 변화에 대한 소오스-드레인간 전류 특성이 달라진다. 제안된 내부 전원 전압 발생기는 서로 다른 게이트 바이어스 전압에 두 개의 PMOSFET를 놓고, 이의 온도에 대한 서로 상이한 소오스-드레인간 전류 특성을 이용하여 내부 전원 전압 발생기 전체의 온도 의존도를 줄였다. 제안된 회로는 동부-아남 $0.18{\mu}m$ 공정을 이용하여 제작되었으며 측정 결과로 내부 전원 전압은 $-10^{\circ}C{\sim}100^{\circ}C$의 범위에서 $-0.49mV/^{\circ}C$의 온도 의존도를 보였으며 $2.2V{\sim}4.0V$의 동작 범위에서 외부 전압에 대하여 내부 전원 전압의 변화는 6mV/V를 나타내었다. 전체 전류소모는 $1.1{\mu}A@2.5V$로 저전력을 구현할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1090-1095
• /
• 2008

The SiOCH films that low dielectric interlayer dielectric materials were deposited on p-type Si(100) substrates through the dissociation of BTMSM precursors with oxygen gas by using PECVD method. BTMSM precursor was introduced with the flow rates from 42 sccm to 60 sccm by 2 sccm step in the constant flow rate of 60 sccm $O_2$. SiOCH thin films were annealed at $450^{\circ}C$ for 30 minutes. The electrical property of SiOCH thin films was studied by MIS, Al/SiOCH/p-Si(100), structure. Annealed samples showed even greater reductions of the maximum capacitance and the dielectric constant of the SiOCH samples, owing to reductions of surface charge density. we confirmed this result with derivative of C-V characteristic, leakage current density. The maximum capacitance and leakage current density were respectively decreased about 4 pF, 60% after annealing. The average of low-k value is approximatly 2.07 after annealing.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.327-331
• /
• 2009

Nano-porous $TiO_2$ powder was fabricated using Acetylene black, applied photo voltaic device based on the Dye-sensitized Solar Cells (DSCs) was investigated experimentally. $TiO_2$-powder was fabricated using Ti-isopropoxide and 2-propanol by sol-gel combustion method. For cases of variable Acetylene black, characteristic of porosity, size of particle and crystallite of obtained $TiO_2$ nano-powder was investigated. The photovoltaic efficiency of the prepared DSCs was measured using $TiO_2$ film which prepared on each different heat treatment temperature($400^{\circ}C{\sim}700^{\circ}C$) with paste of $TiO_2$ powder. The porosity and size of particle of $TiO_2$ powder made with Acetylene black 0.4g was influenced significantly effect to DSCs characteristic. Heat treatment at $500^{\circ}C$ makes the better photovoltaic efficiency which 5.02%($J_{sc}=11.79mA/cm^2$, $V_{oc}=0.73V$, ff=0.58). The sol-gel combustion method was useful to DSCs fabrication.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.322-326
• /
• 2009

In this work, nanoporous $TiO_2$ powder was fabricated using Ketjen black, and applied in photovoltaic device based on the Dye-sensitized Solar Cells (DSCs). $TiO_2$ powder was fabricated using Ti-isopropoxide and 2-propanol by sol-gel combustion method. For added $0{\sim}2g$ variable of Ketjen black, characteristic of porosity, size of particle and crystallite of obtained $TiO_2$ nano powder was investigated. The photovoltaic efficiency of the prepared DSCs was measured using $TiO_2$ film which prepared on each different heat treatment temperature($100^{\circ}C{\sim}600^{\circ}C$) with paste of $TiO_2$ powder. The porosity and size in particle of $TiO_2$ powder made with Ketjen black Ig was influenced significantly effect to DSCs characteristic. Heat treatment at $500^{\circ}C$ makes the better photovoltaic efficiency which around 6.11%($J_{sc}=13.35mA/cm^2$, $V_{oc}=0.73V$, ff=0.63). The sol-gel combustion method was useful to DSCs fabrication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.291-294
• /
• 2003

The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

• 전기전자학회논문지
• /
• 제28권2호
• /
• pp.131-135
• /
• 2024

본 연구에서는 전력설비의 전력선에 탈부착이 용이하도록 전류계(CT) 방식의 비접촉식 부분방전 측정용 센서를 자체 개발하고, 그 특성평가 결과에 대하여 논하였다. 자체 제작한 HFCT센서의 주파수 응답특성이 20[kHz]에서 20[MHz]까지 측정 가능함을 보였으며, 정극성 방향으로 배치한 경우의 평균감도가 0.308[mV/pC], 부극성 방향으로 배치한 경우는 0.459[mV/pC]로서 부극성으로 배치한 경우가 정극성으로 배치한 경우보다 감도특성이 우수함을 보였다. 실제 부분방전 발생 및 특성측정 실험을 통하여 침전극 끝단에서 매우 미소한 코로나 기중방전이 시작되는 펄스 신호를 측정하는 것이 가능하므로 전력설비에서 발생될 수 있는 다양한 형태의 부분방전을 충분히 측정가능할 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.88-91
• /
• 2000

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method. The crystallinity of SCT thin films is increased with increase of substrate temperature in the temperature range of 200~500$[^{\circ}C]$. V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature. The conduction mechanism of the SCT thin films observed in the temperature range of 25~100$[^{\circ}C]$ can be divided into four characteristic regions with different mechanism by the increasing current.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1008-1012
• /
• 1996

I-V, C-V characteristics of inverted staggered type hydrogenerated amorphous silicon thin film transistor(a-Si:H TFT) was studied and experimentally verified. The results show that the log-log plot of drain current increased by voltage increase. The saturated drain current of DC output characteristics increased at a fixed gate voltage. According to the increase of gate voltage, activation energy of electron and the increasing width of Id at high voltage were decreased. Id saturation current saturated at high Vd over 4.5V, Vg-ld hysteresis characteristic curves occurred between -15V and 15V of Vg. Hysteresis current decreased at low voltage of -15V and increased at high voltage of 15V.