• Applied Biological Chemistry
• /
• 제41권1호
• /
• pp.110-117
• /
• 1998

Ghana산 cacao bean으로부터 acetone으로 추출하고 Sephadex LH-20, MCI-gel CHP-20, Bondapak $C_{18}$ 및 Fuji gel ODS $G_3$, chromatography 등을 이용하여 7종의 polyphenol 화합물(compound 1 - compound 7)을 분리 정제하였고, 이들 화합물의 화학구조를 $^1H-NMR$, $^{13}C-NMR$, IR 및 MS를 사용하여 검색하였고 아울러 angiotensin converting enzyme(ACE) 저해효과를 조사 검토하였다. 분리정제한 7종의 polyphenol 화합물의 구조를 분석한 결과, compound 1: [(+)-catechin], compound 2: [(-)-epicatechin], compound 3: [procyanidin B-1, (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(+)-catechin], compound 4 : [procyanidin B-2, (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin], compound 5: [procyanidin B-7, (-)-epicatechin-$(4{\beta}{\rightarrow}6)$-(+)-catechin], compound 6 : (procyanidin B-2,3,3'-O-digallate) 및 compound 7: [cinnamtannin A-2, (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin]임을 동정하였다. ACE의 저해효과는 procyanidin B-2,3,3'-O-digallate (compound 6)가 $100\;{\um}M$에서 94.6%로 매우 우수하였으며, (+)-catechin (compound 1), (-)-epicate -chin (compound 2), procyanidin B류 (compound 3, 4, 5) 및 cinnamtannin A-2 (compound 7)도 각각 67.9%, 61.9%, 88.6%, 82.5%, 72.2% 및 82.3%의 비교적 우수한 저해효과가 있었다. 아울러 결합방식에서는 $4{\beta}{\rightarrow}6$보다 $4{\beta}{\rightarrow}8$의 결합방식이, 그리고 procyanidin 류에서는 gallate를 갖는 물질이 이를 함유하지 많은 물질보다 더욱 높은 ACE의 저해효과를 나타내었으며, 또한 hydroxyl 기가 많을수록 효소 저해효과도 증가하는 것으로 나타났다. 이와 같은 결과는 chocolate의 주원료인 cacao bean의 polyphenol 성분 또한 녹차 등에서 볼 수 있는 생리활성효과에 손색없는 것으로 판단되고, 이러한 기능성에 기초하여 chocolate, 음료 등의 식품이나 의약품의 기능성 소재로서의 산업적 응용 가능성이 높은 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.56-64
• /
• 2009

본 연구의 목적은 콩기름을 오존 산화 처리하여 기능기를 도입하고 이를 바탕으로 친환경 목재 접착제를 개발하는 것이다. 시판용 콩기름을 시간당 약 7.13 g의 오존을 발생시켜 15분, 30분, 60분, 120분간 오존산화 처리한 후 FT-IR, $^1H$-NMR, MALDI-TOF MS, GC/MS 측정하여 구조변화를 분석하였다. 기기분석 결과 오존산화처리에 의하여 콩기름의 불포화 이중결합이 개열되어 카르복실기 또는 알데하이드기가 생성됨을 확인하였다. 오존산화콩기름 변성 pMDI 접착제의 접착력은 오존처리 정도와 pMDI의 혼합비율에 따라 달라지며, KS F 3101 보통합판기준 내수 접착강도를 안정적으로 만족 시키는 조건은 오존산화 처리시간 30분~60분, pMDI와 1:1로 혼합한 경우이며, 준내수 접착강도를 만족시키는 범위는 오존산화 처리시간 30분~60분, pMDI의 혼합비 0.5이상, 상태접착강도를 만족시키는 범위는 오존산화 처리시간 15분~60분, pMDI의 혼합비 0.25 이상임을 알 수 있었다. 위의 실험결과를 종합하여 볼 때, 오존산화 처리한 식용유는 오존처리시간 및 pMDI의 혼합비율을 조절하면 상태접착력 뿐만 아니라 내수접착력이 요구되는 목질복합재료 제조용 접착제 제조가 가능함을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• 폴리머
• /
• 제33권4호
• /
• pp.319-325
• /
• 2009

편광필름용 점착제를 합성하기 위해 아크릴 단량체를 사용하여 용액중합이 수행되었다. 사용된 아크릴 단량체는 2-ethylhexylacrylate, butylacrylate, acrylic acid였으며, 비율은 점착제의 유리전이온도 $-40^{\circ}C$에 맞추어 2-ethylhexylacrylate: butylacrylate: acrylic acid=25:50:3.5로 하였다. 중합된 점착제에 커플링제를 1 wt% 첨가하였을 때 점착제의 광투과율이 매우 증가하였다. 이러한 현상은 커플링제의 Si-O 결합이 액정셀에 대한 점착력을 향상시킨 결과임을 알 수 있었다. 가교제를 단량체 대비 0.5, 1.0, 1.5 wt% 첨가하였을 매 가교제의 함량이 증가할수록 초기점착력은 감소하고 응집력은 증가하였다. 접촉각 분석에서 가교제의 함량이 증가할수록 표면에너지가 커져 접촉각이 감소하였다. 내열성 측정에서 가교제의 증가나 온도변화에 관계없이 아크릴 점착제는 우수한 내열성을 보였으며 절단면의 관찰에서 가교제의 함량이 증가할수록 절단면이 매끄럽고 깨끗하였다. 종합적으로 점착제의 초기점착력, 응집력, 표면에너지, 절단면의 상태 등을 고려하여 적정 가교제의 투입량을 1.0 wt%로 확정하였다.

• 폴리머
• /
• 제33권2호
• /
• pp.169-174
• /
• 2009

Poly(ethylene glycol)(PEG)이 콘택트렌즈에 미치는 영향을 조사하기 위하여 PEG가 도입된 실리콘 수화젤 렌즈를 제조하고 특성을 평가하였다. 실리콘 수화젤 렌즈는 methacryloxypropyl tris(trimethylsiloxy) silane(TRIS), methyl methacrylate(MMA), N,N'-dimethyl acrylamide(DMA) 등과 PEG 함유 단량체인 poly(ethylene glycol) methyl ether methacrylate(PEG-MEM)를 공중합하여 제조하였다. 특성평가는 Fourier transform infrared spectroscopy(FT-IR), electron spectroscopy of chemical analysis(ESCA), scanning electron microscopy(SEM) 등과 물 흡수도, 물 접촉각, 광투과도, 인장강도 등을 평가하였고 단백질 흡착 실험을 행하였다. FT-IR 및 ESCA 분석결과 C-O 결합피크의 증가를 보여 PEG 도입을 확인하였고 SEM 분석결과 상분리 현상은 나타나지 않았다. 물흡수도는 PEG-MEM의 도입에 따라 1차적으로 증가하였고 물 접촉각 및 광투과도는 감소하는 현상을 나타내었다. 단백질흡착 실험결과, PEG의 도입에 따라 눈물 속에 있는 단백질인 albumin, lysozyme, $\gamma$-globulin 등의 흡착이 감소하는 현상을 나타내었다. 또한 PEG 분자량의 증가에 따라 흡착되는 단백질의 양이 감소하는 것을 확인할 수 있었다. 인공눈물을 사용한 단백질 흡착실험에서도 PEG의 도입에 따라 단백질 흡착이 감소하는 현상을 나타내었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• 대한화학회지
• /
• 제55권6호
• /
• pp.919-925
• /
• 2011

A new series of manganese(II), iron(III) and cobalt(III) complexes of 14-membered macrocyclic ligand, (3,6,10,13,16,19-hexaazabicyclo[6.6.6]icosane-1,8-diamine) have been prepared and characterized by elemental analyses, IR, UV-VIS, $^1H$- and $^{13}C$- NMR spectra, magnetic susceptibilities, conductivities, and ESR measurements. Molar conductance measurements in DMF solution indicate that the complexes are electrolytes. The ESR spectrum for cobalt(III) complex in $CD_3OD+10%D_2O$ after exposure to $^{60}Co-{\gamma}$-rays at 77 K using a 0.2217 M rad $h^{-1}$ vicrad source showed $g_{\perp}$ > $g_{\parallel}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_z2$ orbital with covalent bond character. In this case, the ligand hyperfine tensors are nearly collinear with ${\gamma}$-tensors, so there is no major tendency to bend. Therefore, little extra delocalization via the ring lobe of the $dz^2$ orbital occurs. However, the ESR spectrum in solid state after exposure to $^{60}Co-{\gamma}$-rays at 77 K showed $g_{\parallel}$ > $g_{\perp}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_x2_{-y}2$ ground state as the resulting spectrum contains a large number of randomly oriented molecules provided that, the principle directions of g and A tensors. Manganese (II) complex 2, $[H_{12}LMn]Cl_4.2H_2O$, showed six isotropic lines characteristic to an unpaired electron interacting with a nucleus of spin 5/2, however, iron(III) complex 3, $[H_{12}LFe]Cl_5.H_2O$, showed spectrum of a high spin $^{57}Fe$ (I=1/2), $d^5$ configuration. The geometry of these complexes was supported by elemental analyses, IR, electronic and ESR spectral studies. Complex 1 showed exploitation in reducing the amount of electron adducts formed in DNA during irradiation with low radiation products.

• 대한소아치과학회지
• /
• 제29권4호
• /
• pp.592-599
• /
• 2002

광중합형 복합레진 및 다양한 레진 접착제는 최근 소아의 유치 수복에 사용이 증가하고 있다. 본 연구는 유치의 복합레진 수복 시 중합방법과 접착제에 따른 미세누출의 차이를 실험적으로 관찰하고자 하였다. 탈락기에 있는 건전한 유전치 150개의 순면에 직경 1.6mm, 깊이 1.6mm의 와동을 형성하였다. 와동의 충전재로써 1종의 복합레진, 1종의 콤포머, 4종의 레진 접착제를 사용하였다. 중합 광원은 3종을 사용하였다. 충전이 완료된 각 시편은 Sof-Lex 폴리싱 디스크로 표면을 연마한 후 $5^{\circ}C$와 $55^{\circ}C$에 각 30초씩 계류시켜 1,000회 열순환하고 2% methylene blue 수용액에 넣어 색소를 침투시킨 후 저속 diamond cutter($Isomet^{TM}$, Buehler, USA)를 이용하여 순면을 근원심으로 절단하였다. 각 재료별 미세누출의 정도를 관찰하여 다음과 같은 결과를 얻었다. 1. 충전재 및 광중합 방법에 따른 미세누출을 측정한 결과, 콤포머를 사용한 5군에서 충전방법과 관계없이 가장 작았고, Clearfil SE bond를 Optilux 501로 중합한 군에서 가장 컸으나 통계적으로 유의한 차이는 아니었다(P>0.05). 2. 충전재에 따른 미세누출을 측정한 결과, 콤포머를 충전한 5군에서 $1{\sim}4$군의 복합레진 충전군에 비해 더 작은 미세누출을 보였다(P<0.05). 3. 광중합 방법에 따른 미세누출을 측정한 결과, Optilux 501을 사용한 군에서 가장 작았고, Flipo를 사용한 군에서 가장 컸으나 통계적으로 유의한 차이는 아니었다(P>0.05).

• Bulletin of the Korean Chemical Society
• /
• 제29권6호
• /
• pp.1157-1161
• /
• 2008

2,6-Dinitrophenol (2,6-DNP) complexes with lanthanide series including yttrium (except Pm, Tm, and Lu) have been synthesized and their crystal structures have been analyzed by X-ray diffraction methods. Singlecrystal X-ray structure determinations have been performed at 296 K on the Ce$\rightarrow$Yb species and shown them to be isomorphous, triclinic, P1, a = 8.6558(2)$\rightarrow$8.5605(3) $\AA$, b = 11.8813(3)$\rightarrow$11.6611(4) $\AA$, c = 13.9650(3) $\rightarrow$13.8341(5) $\AA$, $\alpha$ = 73.785(1)$\rightarrow$73.531(2)o, $\beta$ = 74.730(1)→74.903(2)${^{\circ}}$, $\gamma$ = 69.124(1)→ 69.670 $(2){^{\circ}}$, V = 1266.86(5)→1221.53(7) $$\AA^{3}$$, Z = 2. In Ln(III) complexes, three 2,6-DNP ligands coordinate directly to the metal ion in the bidentate fashion. The nine coordinated Ln(III) ion forms slightly distorted tri-capped trigonal prism. There are no water molecules in the crystal lattice. The dependences of metal to ligand bond lengths are discussed on the atomic number of lanthanide elements. The thermal properties of lanthanide complexes of 2,6- DNP have also studied by TG-DTG and DSC thermal analysis methods.

• Parasites, Hosts and Diseases
• /
• 제55권4호
• /
• pp.451-455
• /
• 2017

Echinostoma cinetorchis is an oriental intestinal fluke causing significant pathological damage to the small intestine. The aim of this study was to determine a full-length cDNA sequence of E. cinetorchis endoribonuclease (RNase H; EcRNH) and to elucidate its molecular biological characters. EcRNH consisted of 308 amino acids and showed low similarity to endoribonucleases of other parasites (<40%). EcRNH had an active site centered on a putative DDEED motif instead of DEDD conserved in other species. A recombinant EcRNH produced as a soluble form in Escherichia coli showed enzymatic activity to cleave the 3'-O-P bond of RNA in a DNA-RNA duplex, producing 3'-hydroxyl and 5'-phosphate. These findings may contribute to develop antisense oligonucleotides which could damage echinostomes and other flukes.