• Economic and Environmental Geology
• /
• v.23 no.4
• /
• pp.453-463
• /
• 1990

The Yechon shear zone developed by strike-slip movement was formed in a relatively high temperature condition just after the Jurassic syntectonic granites had been emplaced during Daebo Orogeny. Post-emplacement formation of the shear zone is favored by continuity of foliations and lineations within and without the granites, development of mylonitic structures in the wallrocks, deformation of pegmatite and felsite dikes, and pretectonic growth of porphyroblasts in the wallrocks. A variety of shear sense indicators in the shear zone are predominantly observed in the intensely to extremely deformed rocks. They show that bulk non-coaxial detormation has occurred, and that the sense of shear is consistently dextral with S-C fabrics, grain shape fabrics, asymmetric porphyroclast systems, mica fish, asymmetric extension structures and quartz C-axis fabrics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.256-256
• /
• 2010

투명전극부터 디스플레이 산업에 이르기까지 광범위하게 응용되어지고 있고 개발되어지고 있는 투명전도산화물(TCO)은 ZnO, In2O3, SnO2 등을 기본으로 하는 n-type 재료가 대부분이다. 그러나 투명전도 산화물을 이용한 light emitting diode(LED), 투명한 태양전지, p-형 TFT와 같은 투명전자소자의 개발을 위해서는 p-type 소재가 필수적이다. p-type TCO 소재는 비교적 연구 개발 실적이 매우 부진한 실정이었다. 1997년 넓은 밴드갭을 가지는 ABO2(delafossite) 산화물이 p-type으로서 안정적이라는 것을 보고함에 따라 이에 대한 연구가 활발히 진행되고 있다. 현재 ABO2 형태를 가진 Delafossite구조 산화물이 가장 유망한 p-type 투명전도체 소재로 거론되고 있다. Delafossite 구조가 p-type 투명전도체에 적합한 결정구조인 이유는 밴드갭이 넓고 공유결합에 유리하기 때문이다. Delafossite구조는 상온에서 2종류의 polytype(상온에서 Rhombohedaral구조와 hexagonal 구조)이 존재하며 이들은 각각 3R 및 2H의 결정 구조를 가지고 있다. ABO2의 delafossite구조에서 Cu+의 배열은 c-축을 따라 Cu-O-Cr-O-Cu의 연속적인 층 구조로서 2차원연결로 보여 진다. 보고된 Cu- base delafossite구조를 가지는 재료들은 CuAlO2, CuGaO2, CuInO2 등 여러가지가 있다. 본 연구에서는 PLD를 이용하여 c-plane 사파이어 기판위에 성장된 delafossite구조인 CuCrO2박막의 특성을 알아보았다. p-type 특성을 위하여 CuCrO2에 Zn를 첨가하였으며 그에 따른 구조적 전기적 특성을 조사하였다. 성장온도와 산소분압을 $500{\sim}700^{\circ}C$, 0~10mTorr로 변화시켜 특성을 연구하였다. 성장온도 $700^{\circ}C$, 산소분압 10mTorr에서 c-plane 사파이어 기판위에 c-축 배향의 에피성장된 CuCrO2:Zn 박막을 얻을 수 있었다. Mg를 도핑함에 따른 p-type 특성보다 현저히 떨어지는 것을 확인하였다. 또한 동일한 조건임에도 특정한 이차상의 존재를 통해 도핑된 Zn의 위치를 추측할 수 있었다. 온도와 분압에 따른 결정성과 표면상태를 SEM을 통해서 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.367-372
• /
• 2000

ZnO thin films were deposited on amorphous slide glass and $SiO_2$/Si substrates by Facing Targets Sputtering method with sputtering current 0.1~0.8 A, working pressure 0.5~3 mTorr and substrate temperature R.T~$400^{\circ}C$. When the sputtering current was 0.4 A, working pressure was 0.5 mTorr and substrate temperature was 30$0^{\circ}C$, ${\Delta}{\Theta}_{50}$ value of ZnO/glass and ZnO/$SiO_2$/si thin film was $3.8^{\circ}$ and $2.98^{\circ}$, respectively. In these conditions, we knew that ZnO thin film were deposited with good c-axis orientation on amorphous slide glass by FTS system.

• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.306-321
• /
• 1972

Molecular reorientation in (NH$_4$)$_2$SO$_4$, has been studied by cold neutron scattering. For T=300$^{\circ}$K data, the isolated quasielastic spectra and form-factors at various scattering angles are compared with four reorientational models based on SKOLD theory. Front these, it is concluded that the NH$_4$ions are performing either 3-fold four axes or 2-fold three axes reorientation with $\tau$$_{c}$=2.0$\times$10$^{-11}$ sec. The temperature dependence of f. is studied over 100$^{\circ}$K-413$^{\circ}$K and for the high-temperature phase, the widths of composite spectra are compared with the results from NMR relaxation measurements. All the results have shown that the neutron scattering method is capable of giving detalis of the reorientational modes in solids and therefore some discussions are given on the application of this method. A study of the form-factor is applied for NH$_4$I (Phase I) by comparing the measurement with the calculation based on free rotation approximation and proposed a reorientation model of NH$_4$ ions in the octahedral potential cage with $\tau$$_{c}$$\leq$10$^{-12}$ sec. Also a brief theoretical prediction for the effect of reorientational motions on the inelastic spectrum is discussed.sed.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.44-47
• /
• 1994

High $T_{c}$ superconducting $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$ thin film was grown up for c-axis orientation by epitaxial growth method on $LaAlO_{3}$ single crystal substrate. The crystal structures of this thin film were found to be c-axis orientation by X-ray diffraction patterns. Hall effect and resistivity measurements were made by van der Pauw method. Hall resistivity was calculated from the magnetoresistivity by considering thermomagnetic effect. The relation was $pH=p_{s}tan{\alpha}_{n}-QBT\frac{S_s}{K_s}$ The measured Hall resistivity and the calculated one are in good agreement each other.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.249-250
• /
• 2006

In this study, we tried to Improve c-axis orientation of ZnO thin films used in a piezoelectric layer of FBAR devices. First. ZnO deposition conditions were determined by changing various conditions of RF sputter such as RF power, pressure and $O_2$ contents. The Piezoelectric layer was deposited on ZnO buffer layer of dense structure which was formed by ALD equipment. The c-axis orientation of ZnO piezoelectric layer was measured by XRD and we confirmed fine Grains and columnar structure by SEM, AFM.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.41-47
• /
• 1993

Effects of Ta addition on Co-Cr pependicular magnetic recording media were studied to obtain high perpen-dicular coercivity at lower substrate temperature. For the purpose. magnetic properties and microstructures of Co-Cr-(Ta) films were studied by varying the Cr contents from 17 to 21 at.% and Ta contents for 0 to 3.2 at.%. Effectiveness of Ta addition in increasing perpendicular coercivity was significant for lower Cr content films. The increasement of perpendicular coercivity was more pronounced for the films deposited on $100^{\circ}C$ heated substrate in the case of ${(Co_{83}Cr_{17})}_{98.4}Ta_{1.6}$ composition. The cause of the increase of perpendicular coercivity was considered due to not the grain refinement effects and the improvement of c-axis alignments but increase of Ta and Cr segregation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.291.1-291.1
• /
• 2014

산화아연 박막은 아연이 코팅된 테프론 기판 위에 졸-겔 스핀코팅 방법을 이용하여 각기 다른 후열처리 온도에서 제작되었다. 산화아연 박막의 후열처리 온도에 따른 구조적, 광학적 특성은 field emission scanning electron microscopy (FE-SEM), X-ray diffractometer, and photoluminescence spectroscope를 이용하여 분석하였다. 후열처리 온도를 달리하여 성장한 모든 산화아연 박막은 수지상(dendrite) 구조를 가지고 있으며, 이 수지상 구조 위에 약 20 nm의 산화아연 입자들이 성장되었다. 후열처리 온도가 증가함에 따라 c-축 배향성이 우세하게 나타났으며, 인장응력도 증가하였다. 후열처리 온도 $400^{\circ}C$에서 Near-band-edge emission (NBE) 피크는 적색편이(red-shift) 하였고, 후열처리 온도가 증가함에 따라 deep-level emission (DLE) 피크의 세기는 감소하였다. 또한 $400^{\circ}C$의 후열처리 온도에서 NBE 피크의 반치폭(FWHM)이 가장 작았으며, INBE/IDLE의 비율이 가장 높았다. 따라서 $400^{\circ}C$의 후열처리 공정에 의해 결정성 및 광학적 특성이 가장 우수한 산화아연 박막을 얻을 수 있었다.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.803-810
• /
• 2001

A nonlinear optical hyperbranched polyester (PE-Azo/Hyper) was synthesized from 4-[N,N-bis(hydroxyethyl)amino-4'-formyl] azobenzene and cyanoacetic acid by a Knoevenagel polycondensation using 4-(dimethylamino) pyridine as a base. The resulting polymer was soluble in polar aprotic solvents such as N,N-dimethylformamide and 1-methyl-2-pyrrolidinone and could be processed into optical quality films by spin coating. The molecular weight was determined to be $M_w$=61,800 ($M_W/M_n{=1.86}$) by gel permeation chromatography using polystyrene as a standard. No melting point was detected by differential scanning Calorimeter, indicating that this polymer presents an amorphous state. It shows a glass transition temperature of $121^{\circ}C$. The second-order nonlinear optical coefficient $d_{33}$ of the poled polymer determined by the second harmonic generation at 1064 nm was 25.4 pm/V.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.59-63
• /
• 2003

체적 음향파 공진기(Film bulk acoustic resonator, FBAR)는 2~10 Ghz 대역의 차세대 이동 통신용 구현에 필수적인 부품이기 때문에 국내외에서 활발한 연구가 진행되고 있다. 본 논문에서는 FBAR 소자 제조를 위한 연구에서 원자층 증착(Atomic layer deposition, ALD) 방법에 의한 ZnO buffer layer 위에 스퍼터링 방법을 이용한 2-step 방법을 사용하여 제조하였다. ALD를 이용한 ZnO buffer layer는 diethylzinc(DEZn)/$H_2O$를 순차적으로 주입하여 증착하였다. 이 때 두 원료물질 사이에 고순도 Ar 가스를 purge gas로 사용하였다. 원료의 주입시간은 1초, 원료간 purge 시간은 23 초로 하고 증착하였다. 2-step 방법을 이용할 경우, 스퍼터링 방법만을 이용하였을 때 보다 우수한 c-축 배향성 및 박막의 표면형상이 관찰되었다. 2-step 방법을 FBAR 소자 제작에 적용할 경우 보다 우수한 특성의 공진기를 제작할 수 있을 것으로 기대된다.