• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.271-273
• /
• 2003

최근에 전력선통신(PLC: power line communication)에 관한 연구 및 개발이 활성화되고 있는 가운데, 정부에서는 전력선통신을 위한 전송채널의 주파수허용범위를 기존의 협대역인 450kHz에서 광대역인 30MHz로 확대할 계획이다. 현재, PLC 시스템에서는 대용량정보를 고속으로 전송하기 위한 고속 PLC기술의 개발이 활발히 진행되어지고 있으며, 이러한 통신시스템 기술의 구현을 위해서는 새롭게 확대될 30MHz대역에서의 전력선채널의 분석이 무엇보다도 중요한 해결 과제라고 할 수가 있을 것이다. 전력선은 각종 전기기기와 가전제품 및 사무기기로부터 발생되는 잡음들이 직접 유입되며, 또한 부하가 전력선에 연결되는 시간과 공간에 따라 전송 특성이 수시로 가변하는 특성을 가진다. 이와 같은 열악한 전력선통신채널 환경을 극복하고 통신의 에러극복능력을 향상시키기 위해서는 기존의 협대역 채널모델을 그대로 적용하기에는 부적합한 면이 많으므로, 새롭게 허용될 광대역 주파수를 갖는 전력선 채널에 대한 모델링기법이 요구된다. 따라서, 새롭게 인가될 광대역 채널을 위한 효율적인 전력선통신시스템을 개발하기 위해서는 전력선채널의 리모델링에 근거한 다양하고 실험적인 고찰이 수반되어야 하리라고 판단된다. 그러므로, 본 논문에서는 Mixture 잡음 모델링기법을 이용하여, 부하변동 및 가변적인 잡음 특성을 가진 전력선채널모델을 새롭게 분석하였다. 또한, 새롭게 분석한 전력선채널모델에 관한 수식을 직교 코드에 의한 다중접속 통신 기술인 CDMA 방식에 적용하여 비트 에러율을 유도해 봄으로써 그 유효성을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1186-1192
• /
• 2005

In this paper, we propose a novel channel estimation method based on pilot channel in a frequency interleaved multicarrier code division multiple access (MC-CDMA). Using the chip interleaving (CI) technique in the frequency domain make it possible to achieve higher frequency diversity gain than the system with conventional symbol interleaving. However, in CI-MC-CDMA systems, a pilot channel-based channel estimation (PCCE) cannot be applied because the orthogonality between pilot symbols and the data symbol is not maintained. The proposed method alters the system structure in order to maintain orthogonality between data and pilot channels over two consecutive subcarriers. Therefore, it can obtain accurate channel state information (CSI) in CI-MC-CDMA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.224-231
• /
• 2003

In this paper we proposed system parameter values of ultra-wideband Impulse Radio systems for the frequency band(3.1~10.6GHz), which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the multiple access interference environment. According to result, application of possible pulse duration($t_{n}$) is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of the same pulse signal power, we could know that system performance was changed by pulse repetition number($N_{s}$ ) regardless of pulse duration. Thus, We could know that we have to need duration of monocycle pulse and setting of frame un it time(Τ$_{f}$ ) according to multi user numbers and design proper pulse repetition number by transfer rate in multiple access systems design. In the IR system that needs high speed transmission more than 50 Mbps in multiple access interference environment, we could know that very serious performance decrease by multiple access interference happens. Therefore, as the design of high speed multiple access IR system, it should be designed to additional improvement techniques that can remove multiple access interference at the same time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.239-247
• /
• 2003

This paper presents a dual-rate (2.4/4.0 kbps) Improved Harmonic-CELP(IHC) speech coder based on the EHC(Efficient Harmonic-CELP) which was presented by the authors. The proposed IHC employs the harmonic coding for voiced and the CELP for unvoiced segments. In the IHC, an initial voiced/unvoiced estimate is obtained by the pitch gain and energy. Then, the final V/UV mode is decided by using the frame energy contour. A new harmonic estimation combining peak picking and delta adjustment provides a more reliable harmonic estimation than that in the EHC. In addition, a noise mixing scheme in conjunction with an improved band voicing measurement provides the naturalness of the synthesized speech. To demonstrate the performance of the proposed IHC coder, the coder has been implemented and compared with the 2.0/4.0 kbps HVXC(Harmonic excitation Vector Coding) standardized by MPEG-4. Results of subjective evaluation showed that the proposed IHC coder and produce better speech quality than the HVXC, with only 40% complexity of the HVXC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.548-554
• /
• 2009

OFDM systems are very sensitive to the frequency offset. Therefore, frequency offset estimation is one of the most important procedures in OFDM systems. Ren's periodogram-based frequency offset estimation scheme consists of three steps which estimates the frequency offset accurately. However, there are the drawbacks of the limited frequency offset estimation ranges in the second and third estimation steps of the Ren's scheme. This ranges are insufficient compared with the overall signal bandwidth, making the high complexity of the first estimation step. In this paper, we propose a novel lower complexity frequency offset estimation scheme for OFDM systems which extends the frequency offset estimation range. The simulation results show that the proposed scheme has a wider frequency offset estimation range and lower complexity than those of the Ren's scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.922-927
• /
• 2009

Utilization problem of the limited spectrum is the one of the most important issues in wireless communication systems. Cognitive radio technique which is finding and utilizing frequency holes is also one of those techniques. Specially, the spectrum sensing technique to detect the primary user signal is a core technology in cognitive radio area. In this paper, we propose the spectrum sensing algorithm using Bussgang theorem. The proposed algorithm calculates the statistical difference between the Gaussian noise and the primary user signal by applying Bussgang theorem to the received signal. The algorithm is not affected by noise uncertainty and can detect the primary user signal in the very low SNR environment. We evaluate the algorithm through computer simulations with 12 ATSC A/74 DTV signal captures based on IEEE 802.22 WRAN and formulate the sensing threshold for the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1414-1424
• /
• 2004

In this paper, an algorithm using wavelet transform for detecting a cut that is a radical scene transition point, and fade and dissolve that are gradual scene transition points is proposed. The conventional methods using wavelet transform for this purpose is using features in both spatial and frequency domain. But in the proposed algorithm, the color space of an input image is converted to YUV and then luminance component Y is transformed in frequency domain using 2-level lifting. Then, the histogram of only low frequency subband that may contain some spatial domain features is compared with the previous one. Edges obtained from other higher bands can be divided into global, semi-global and local regions and the histogram of each edge region is compared. The experimental results show the performance improvement of about 17% in recall and 18% in precision and also show a good performance in fade and dissolve detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1395-1401
• /
• 2004

In The objective of this paper is to apply blind minimum output energy multiuser detection method to multicarrier direct sequence code division multiple access system. The performance of MC/DS-CDMA is reduced due to multiple access. To increase the performance of system, we need to cancel multiple user components. Blind interference canceller is able to detect the desired's information with the only minimal information of the desired user. We evaluate the performance of the proposed receiver under Gaussian channel. Simulation results show that the proposed receiver has about 6［dB］ gain of signal to noise ratio without multiple user interference and has about 3［dB］ gain of SNR with multiple user interference. Also, the result of comparing the capacity of the active users shows that the proposed method has about 2 times capacity more than conventional method. As a conclusion, simulation results show that the proposed method has better performs better than conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3C
• /
• pp.255-263
• /
• 2010

In this paper, we present an efficient cooperative transmission scheme for high speed 60GHz WPAN system. In 60GHz, the cooperative transmission with relay is effective scheme because signals are exceedingly attenuated according to the distance and the transmission is impossible when there is no LOS between transmitter and receiver. Moreover, the reliability of signal in destination can be improved by receiving data from a relay as well as a transmitter. However, the overall data rate is reduced because transmission time is more required for relay. To solve this problem, we propose a cooperative transmission scheme with RS-CC serial concatenated codes. In the proposed cooperative transmission scheme, the relay can reduce the transmission data size because the only parity bits of systematic RS code are transmitted after encoding by CC. But the computational complexity is increased at the relay and the destination.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.351-356
• /
• 2006

In this paper, the high efficiency Doherty power amplifier has been designed and realized for microwave applications. The Doherty amplifier has been implemented using silicon MRF 281 LDMOS FET. The RF performances cf the Doherty power amplifier (a combination of a class AB carrier amplifier and a bias-tuned class C peaking amplifier) have been compared with those of a class AB amplifier alone. The realized Doherty power amplifier P1dB output power has 33dBm at 2.3GHz frequency. Also the Doherty power amplifier shows 11dB gain and -17.8dB input return loss at 2.3GHz to 2.4GHz. The designed Doherty amplifier has been improved the average PAE by 10% higher efficiency than a class AB amplifier alone. The Maximum PAE of designed Doherty power amplifier has been 39%.