• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.167-172
• /
• 2015

In this paper, we have compared some radio propagation models in order to verify the performance of W.C.Y LEE propagation model in mountain area. The four propagation models, which are Okumura-Hata, ITU-R P.525, Egli and W.C.Y. LEE, are analyzed by comparing the differences between measured values and propagation loss estimation values. And a correction method for W.C.Y LEE model is suggested to improve the performance of W.C.Y. LEE model with measured data in mountain area. Simulation results show that the estimation error using W.C.Y LEE model is the lowest among four propagation models. Also, the results show that the corrected W.C.Y LEE model with suggested method improves the performance of propagation loss estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.84-89
• /
• 2007

In order to design and test an SoC modem for high speed communication, the platform with the architecture of such high speed communication is needed. That platform is needed for testing large data in speed of 500Mbps. This paper shows that transmission data can be uploaded and downloaded by 250Mbps between a virtual modem target board and a PC through the AHB-PCI IP and the speed of based on DPRAM and PCI.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.398-398
• /
• 2009

텐덤 구조의 양자점 태양전지에서 양자점의 크기에 따라 에너지 밴드갭이 달라 넓은 대역의 태양광을 이용할 수 있다. 이러한 양자점의 크기는 증착 두께의 제어로 조절이 가능하다. Si과 C target을 이용한 RF Co-sputtering 법으로 각각 증착시간을 다르게 하여, SiC/$Si_{1-x}C_x$(x~0.20)인 실리콘 양자점 초격자 박막을 제조하고, $1000^{\circ}C$에서 20분간 질소 분위기에서 열처리를 하였다. Grazing incident X-ray diffraction(GIXRD)를 통해서 Si(111)과 $\beta$-SiC (111)이 생성되었음을 확인하였고, High resolution transmission electron microscopy(HRTEM) 사진으로 양자점의 크기와 분포 밀도를 확인할 수 있었다. Photoluminescence(PL)에서 1.4, 1.5, 1.7, 1.9eV의 Peak이 확인되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.151-155
• /
• 1999

We proposed the beam tilted antenna by aperture coupled microstrip array, found out the values of design parameters by using Ensemble 5.1 of Ansoft Co., and analysed the performance of fabricated antenna. In order to point to the fixed satellite on the nothern hemisphere, 3 dB beamwidth of this antenna is 25$^{\circ}C$ to 65$^{\circ}C$. Operation bandwidth is 2.51GHz to 2.59GHz. The structure of this antenna is composed by 3 types of squared patches; reflector, driver, and director. The maximum antenna gain is 6.2dB at 2.56GHz and elevation angle of 42$^{\circ}C$. Front-to-Back ratio is more than 13dB at the same condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2006

In this paper, to overcome the effect of nonlinear power amplifier, CE-CPSK(Constant Envelope Continuous Phase Shift Keying)modulation method which has the constant envelope and continuous phase characteristics is proposed. The code acquisition performances of the CE-CPSK modulated system and BPSK system are analyzed. And the performance is evaluated in terms of mean acquisition time and detection probability with the output backoff of the amplifier in multiuser environment. Results performed in a channel having a high degree of AM nonlinearity(AM-to-AM conversion), have shown that the CE-CPSK signal, when passed through class C-nonlinear Amplifier, has a spectrum with greatly reduced sidelobes compared to the conventional BPSK signal. The code acquisition performance of a CE-CPSK modulation system is better than that of BPSK system with nonlinear amplified multiuser environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.817-824
• /
• 2006

The crest factor properties of 16-QAM modulated one- and two-code assisted multi-carrier code-division multiple-access (MC-CDMA) signals employing complementary pair as spreading sequences are characterized. It is shown that a set of relationship between the two 16-QAM symbols entirely characterize the power envelope waveforms of the signals. There exists 60 different sets of relationship, which results in 16 different crest factors as a result of various equivalent transforms on the corresponding message symbols. It is also shown that the individual crest factor corresponding to each message combination is always bounded by 3dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.239-240
• /
• 2006

저손실 고투자율 특성을 가지는 ${\alpha}-Fe$ 나노결정 자심재료를 제조하기 위한 열처리 온도 변화에서, $510^{\circ}C$의 열처리 조건에서 가장 높은 투자율과 신호전송 특성을 나타내었다. 저주파 대역에서의 신호 전송 특성은 자심재료의 자기적 특성에 지배적인 영항을 받으며, 고주파 대역의 신호전송 특성은 임피던스 매칭으로 향상시킬 수 있었다. 그리고 커플러의 출력부에 신호증폭장치를 삽입하여 자기유도에 의해 신호가 커플링될 때 발생하는 삽입손실을 보완하여 커플러의 특성을 향상시킬 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1297-1304
• /
• 2002

The phase locked oscillator having a low phase noise and high output in Ku-band was designed. To obtain the low phase noise and high output characteristics of oscillator, the nonlinear equivalent circuits of p-HEMT was analyzed by TOM method and we have decided the trade-off bias point between the low phase noise and the output power of oscillator. The designed phase locked oscillator with prescaler for stable operation, experiment results exhibits output power of 1003m with phase noise in the phase locked state of -824BC/HB at 10mz offset from 13.250Hz, and simulation result of 1003m output power in the phase noise -840Bc/Hz at 10KHz offset frequency respectively. a good agreement has been obtained between simulations and experiments results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.68-74
• /
• 2001

A design and implementation method for the UHF-band(800MHz) variable attenuator using the 3dB coupler is proposed. The 90 degree, 3-dB Coupler is used for the variable attenuator. The principal theory for the 3-dB coupler is introduced. The 3-dB Coupler is designed by the mathematical analysis and a computer simulation tool. A PIN diode is used for the variable resistor at UHF-band. The variable attenuator using the 3-dB coupler and the PIN diode is designed and implemented. The measured results for the variable attenuator by a network analyzer show that the insertion loss is below -l0dB, and the continuous variable attenuation range is about 10dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2221-2229
• /
• 1998

Handoff is an important parameter for system performance and capacity analysis in CDMA cell planning. In this paper, simulation tool for analyzing the effects of soft handoff on cell planning of CDMA network is developed by studying propagation model in 1.9GHz frequency specrum, soft hadnoff algorithm given by IS-95, and several parameters for CDMA cell planning. By using the tool, soft handoff gain and effects of soft handoff on cDMA system performance and capacity are analyzed. Research results and simulation tool developed in this paper can be used for optimal CDMA cell planning for PCS and IMT-2000 in 1.9GHz frequency spectrum such as locating base station and parameter optimization.