• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.843-849
• /
• 1998

A voltage controlled oscillator using dielectric resonator for 2.4 GHz WLL System is designed and fabricated. To improve the phase noise characteristic resonator is used as an inductor of VCO. At the bias condition of 5 V and 10 mA, the output power and phase noise in the operating frequency range of 2210~2240 MHz are 0 dBm and 100 dBc/Hz 10 kHz offset from the carrier, respectively. The phase noise and harmonic response of fabricated VCO are suitable for WLL system.

• Electronics and Telecommunications Trends
• /
• v.26 no.2
• /
• pp.14-24
• /
• 2011

AIP를 설정하는 방법에서는 국가에 따라 일부 차이를 보이고 있지만, 본 고에서는 종주국이라 할 수 있는 영국에서의 최소비용대체법을 사용한 한계가치 산출방식을 사용하여 2011년에 주파수 재할당 대상이 되는 800MHz 대역을 대상으로 모형을 제시하고 적용결과를 분석하였다. 먼저 추가주파수를 사용하는 시스템과 주파수 대신 기지국 투자를 추가하는 시스템의 비교를 통하여 두 시스템간 셀간 면적비를 기준으로 한계가치를 도출하는 모형을 제안하고, 새로 도입될 기술인 LTE의 시스템 성능을 평가할 수 있는 시스템 레벨 시뮬레이터를 3GPP에서 제안하고 있는 이동통신 시스템 환경 및 요구조건에 따라 제작하였으며, 이 시뮬레이터를 바탕으로 시스템 도입 지역 또는 운영 주파수 대역에 따라 시뮬레이션을 통하여 시스템 용량을 산출하였다. 마지막으로 제안된 한계가치 모형과 시뮬레이션 결과를 결합하여 최종적으로 한계가치 산정의 기준이 될 추가기지국의 규모를 추정할 수 있는 모델을 제시하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.237-240
• /
• 2000

본 논문에서는 ISM(Industrial Scientific Medical) 대역 424MHz부터 429MHz까지의 범위에서 동작하는 열차 후부 감시제어 시스템용 RF 전력증폭기를 설계 및 제작하였다. 424MHz대역에서의 2W급 대전력 증폭기의 설계방법으로는 Double Stub Tuner구조를 이용하여 최적 부하 임피던스를 추출하는 방법을 제시하였고, 초고주파 시뮬레이터인 Serenade8.0을 사용하여 Drive_amp와 LPF를 설계하였다. 제작된 Drive_amp와 LPF의 성능 및 특성은 시뮬레이션 한 결과와 거의 일치하였으며, 대전력 증폭기의 측정결과로는 추출하고자 하는 출력 레벨인 33㏈m을 얻을 누 있었고, 원신호의 Hamonic 주파수 성분과는 40.34㏈c의 결과를 보임으로써 안정된 전력증폭기를 구현하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.833-840
• /
• 2013

A radar altimeter which measures the distance using radio wave developed by domestic technology has been applied to various missiles. It is used also for calculating the error of integrated navigation technique. There are a couple of methods to reduce the error but in this paper, we proposed to utilize existing C-band radar altimeter main body with frequency conversion. We designed and manufactured the frequency converter and Ku-band antenna to accomplish this goal. From the test results of products' function and performance, we could expect the possibility of applying this method to enhance the missiles' integrated performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.272-273
• /
• 2005

전력선 통신을 위한 커플러용 자심재료의 열처리 온도증가에 따라 결정이 성장하여 인덕턴스는 증가 하였고, $550^{\circ}C$ 이상에서는 포화점을 나타내었다. 커플러는 자심재료의 투자율이 높을수록 커플러의 저주파 대역의 신호전승 특성이 우수하게 나타났지만, 주파수 증가에 따라 급격히 저하하는 불안정한 특성을 나타내었다. 그리고 절단면 사이의 Air gap 증가에 따라 10 MHz이하의 주파수 대역에서 신호전승특성이 급격히 감소하였고, 허용전류는 직선적으로 증가하였으며 Air gap이 $600{\mu}m$이상일 때 300A의 전류에서 특성을 발휘하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.90-99
• /
• 2009

This paper presents the implementation of RFID EPC global network educational system based on using 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The ATmega128 VLSI chip is used for the processor of the reader and the active tag. As the development environment, AVR compiler is used for the reader and the active tag of which the programming language is C. The visual C++language of the visual studio on the PC activated as the server is used for development language. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Finally the data written from the active tag's memory is sent to the PC via the reader as "read" operation and compare the received data with one already sent to the tag. Software implementation of 900MHz EPC global RFID educational system is done on the basis of these functions.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.139-145
• /
• 2008

There has been lots of studies on communication systems using millimeter wave recently in many countries, specially in newly assigned 57GHz ~ 64GHz ISM band. Among those studies, IEEE 802.15.3c standard proposes OFDM (Orthogonal Frequency Division Multiplexing) systems for high data rate transmission support. But OFDM method has the PAPR (peak-to-Average Power Radio) problem The PAPR problem is to decline the performance of the transmission system due to signals distorted severely when passing through nonlinear components such as ADC/DAC and power amplifiers. In order to solve the problem of P APR, this paper suggests SSC (Sine Soft Clipping) and analyzes the PAPR, CCDF, PSD, BER by applying SAW(Surface Acoustic Wave) filter and power amplifiers to IEEE 802.15.3.c OFDM WPAN systems.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.687-692
• /
• 2009

This paper presents the development of RFID educational system based on 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The ATmega128 VLSI chip is used for the processor of the reader and the active tag. As the development environment, AVR compiler is used for the reader and the active tag of which the programming language is C. The visual C++language of the visual studio on the PC activated as the server is used for development language. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Software design of 900MHz RFID/USN educational system is done on the basis of these functions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.24-38
• /
• 2006

In this paper, we investigate the design and fabrication of a conical spiral antenna suitable for satellite TT&C applications. The shape of the spiral is optimized using a commercial electromagnetic software for good gain and axial ratio performances over $2.0{\sim}2.3\;GHz$ frequencies. A coaxial infinite balun feeding the spiral is designed using experimental methods. A method for precision fabrication of the spiral is presented. Measurements of the fabricated antenna show satisfactory performances over $2.0{\sim}2.3\;GHz$ such as a reflection coefficient less than -18 dB, a maximum gain greater than 4 dB, a gain greater than 0 dB over angles ${\pm}75^{\circ}$ from the antenna boresight, an axial ratio less than 5 dB over angles ${\pm}90^{\circ}$ from the antenna boresight, a front-back ratio greater than 15 dB.