• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.951-954
• /
• 2001

본 논문에서는 SDR (Software Defined Radio)시스템을 위한 디지털 IF (Intermediate Frequency)수신기를 구현하였다[1][2]. 구현된 수신기의 하드웨어 구조는 AD변환부, PDC(Programmable Down Converter)부, DSP (Digital Signal Processing)부분으로 이루어졌다. AD변환부는 Analog Devices사의 AD6644를 이용하여 아날로그 신호를14bit의 디지털 신호로 변환된다. PDC부분은 Intersil사의 HSP 50214B를 이용하여 14bit 샘플 된 IF(Intermediate Frequency)입력을 혼합기와 NCO(Numerically Controlled Oscillator)에 의해 기저대역으로 다운 시키는 역할을 한다. PDC는 CIC (Cascaded Integrator Comb)필터, Halfband 필터 그리고 프로그램할 수 있는 FIR필터로 구성되어 있다. 그리고 PDC부분을 제어하고 PDC부분에서 처리할 수 없는 캐리어, 심볼 트래킹을 위해 Texas Instrument사의 16비트의 고정소수점 DSP인 TMS320C5416과 Altera사의 FPGA를 사용하였다. 그러므로 중간주파수 대역과 기저대역 간의 신호변환을 디지털 신호처리를 수행함으로써 일반적인 아날로그 처리방식보다 고도의 유연성과 고성능 동작이 가능하고 시간과 환경 변화에 우수한 동작 특성을 제공한다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.413-416
• /
• 1995

고주파 마그네트론 스펏터링법을 이용하여 ZnO막을 제조하고 유리기판 위에 ZnO-SAW필터를 제작하였다. ZnO막의 제조 조건은 고주파 전력 150W, 기판온도 $200^{\circ}C$, 분위기압 5mTorr 및 O2/(Ar+O2)비 50%였다. 한편 IDT(Inter-digital transducer)전극은 전극 폭을 2.56mm, 전극 거리를 2,936mm, λ/8폭을 $8mu$m로 설계하였다. 제작된 ZnO-SAW필터의 주파수 응답을 측정하기 위해 소자는 mount(TO8)에 고정시켰다. ZnO SAW필터의 통과 대역(3 dB대역폭)은 345.2~44.8 MHz로 9.6MHz의 대역 폭을 나타내었으며 중심주 파수는 40 MHz를 나타내었다. 또한 삽입 손실은 39 dB, 통과 대역에서의 리플(ripple)은 $\pm$ 0.8 dB 및 rejection은 17 dB를 나타내었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.193-196
• /
• 2000

본 논문에서는 FG-CPW(Finite-Ground Coplanar Wave-Guide) 구조의 단일 평형 다이오드 믹서에 대해서 논의된다. 주파수 영역은 무선 LAN 대역으로 선택하였다. RF 신호는 5.725-5.875 GHz, LO 신호는 5.58GHz, 그리고 IF 신호는 140 MHz가 사용된다. 제시된 FG-CPW 구조의 LPF(low pass filter)는 회의크기를 줄일 수 있으며, 불필요한 하모닉 억제 특성이 우수하다. 5.635 GHz에서 5 dBm의 Power를 갖는 LO신호가 입력될 때 6.2 dB 의 혼합기의 변환손실을 얻는다. 또한 LO-RF isolation과 LO-IF isolation은 각각 30 dB $\Omega$dB 의 특성을 보인다. 이 혼합기는 CPW 구조가 일반적으로 알려진 밀리미터 대역에서의 장점뿐만 아니라 C-Band의 무선 LAN 분야에도 충분히 응용될 수 있으리라 기대된다.

• Electronics and Telecommunications Trends
• /
• v.21 no.4 s.100
• /
• pp.118-128
• /
• 2006

테라헤르츠 대역(100GHz-10THz)은 광파와 전파의 경계 영역에 존재하며 기술적으로 뒤늦게 개발된 주파수 대역으로 테라헤르츠 대역을 개척하기 위해 최신의 레이저기술, 반도체 기술 및 고온초전도 기술을 사용하는 새로운 전자기파 기술로 발전하였다. 테라헤르츠 전자파 펄스는 펨토초 광펄스에 의한 초고속 광스위치(광전도 안테나),반도체 표면, 양자우물 구조 등의 여기(excitation)에 의해 발생하고, 두 가지 연속파(CW) 레이저 빔을 혼합하면 주파수 가변의 테라헤르츠 전자파가 발생한다. 본 논문에서는 이와 같은 THz 전자파 펄스의 발생 및 검출과 THz 응용분야에 대해 기술하고자한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1039-1046
• /
• 2007

In this paper, a coupled-defected ground structure(C-DGS) using negative inductive coupling is proposed and a bandstop filter(BSF) using C-DGS is designed and fabricated. The proposed C-DGS is the closely-located DGS cells for the negative coupling, the negative coupling of ground currents between adjacent DGS cells greatly improves the stopband characteristics. The proposed BSF utilizing the sharp cutoff response of the C-DGS has a -10 dB rejection band from 4 GHz to 11.3 GHz. A maximum attenuation rate is -64.3 dB/GHz in 3 cell structure, -108 dB/GHz in 5 cell structure. The C-DGS BSF shows the improved attenuation rate 3.8 times in 3 cell structure, 2.4 times in 5 cell structure, Also, the C-DGS BSF is reduced to 35.2 % and 40 % of the DGS BSF, respectively, due to the closely-located DGS cells. We fabricated the single gate mixer using C-DGS BSF. The single gate mixer has 6.6 dB conversion gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1025-1033
• /
• 2004

This paper covers the detection of covert direct sequence spread spectrum signal without the PN(Pseudo Noise) code information. Due to its low probability of interception, the difficulty of spectrum surveillance increases. Detection parameters are the signal existence of given bandwidth, the length of spreading sequence used by transmitter, and the identification of spreading code for detected chip length. The triple correlation function(TCF) value which is one of the higher order statistical signal processing techniques can be used to detect spread spectrum signal without a prior knowledge, but, it has weakness that TCF results depend on the spread data sequence in actual application. This paper proposes the new scheme that not only overcomes the weakness but also presents better performance than the traditional TCF scheme. The performance comparison of conventional TCF with proposed technique shows that the triple correlation estimator(TCE) has better detection capability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.343-355
• /
• 2003

Fair bandwidth allocations at routers protect adaptive flows from non-adaptive ones and may simplify end-to end congestion control. However, traditional fair bandwidth allocation mechanisms, like Weighted Fair Queueing and Flow Random Early Drop, maintain state, manage buffera and perform packet scheduling on a per-flow basis. These mechanisms are more complex and less scalable than simple FIFO queueing when they are used in the interi or of a high-speed network. Recently, to overcome the implementation complexity problem and address the scalability and robustness, several fair bandwidth allocation mechanisms without per-flow state in the interior routers are proposed. Core-Stateless Fair Queueing and Rainbow Fair Queuing are approximates fair queueing in the core-stateless networks. In this paper, we proposed simple Layered Fair Queueing (SLFQ), another core-stateless mechanism to approximate fair bandwidth allocation without per-flow state. SLFQ use simple layered scheme for packet labeling and has simpler packet dropping algorithm than other core-stateless fair bandwidth allocation mechanisms. We presente simulations and evaluated the performance of SLFQ in comparison to other schemes. We also discussed other are as to which SLFQ is applicable.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.320-320
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.402-407
• /
• 2013

In this paper, we consider an interference scenario and interference simulation method of intra-wireless vessel communications using SEAMCAT (Spectrum Engineering Advanced Monte-Carlo Analysis) simulator. The interference between electromagnetic equipment and low power radio apparatus can deteriorate a stability of vessel system and it is necessary to analyze the interference probability between radio devices. The proposed simulation method in the 13.56MHz ISM frequency band shows that the interference effect can be minimized when the distance between the devices is greater than 4.7m and 2.7m in case that the victim receiver (VR) are RFID and remote control(RC) toy, respectively. The proposed interference scenario and simulation method are expected to be helpful in the interference probability analysis and regulation policy in the ISM frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.476-481
• /
• 2004

Since the bands 27.5 ∼ 28,350㎓ and 31.0 ~ 31.30Hz for existing fixed-satellite service were allocated to tile HAPS system in WRC-2000, the analysis on the interference effects between the existing FSS/GSO system and FS/HAPS system should be needed. To do study on the interference effects between above two systems, we can consider two frequency operational conditions, one is the Reverse mode, the other is Forward mode. In this paper, we analyzed the interference effects from airship of HAPS systems to satellite of the GSO system in the case of Reverse condition mode due to the C/I criterion, the latitude of HAPS and transmitting power of HAPS airship. In future, these results will be vital data to share between HAPS and GSO systems.