• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.525-531
• /
• 2017

Objectives: The purpose of this experiment is to better understand the nitrogen and phosphorus removal ratio according to operating conditions in an iron electrolysis system consisting of an anoxic basin, aerobic basin, and iron precipitation apparatus. Methods: Iron electrolysis consists of an iron precipitation reactor composed of iron plates in oxic and anoxic basins. We studied the interrelation coefficient between T-N and T-P removal rates and F/M ratio, and the C/N ratio and BOD removal rate. Results: The F/M ratio and the T-N and T-P removal rate per unit area have interrelation coefficients of 0.362 and 0.603, respectively. The removal rate per MLVSS and the T-N and T-P removal rate per unit area have respective interrelation coefficients of 0.49 and 0.59. Conclusions: The removal rate of T-N and T-P increased with the increasing F/M ratio in the influent, and they also linearly increased in proportion to the C/N ratio of influent and BOD removal rate of the reactor.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.499-506
• /
• 2005

This study was performed to investigate the effects of influent C/N ratio on the removal of organic and nitrogenous compounds by two nonwoven fabric filter bioreactors. The reactors were alternately aerated at an aeration/nonaeration period ratio of 60 min/60 min, and fed with wastewater only during nonaeration period. The influent C/N ratio (COD/TKN) was gradually reduced from 10 to 2. The influent was prepared by diluting the leachate from a foodwaste treatment facility in I city so that the COD concentration could be about 2,500 mg/L. The C/N ratio of the wastewater was adjusted by adding ammonium chloride. The results of the experiment showed that the COD and BOD concentration of the effluent was $40{\sim}54\;mg/L$ and $1{\sim}4\;mg/L$, respectively at the C/N ratios of $10{\sim}3$, and the effluent SS concentration was always below 2.0 mg/L. The T-N removal efficiencies were 96% or higher at C/N ratios of $10{\sim}5$, but decreased to 83% and 81%, respectively at the C/N ratios of 3 and 2.8. At the C/N ratios of 2.6 and 2, the effluent quality deteriorated due to ammonia toxicity. The fraction of nitrifying microorganism in the reactors increased from 10% to 20% as the C/N ratio decreased from 5 to 2.6. Alkalinity consumed were $3.12{\sim}3.49\;g$ alkalinity/g T-N removed at the C/N ratios of $10{\sim}5$, which are lower than the theoretical value of 3.57. However, the ratio increased to 4.63 and 4.87 g alkalinity/g T-N removed, respectively at the C/N ratios of 3 and 2.8.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.39-51
• /
• 1994

When broiler litter was composted under the control of peak temperature of piles(uncontrolled, controled below $70^{\circ}C$ and below $60^{\circ}C$), changes of physical and chemical parameters were determined throughout the processing period. Broiler litter was composted in each of three $1.0{\times}1.0{\times}1.2m$ dimensional facilities for 8 weeks. After 5 to 6 weeks of composting, broiler litter was converted into the final compost with no ammonia odour, rice hull size of particle, and faint brown color. Central temperature of piles reached to the peak(about $69{\sim}70^{\circ}C$) within 3 to 4 days after composting and gradually decreased thereafter. The final product contained 26.5% of moisture, 9.0~9.1 of pH, and 14.0~14.3 of C/N ratio. The increase of C/N ratio with processing resulted from the considerable loss of N. The total wet weight of the final composts was an average of 38.3% of the initial weight, the dry weight of those 64.1%, and the organic matter weight of those 34.8%. Treatments of central temperature of composts did not affect changes of moisture, pH, C/N ratio, total wet weight, total dry weight, and total organic matter weight. In general, composted broiler litter was converted into the final product with little change in physical and chemical parameters after 5 to 6 weeks of processing. Nitrogen losses during the composting should be prevented for the improvement of the composting efficiency of broiler litter.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.445-452
• /
• 2000

The copolymerization of ethylene (E) and norbornene (N) was examined by using various metallocene catalysts and modified-MAO(MMAO) cocatalyst. For $C_2$-symmetry catalysts such as rac-Et(Ind)$_2$ZrC $l_2$, M $e_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si(Cp)$_2$ZrC $l_2$ and Cs-symmetrical iPr(FluCp)ZrC $l_2$ as well as CGC and di-bridged zirconocene, the effects of catalyst structure and [N]/[E] feed ratio on catalyst activity, thermal property and [N] content of copolymer (COC) was investigated. For rac-Et(Ind)$_2$ZrC $l_2$ catalyst of a constant [N]/[E] feed ratio, the appropriate conditions of [Al]/[Zr] mole ratio, polymerization temperature and cocatalyst structure were found to be 3000, 4$0^{\circ}C$, MMAO cocatalyst, respectively. As [N]/[E] feed ratio increased, the incorporation of norbornene to copolymer increased while, the activity of catalyst decreased except for iPr(FluCp)ZrC $l_2$ With consideration of catalyst activity as well as N content, it was found that rac-Et(Ind)$_2$ZrC $l_2$/MMAO system exhibited relatively high activity and controllable $T_{g}$. Monomer reactivity ratio was determined by Kelen-Tudos method..

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.162-167
• /
• 1992

Tic and TiN layers were deposited on the stainless steel substrate by the reactive RF sputtering. Ar was used for sputtering gas and CzHz and Nz were used for reaction gas. Deposition rate increased linearly to the applied RF power, and decreased as the partial pressure ratio of sputter gas to reactive gas increased. The thin layers were stoichiometric at the partial pressure ratio of 0.03 for Tic and at partial pressure ratio of 0.05 for TiN. The morphologies and structures of the thin layers were investigated by AES, SEM and TEM. In addition, N+ ion was implanted to Tic and the resulting influence on the film and annealing effects were also examined.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.9
• /
• pp.1248-1255
• /
• 2009

This study was carried out to evaluate the fatty acid composition in Nellore cows supplemented with either linseed (n-3) or canola grains (n-6 and n-9). Fifteen Nellore cows, aged five years and bodyweight 550 kg${\pm}$48 kg, were randomly distributed to the following treatments: CON (control), LIN (linseed) and CAN (canola grains). The cows were fed for 80 days. The concentrations of C18:0, C18:2 n-6 and C20:3 n-6 fatty acid were higher (p<0.10) in CON blood plasma in comparison to follicular liquid. Likewise, PUFA, n-6 contents, PUFA:SFA and n-6:n-3 ratios were higher (p<0.10) in blood plasma. On the other hand, C18:1 n-9, C22:5 n-3, MUFA and n-3 contents were lower (p<0.10) in blood plasma. C18:0, C18:2 n-6, C18:3 n-3, C22:5 n-3, PUFA, n-6, n-3 contents and PUFA:SFA ratio were higher (p<0.10) in LIN blood plasma than in the follicular liquid. Nevertheless, C14:0, C16:0, C16:1 n-7, PUFA, C16:0, C18:1 n-9 and MUFA contents were lower (p<0.10) in LIN blood plasma. On treatment CAN, the C18:0 and SFA contents, and n-6:n-3 ratios were higher (p<0.10) in blood plasma. However, C20:3 n-6, C22:5 n-3, PUFA and n-3 contents were lower (p<0.10) in blood plasma. C16:0, C18:0, PUFA, SFA contents and PUFA:SFA ratio did not differ (p>0.10) among the treatments. C14:0, C16:1 n-7, C18:2 n-6 and n-6 contents were higher (p<0.10) for CON and CAN than LIN. C17:1 n-7, C20:4 n-6 and C 22:0 contents were higher (p<0.10) for CAN than CON and LIN. C18:1 n-9, C18:3 n-3, MUFA and n-3 contents were higher (p<0.10) for LIN and CAN than CON. C20:3 n-6 content and n-6:n-3 ratio were higher (p<0.10) for CON than LIN and CAN. C22:5 n-3 content were higher (p<0.10) for CON and LIN than CAN. The concentrations of fatty acids in blood plasma and follicular liquid were not correlated for any fatty acid, independent of the treatment studied. Canola grain added to the diet of Nellore cows resulted in increased concentrations of fatty acids n-6 and n-3 in follicular liquid.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.367-370
• /
• 2007

Numerous sets of simulation were conducted in order to find out the optimum operational conditions of the existing BNR process using GPS-X program. The model of ASM3 and modified Bio-P module were applied for simulations. From the result of this study, effluent quality was closely related with the step feeding rate and influent C/N ratio. The effluent TN concentration seemed to be significantly affected by step feeding rate at the low C/N condition. But at the high C/N condition, the effluent concentration of TP rather than that of TN was affected by the control of step feeding rate.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.335-346
• /
• 1997

Denitrification is one of the important processes of removing nitrate from in recirculating aquaculture systems. And this process is affected by many factors such as external organic carbon sources, hydraulic retention time (HRT), COD/NO3--N (C:N) ratio, etc. However, not many studies were done for the optimum conditions of denitrification in the recirculation system for aquaculture. Therefore, this study was conducted to find out the optimum removal condition of NO3--N using submerged denitrification biofilter. The combinations of two external organic carbon sources (glucose and methanol), two HRT (4 and 8-hour) and four differnent C : N ratios (3, 4, 5, 6) were tested. The removal efficiencies of NO3--N and total inorganic nitrogen (TIM) at 8-hour HRT were better than those at 4-hour's (P<0.05). The maximum removal efficiency of NO3--N by methanol (97.8%) was achieved at HRT and C : N ratio were 8-hour and 4.0 respectively. The efficiencies of methanol for the removal of NO3--N and TIN were always better than those of glucose (P<0.05). The maximum removal efficiencies of total inorgainc nitrogen (TIN) were gained at C : N ration of 5.0. The maximum removel efficiencies of TIN using methanol and glucose were 96.9% and 71.5% respectively. Anaerobic condition which is necessary for denitrification process was not made until the 8-hour HRT and higher C : N ratio (5.0). Removal of NO3--N at 4-hour HRT and C : N ration lower than 5.0 were inhibited by oxygen and/or low quantity of external organic carbon. Removal efficiencies of NO3--N were also inhibited by high C : N (6.0) ratio when HRT was 8-hour.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.207-210
• /
• 2000

Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHA) fram octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate concentration of the culture broth was maintained below 4 g/L by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above high limit. The effect of the ratio of octanoic acid to ammonium nitrate (C/N ratio) in the feed on the PHA production was examined. The final cell concentrations of 62.5, 54.7, and 9.5 g/L, PHA contents of 62.9, 75.1, and 67.6% of dry cell weight, and productivities of 1.03, 0.632, and 0.161 g/L/h were obtained when the C/N ratio in the feed were 10, 20, and 100 g octanoic acid/g ammonium nitrate, respectively.