• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.54-60
• /
• 1995

Cellulose(cell)/dimethylacetamide(DMAc)/lithium chloride(LiCl) solutions were prepared and spun to fibers in coagulants. Then, obtained fibers were annealed in appropriate chemicals. The fibers from cell/DMAc/LiCl showed cell III morophology prior to annealing without differenciating the kind of coagulants. Morphology of crystallite, however, was affected by annealing. Annealed fibers at 17$0^{\circ}C$ showed cell IV morphology and had better mechanical properties than others.

• Journal of Veterinary Clinics
• /
• v.15 no.1
• /
• pp.196-198
• /
• 1998

젊은 말과 그 관리인에게 발생한 Microsporum canis 감염에 의한 백선에 대해 보 고하였다. 말과 사람에 있어서의 진단은 피부 병변의 KOH 표본에서 피부사상균을 직접 증명 하고,감염된 인설의 순수 배양물로부터 Microsporum canis를 분리한 것에 근거를 두었다. 말과 사람에 서 분리하고, PHOL 염색액으로 염색한 Microsporum canis는 현미경으로 자세히 관찰했을 때 형태학 적인 차이를 나타내지 않았다. 말에 있어서 옥도정기와 사람에 있어서 miconazole에 의한 국 소 요법은 효과적이었다. 병력은 관리인이 말로부터 감염된 것을 제시하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.117-119
• /
• 2008

This study was investigated for the dyeing properties of silk fabrics with Annatto Extract. The dye stuff was extracted by distilled water at 60$^{\circ}C$, 10minutes, 100:1 of bath ratio. The highest K/S value was showed at 25% dye concentration, 60minutes of dyed time at 50$^{\circ}C$ in the temperature. The post mordant conditions were better than that of pre mordant, especially post-Fe mordant showed highest K/S value. The laundering fastness was relatively good by Cu-mordant. Drying cleaning fastness appeared 4-5 grades.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Journal of the Korean Society of Costume
• /
• v.49
• /
• pp.73-84
• /
• 1999

The purpose of this study was to investigate dyeing properties of silk and wool fabric by Cassia tora extracts according to the conditions such as extraction(temperature time) dyeing(temperature time) condition kinds of mordants temperature of mordanting. The color fastness of laundering irradiation were examined. The results were as follows: The wavelength of maximum absorpthion by extracts appeared at 201, 277, 382nm in UV-Vis spectrum. Absorbance of extracts were increased with temperature and time. The extraction efficiency of Cassia tora was determined as $95^\circ{C}$ of extraction temperature 120 minutes of extraction time. Silk fabric had highest K/S value when dyeing for 90min at $40^\circ{C}$. Wool fabric had highest K/S value when dyeing for 60min at $80^\circ{C}$. Surface color of silk and wool fabric dyed with Cassia tora extracts was 3,9Y and 0.4Y but it was changed from 9.3YR to 7,4Y and from 9.4YR to 5Y by mordants. The fabrics of mordanted by metal ion dyed the depth of color. Laundering and irradiation fastness of mordanted fabrics were improved as compared with nonmordanted fabrics.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.55-61
• /
• 2004

The Purpose or this study was to determine the optimal dyeing condition or Chelidonium majus extracts onto silk fabrics. Among the various dyeing properties, the colorfastness of fabrics dyed with Chelidonium majus extracts was investigated in different conditions such as dyeing temperature, dyeing time, dyeing pH etc. We also tried to dye fabrics using the Chelidonium majus extracts which were lyophilized. Although mordant was not used, dyed fabrics showed relatively good dyeability and the main pigment of Chelidonium majus showed yellow vividly in the appropriate dyeing conditions. At a dyeing temperature above 40$^{\circ}C$, the $\Delta$E value increased but the yellowish tint decreased. The pH value of unadjusted Chelidonium majus extracts was 6.4, at which a deep yellow was obtained. The dye equilibrium was reached 40 minutes after dyeing. The colorfastness to washing and light was poor at 1-2 and 2-3, respectively, but the dry-cleaning fastness was good at 4-5.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.144-146
• /
• 2008

첨단과학기술의 발달로 환경오염이나 자연파괴 등을 유발시킴으로써 이에 부응하여 다양한 기능이 부여된 소재들이 개발 되고 있어 천연성분을 이용한 패션상품들이 고부가치를 창출하고 있다. 본 실험에서는 Kumazasa를 충분히 건조시켜 키토산을 젖산 수용액에 용해시켜 면을 처리 하고 욕비 1:10으로 Kumazasa를 24시간 80$^{\circ}C$에 가열하여 얻은 추출액으로 염색하여 수세 및 건조하였다. 항균성은 황색포도당구균과 폐렴구균에 대한 항균성을 조사한 결과 모두 99.9%로 매우 우수한 항균성이 나타났다.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2003

Dyeing liquor was extracted from flowers, leaves and stems of balsamine. Dyeing properties, colorfastness and antibacterial activities of the fabrics dyed with the balsamine extracts were investigated at a variety of dyeing conditions of differing pH. time and temperature. Wool, silk and nylon fabrics showed better dyeability than cellulosic fabrics, i.e. cotton, linen and rayon. Especially, nylon fabrics showed the highest K/S values. The dye-uptake was achieved to the highest degree during the first ten minutes of dyeing procedure. All fabrics were dyed well at $40^\circ{C}$ with no pH adjustment. The pH of unadjusted balsamine extracts was 4.6. Their colorfastnesses to washing, drycleaning and perspiration were good as 4 or 4-5 grade. but the light fastnesses were poor as 1-2 grade. While, the antibacterial activities to Staphylococcus aureus and Klebsiella pneumoniae were excellent with 99.9% of colonies reduction ratio. Their excellent antibacterial activity was kept well after ten times washing.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.93-93
• /
• 2012

섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.