• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.435-440
• /
• 2009

19 Aromatic ring and L-amino acid ester contained rupestonic acid amide derivatives 2a~2l, 3a~3g were synthesized and preliminarily evaluated in vitro against influenza virus $A_3$,B and herpes simplex virus type 1 (HSV-1), 2(HSV-2) by the national center for drug screening of China. The rusults showed that 2i possessed the highest inhibition against both influenza virus $A_3\;(TC_{50}\;=\;120.6\;{\mu}mol/L,\;IC_{50}=\;19.2\;{\mu}$mol/L, SI = 6.3) and B (T$C_{50}\;=\;120.6\;{\mu}mol/L,\;IC_{50}=\;29.9\;{\mu}$mol/L, SI = 4.0); 2g was more active against influenza $A_3$ virus at very low cytotoxicity ($TC_{50}\;>\;2092.1\;{\mu}mol/L,\;IC_{50}=\;143.7\;{\mu}mol/L,$ SI > 14.6) than the parent compound; Compounds 2b, 2c, 2f showed higher activities both against HSV-1 and HSV-2 than that of the parent compound, and 2f was the most potent inhibitor of HSV-1 ($TC_{50}\;=\;200.0\;{\mu}mol/L,\;IC_{50}\;=\;11.3\;{\mu}mol$/L, SI = 17.7 ) and HSV-2 ($TC_{50}\;=\;200.0\;{\mu}mol/L,\;IC_{50}\;=\;20.7\;{\mu}mol$/L , SI = 9.7).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.47-52
• /
• 2017

In this paper, CMOS SAR A/D converter 1.8V supply for the design of an A/D converter having an middle speed for the biological signal processing was designed. This paper proposes design of a 10-bit SAR Analog to Digital Converter improving linearity driven by MSB node of C-DAC array divided into 4 equal parts. It enhances linearity property, by retaining the analog input signal charging time at MSB node. Because MSB node samples analog input, it enhances resolution through getting initial input signal precisely. By using split capacitor on C-DAC array, it reduced chip size and power dissipation. The Proposed SAR A/D Converter is fabricated in 0.18um CMOS and measured 7.5 bits of ENOB at sampling frequency 4MS/s and power supply of 1.8V. It occupies a core area of $850{\times}650um^2$ and consumes 123.105uW. Therefore it results in 170.016fJ/step of FOM(Figure of Merit).

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.659-669
• /
• 2023

The purpose of this study is to predict the pressure drop due to the installation of venturi under diverse operating conditions such as dust concentration, pulse interval and pressure, and filtration velocity using algebraic-linear regression model and use it as an economic data and efficient operating condition for a pulse air jet bag filter. A pilot scale bag filter with a filter a filter size(Ø140 × 850ℓ, 12) was used, and the filters used in the experiment were the polyester filters most commonly used in real industrial sites. The SAS 9.4 program (SAS Institute, USA) was used to predict and to determine the effects of inlet concentration (C_i), pulse interval (P_i) and pressure (P_p), filtration velocity (V_f), presence or absence of venturi, etc. The results are shown below. The variation in pressure drop with or without venturi installation was 38.8 mmAq when venturi is installed and 47.6 mmAq when venturi is not installed, indicating a difference in pressure drop of 8.8 mmAq depending on venturi installation. It is estimated that the efficiency can be improved by about 18.5% if the venturi is installed.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.655-660
• /
• 1999

Sphingomyelinase (SMase EC:3.l.4.l2) has been suggested to play important roles in the cell cycle, differentiation, apoptosis, inflammation, and the regulation of eukaryotic stress responses. SMase inhibitors may be a powerful tool to elucidate and regulate these cellular responses in which SMase involves. We first isolated an SMase inhibitor, named sphinin, from a strain of soil actinomycetes, F50970. Sphinin inhibited Mg/sup 2+/ -dependent neutral SMase from chicken embryo at 1.2 ㎍/㎖ of IC/sub 50/ Sphinin also inhibited acidic SMase, but it had no inhibitory activity on PI-PLC and PC-PLC, suggesting that sphinin is a specific inhibitor of SMase. The strain F50970 was identified as a Streptomyces sp. by its spiral spore chain, LL-diaminopimelic acid, menaquinone patterns of MK-9 (H'6) and MK-9 (H'8), FA-2c type of fatty acid pattern, and other morphological, physiological, and cultural characteristics.

• Steel and Composite Structures
• /
• v.17 no.2
• /
• pp.173-184
• /
• 2014

This study aimed to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites. The analytical solution of residual stress field distribution was obtained by using coaxial cylinder model, and the numerical solution was obtained by using finite element model (FEM). Both of the above models were compared and the thermal residual stress was analyzed in the axial, hoop, radial direction. The results indicated that both the two models were feasible to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites, because the deviations between the theoretical calculation results and the test results were less than 8%. In the titanium matrix composites, along with the increment of the SiC fiber volume fraction, the longitudinal property was improved, while the equivalent residual stress was not significantly changed, keeping the intensity around 600 MPa. There was a pronounced reduction of the radial residual stress in the titanium matrix composites when there was carbon coating on the surface of the SiC fiber, because carbon coating could effectively reduce the coefficient of thermal expansion mismatch between the fiber and the titanium matrix, meanwhile, the consumption of carbon coating could protect SiC fibers effectively, so as to ensure the high-performance of the composites. The support of design and optimization of composites was provided though theoretical calculation and analysis of residual stress.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.117-129
• /
• 1981

An experiment with the tobacco plant was conducted in the pots. A sandy humic soil was used with 2 levels of pH, 3.5 and 5.8 with 2 kinds of anions, Cl as $NH_4Cl$ and $SO_4$ as $(NH_4)_2SO_4$, and with 4 levels of pF, 1.5, 2.0, 2.5, and 3.5. The pH-treatment created different N-forms; $NH_4$ at low pH(3.5) and $NO_3$ at high pH (5.8). The results are summarized as follows: 1. At low pH (3.5) with high concentration of $NH_4$ given as $NH_4Cl$, the high content of $NH_4$ and Cl in tobacco resulted in plants suffering from $NH_4$ and Cl toxicity as well as Mn toxicity. As a result of these toxicity, an extremly abnormal growth of tobacco was clearly appeared. In the tobacco grown at low pH with $NH_4$ given as $(NH_4)_2SO_4$, a large amount of the $NH_4$ uptake developed Mg and Ca deficiencies. $NH_4-N$, which had been applied to the soil of high pH (5.8), was almost completely transformed into $NO_3-N$ by nitrification and, on this low acidic soil, the plants were all healthy regardless of Cl or $SO_4$ added together with $NH_4-N$. However, dry matter production was higher and maturity faster when $SO_4$ was used as anion than when Cl was used. 2. High moisture content in soil, to some extent, is necessary for a good development and growth of the tobacco plant. Phosphate uptake seemed to be limited at higher moisture stress. The dry matter yield of tops and roots of tobacco were in the order of pF 1.8 > 2.1 > 2.6 > 3.6, respectively. 3. Data of chemical analysis and dry matter yields of tops and roots showed that the tobacco plant followed the normal (C-A) concept. In the normal growth of plants, the carboxylate content of tops was quite comparable to the estimated (C-A) values. If $NH_4$ content of plants remains in quite high quantities, it must be analysed and taken into consideration for the (C-A) calculation. Al is not transported toward tops in toxic amounts due to its high immobility, it mostly stay in or on the roots, probably due to precipitation as a aolt. When Al is present in high quantities, it has to be considered into the (C-A) calculation.

• Journal of Ginseng Research
• /
• v.35 no.3
• /
• pp.344-351
• /
• 2011

Ginsenoside $Rb_1$ is the main component in ginsenosides. It is a protopanaxadiol-type ginsenoside that has a dammarane-type triterpenoid as an aglycone. In this study, ginsenoside $Rb_1$ was transformed into gypenoside XVII, ginsenoside Rd, ginsenoside $F_2$ and compound K by glycosidase from Leuconostoc mesenteroides DC102. The optimum time for the conversion was about 72 h at a constant pH of 6.0 to 8.0 and the optimum temperature was about $30^{\circ}C$. Under optimal conditions, ginsenoside $Rb_1$ was decomposed and converted into compound K by 72 h post-reaction (99%). The enzymatic reaction was analyzed by highperformance liquid chromatography, suggesting the transformation pathway: ginsenoside $Rb_1$ ${\rightarrow}$ gypenoside XVII and ginsenoside Rd${\rightarrow}$ginsenoside $F_2{\rightarrow}$compound K.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.694-700
• /
• 1997

TiC(001) 면위에 Mg 금속을 단원자층으로 증착시킨 후 산화 및 열처리 과정을 거쳐서 MgO 초박막을 성장시키고, 성장된 MgO 막의 전자상태 및 표면포논을 UPS, XPS 및 HREELS를 사용하여 측정하였다. 전도성 기판위에 epitaxial 산화물막을 성장시킨 후 성장된 막의 전자구조 및 표면포논을 측정함으로써 벌크에서 분리된 2차원적 특성을 갖는 '표면 모델'의 물성을 연구하고자 하였는데, 이러한 '표면모델'은 잘 배열된 원자구조를 얻을 수 있고 두께가 충분히 얇아서 전하축적을 피할 수 있기 때문이다. 기판으로는 MgO와 같은 암염형 결정구조를 갖고 있고, 격자상수 차이가 2.6% 로서 매우 작으며, 비저항이 매우 낮은 전이 금속 탄화물 중의 하나인 TiC(001) 면을 사용하였다. TiC(001)면에 증착된 MgO층의 UPS He-l 스펙트럼을 측정한 결과 O2p및 XPS스펙트럼은 열처리를 전후로 하여 변하지 않았으며, 이로부터 상온에서 산소의 확산만으로 MgO 상이 형성됨을 알 수 있었다. MgO초박막의 표면 포논을 HREELS를 사용하여 검출하였다. 거시적 포논중에서 F-K 파 및 Rayleigh 모드가 관찰되었는데, F-k파는 MgO막의 2차원성으로 인하여 벌크의 경우보다 높은 진동 에너지를 갖고 있었고 Rayleigh모드는 벌크 MgO와 유사한 분산관계를 보였다. 미시적 포논중에서 Wallis(S/sub 2/)모드가 측정되었는데, 그 진동에너지는 벌크에서와 같고 off-specular방향에서도 소멸되지 않았다.

• Journal of applied mathematics & informatics
• /
• v.8 no.2
• /
• pp.429-437
• /
• 2001

In [1, 2], described a Chebyshev series method for the numerical solution of integral equations with three automatic algorithms for computing tow regularization parameters, C/sub f/ and r. Here we describe a Fourier series expansion method for a class singular integral equations with Hilbert kernel and constant coefficients with using a new automatic algorithm.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.70-79
• /
• 2002

This study was conducted to determine correlations and combining abilities of leaf lengths, leaf widths, petiole lengths, number of branches, number of leaves, leaf areas, fresh weights, dry weights and number of flowers in F₁ crosses made with the partial seven-parent diallel cross in Viola tricolor. Leaf lengths and leaf widths showed highly positive correlation with petiole length and negative correlation with number of branches, number of leaves and number of flowers. There was positive correlation between the number of leaves and flowers as well as between leaf area and fresh weight. Mean squares of general combining ability(GCA) and specific combining ability(SCA) were highly significant for all the parameters. Variance component values of SCA were greater than those of GCA for all the parameters except leaf length, implying preponderance of non-additive gene actions for these characters. The lines C and G for leaf lengths and widths, the lines A and F for number of leaves, the lines A, B and G for leaf areas, and the lines B and F for number of flowers showed relatively high GCA effects. The crosses of A×B and B×D exhibited high SCA effects on increasing leaf lengths, leaf widths, number of leaves, fresh weights and number of flowers. And also the crosses of B×E and D×G exhibited high SCA effects on decreasing leaf lengths, leaf areas and fresh weights as well as increasing number of flowers. The broad sense heritabilities of most characters were high compared with the narrow sense one. Those of leaf length, leaf width, petiole length and number of leaves were high in both the broad and narrow sense heritabilities.