• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.1
• /
• pp.37-48
• /
• 2004

The purpose of this study was to evaluate adaptability of external carbon source using GPS-X program in pilot plant composed with 2-stage denitrification process. The result from analysis of pilot plant operation and GPS-X simulation showed that effluent concentration could be simulated similarly by modifying operation conditions, such as DO concentration, C/N ratio and other calibrated parameter. In order to satisfy the standard of the effluent water quality on T-N of 20mg/L, it required approximately 3.1 of C/N ratio and 50% of nitrogen removal efficiency when influent T-N is 36.9mg/L. To maintain the stable water quality of the receiving water, the effluent T-N concentration should be less than 10-15mg/L and the appropriate C/N ratio to remove nitrogen was 4.27-6.82. The analysis of sensitivity to kinetic coefficient and reaction constant showed that $Y_H$ and ${\mu}_{mAUT}$ were most sensitive to nitrate and ammonia nitrogen, relatively and sensitivity coefficient of their were 1.32, 1.98. It was concluded that as $Y_H$ decreased and ${\mu}_{mAUT}$ increased, the reaction rates of denitrification and nitrification increased and the removal efficiencies of $NO_3{^-}-N$ and $NH_4{^+}-N$ improved.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.322-324
• /
• 2003

Leaf C:N ratio is a new factor in the field of biochemical inversion with hyperspectral data. Effects of common-used spectral transformations including log(R), log(1/R), 1/R, etc. from 400nm to 2490nm on its inversion are compared. Results show that their effects on statistical modeling are not apparent. Continuum removal is used on original reflectance in the range of 2030nm to 2220nm, in which exists an apparent absorption peak due to cellulose, lignin, protein, etc. The effect is distinctive and tends to improve the precision of C:N ratio inversion. Further, it is a robust and physically based transformation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.535-541
• /
• 2005

It has been suggested that the endoscopic color of intramucosal gastric carcinoma is correlated with mucosal vascularity within the carcinomatous tissue. The development of electronic endoscopy has made it possible to quantitatively measure the mucosal hemoglobin volume, using a hemoglobin index. The aim of this study was to make a software program to calculate the hemoglobin index (IHb) and then investigate whether the mucosal IHb determined from the electronic endoscopic data is a useful marker for evaluating the color of intramucosal gastric carcinoma, in particular with regard to its value for discriminating between the histologic type. The mean values of IHb for the carcinoma (IHb-C) and the mean values of IHb for the surrounding non-cancerous mucosa ( IHb-N) were calculated in 75 intestinal-type and 34 diffuse-type gastric carcinomas. Then, we analyzed the ratio of the IHb-C to IHb-N. The mean IHb-C/IHb-N ratio in the intestinal-type carcinoma group was higher than that in the diffuse-type carcinoma group ($1.28{\pm}0.19$ vs. $0.81{\pm}0.18$, respectively, p<0.001). When the cut-off point of the C/N ratio was set at 1.00, the accuracy rate, the sensitivity, the specificity, and the positive and negative predictive values of a C/N ratio below 1.00 for the differential diagnosis of diffuse-type carcinoma from intestinal-type carcinoma were $94.5\%$, $94.1\%$, $94.7\%$, $88.9\%$ and $97.3\%$, respectively. IHb is useful for quantitative measurement of the endoscopic color in intramucosal gastric carcinoma and the IHb-C/IHb-N ratio would be helpful in distinguishing diffuse-type carcinoma from intestinal -type carcinoma.

• Journal of Environmental Science International
• /
• v.7 no.1
• /
• pp.96-103
• /
• 1998

To study the optimum conditions of composting with industrial wastewater sludge, the variations of temperature and $CO_2$ generation amount during the composting periods were investigated. The conditions were that industrial wastewater added to bulking agents such as sawdust and rice hull was used, and differently treated with microorganism seeding or not, initial C/N ratios, air flow rate and initial moisture contents, respectively. The results were summarized as follows : Seeding 5% of microorganism was higher the temperature than not seeding. And using sawdust as bulking agents, and adjusting 30~40 of Initial C/N ratio, 200ml/l.min. of k flow rate and 67~68% moisture contents were higher the temperature than any other conditions. Seeding 5% of microorganisms was higher $CO_2$ generation amount than not seeding. And that was much in the order of 7~40, 30~34 and 22~23 of initial C/N ratio. Judging from the results, it should be considered that the optimum conditions in the composting of industrial wastewater sludge were seeding of 5% microorganisms, and adjusting 30~34 of Initial C/N ratio, 200ml/l min. of air flow rate and 67~68% of Intitial moisture contents. The contents of inorganic matters and C/N ratio during the composting periods at optimum condition were a little Increased. and heavy metals contents after composting were lower than standard for fortllizer.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.16-21
• /
• 2005

The effect of additive composition, using AlN and $Er_{2}O_{3}$ as sintering additives, on the mechanical properties of liquid-phase-sintered, and subsequently annealed SiC ceramics was investigated. The microstructures developed were quantitatively analyzed by image analysis. The average thickness of SiC grains increased with increasing the $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio in the additives whereas the aspect ratio decreased with increasing the ratio. The mechanical properties versus $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio curve had a maximum; i.e., there was a small composition range at which optimum mechanical properties were realized. The best results were obtained when the ratio ranged from 0.4 to 0.6. The flexural strength and fracture toughness of the SiC ceramics were $550\~650\;MPa$ and $5.5\~6.5$ MPa${\cdot}m^{1/2}$, respectively.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.74-81
• /
• 2012

Decay rate and nutrient dynamics during leaf litter decomposition of deciduous Quercus acutissima and evergreen Quercus mysinaefolia were studied for 24 months from December 2008 to December 2010 in Gongju, Chungnam Province, Korea. Percent remaining weight of Q. acutissima and Q. mysinaefolia leaf litter after 24 months elapsed was $46.3{\pm}5.4%$ and $37.8{\pm}2.5%$, respectively. Decomposition of evergreen Q. mysinaefolia leaf litter was significantly faster than that of deciduous Quercus acutissima leaf litter. Decay constant(k) of Q. acutissima and Q. mysinaefolia leaf litter after 24 months elapsed was 0.38 and 0.49, respectively. Initial C/N and C/P ratio of Q. mysinaefolia leaf litter was significantly lower than those of Q. acutissima leaf litter. Initial C/N and C/P ratio of Q. acutissima leaf litter was 46.8 and 270.9, respectively. After 24 months elapsed, C/N and C/P ratio of decomposing Q. acutissima leaf litter decreased to 22.5 and 104.2, respectively. Initial C/N and C/P ratio of Q. mysinaefolia leaf litter was 22.4 and 41.7, respectively. After 24 months elapsed, C/N and C/P ratio of decomposing Q. mysinaefolia leaf litter decreased to 16.7 and 89.7, respectively. Initial concentration of N, P, K, Ca and Mg in leaf litter was 8.31, 0.44, 4.18, 9.38, 1.37 mg/g in Q. acutissima, and 19.88, 2.73, 7.06, 8.24, 2.61 mg/g in Q. mysinaefolia, respectively. Initial concentration of N and P in Q. mysinaefolia leaf litter was significantly higher than those in Q. acutissima. After 24 month elapsed, remaining N, P, K, Ca and Mg were 100.91, 114.75, 32.99, 50.63, 15.51% in Q. acutissima, and 43.22, 11.35, 12.98, 82.22, 44.23% in Q. mysinaefolia, respectively. N and P in decomposing leaf litter was immobilized in Q. acutissima, and mineralized in Q. mysinaefolia.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.6
• /
• pp.538-543
• /
• 2006

A packed bed reactor (PBR) was fed with nitrate containing synthetic wastewater or effluent from a sequencing batch reactor used for nitrification. The C source introduced into the PBR consisted of volatile fatty acids (VFAs) produced from anaerobic acidogenesis of food wastes. When nitrate loading rates ranged from $0.50\;to\;1.01\;kg\;N/m^{3}{\cdot}d$, the PBR exhibited $100{\sim}98.8%\;NO_{3}^{-}-N$ removal efficiencies and nitrite concentrations in the effluent ranged from $0\;to\;0.6\;NO_{2}^{-}-N\;mg/L$. When the PBR was further investigated to determine nitrate removal activity along the bed height using a nitrate loading rate less than $1.01\;kg\;N/m^{3}{\cdot}d$, 100% nitrate removal efficiency was observed. Approximately 83.2% nitrate removal efficiency was observed in the lower 50% of the packed-bed height. When reactor performance at a C/N ratio of 4 and a C/N ratio of 5 was compared, the PBR showed better removal efficiency (96.5%) of nitrate and less nitrite concentration in the effluent at the C/N ratio of 5. VFAs were found to be a good alternative to methanol as a carbon source for denitrification of a municipal wastewater containing 40 mg-N/L.

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.347-356
• /
• 1992

Various kaolin samples with different alumina content were prepared from calcined admixture of kaolin and ammonium sulfate by varying the treatment time in sulfuric acid. Samples were nitridated under N2 or N2-H2 atmosphere with changing the amount of added carbon, the reaction time and temperature. As the alumina content lowered, the size of kaolin particles decreased and the specific surface area increased. XRD analysis indicated that ${\alpha}$-quartz remained by decomposition of halloysite and meta-halloysite. Experimental results of nitridation behavior are summerized as follows; 1) Nitridation under N2 atmosphere. With the increase of C/SiO2 ratio and with the decrease of Al2O3 content, disappearance of XRD pattern peaks of mullite, ${\alpha}$-quartz and ${\alpha}$-Al2O3 were accelerated at 1300$^{\circ}C$. SiC was the main phase in the reaction product of acid-treated kaolin samples nitridated at 1300$^{\circ}C$ for 10 hours regardless of C/SiO2 ratio. But the XRD peak intensities of ${\beta}$-Si3N4, ${\beta}$-sialon and SiC did not show much difference when untreated raw kaolin was fired at the same condition. When the ratio of C/SiO2 was 3.5, ${\beta}$-sialon and ${\beta}$-Si3N4 existed in the reaction product of about 22% alumina containing kaolin sample fired at 1350$^{\circ}C$ for 7 hours. Only ${\beta}$-sialon existed in the same sample fired at 1400$^{\circ}C$ for 10 hours. ${\beta}$-sialon was obtained from all of the acid-treated kaolin samples fired at 1400$^{\circ}C$ for 40 hours, but AlN and SiC remained in the untreated kaolin sample. Z value of the ${\beta}$-sialon obtained from the 22% alumina containing kaolin sample fired at 1400$^{\circ}C$ for 40 hours was about 1.3(XRD) and 1.5(EDS). 2) Nitridation under 80N2+2OH2 mixed gas atmosphere with the C/SiO2 ratio of 1 Mullite was not found, but ${\alpha}$-Si3N4, and ${\beta}$-sialon were present in the reaction product of about 22% alumina containing kaolin sample fired at 1300$^{\circ}C$ for 10 hours. When untreated kaolin sample was nitridated at the same condition, mullite remained. AlN and SiC were not found in the reaction product of about 22% alumina containing kaolin sample fired at 1350$^{\circ}C$ for 5 hours. On the other hand, AlN and SiC remained in the product of untreated kaolin fired at the same condition.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.363-366
• /
• 2001

This study was to investigate the effects of media components on the mycelial growth of Lentinus eclodes, including C-source. N-source, Inorganic salts, and c/N ratio. Glucose and yeast extract were selected as C-source and N-source, respectively. $KH_2PO_4,\;K_2HPO_4,\;MGSO_4,\;7H_2O$ as inorganic salts were added. When glucose concentration was 30g/L and yeast extract concentration was 20g/L, indicating that C/N ratio was 1.5, the cell mass was about 9g/L.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.64-65
• /
• 2005

The structural and electrical properties of the films are investigated as a function of nitrogen/argon ratio at room temperature and at various deposition temperatures. The phase changes as $Ta_2N$ or TaN in the films were observed as nitrogen/argon ratio increases from 3% to 25%. The phase changes were associated with a change in the resistivity and TCR (temperature coefficient of resistance) of the films. TCR values of the films deposited at room temperature and different nitrogen contents were negative, and strongly decreased with the increase in nitrogen/argon ratio. The Ta2N films deposited at nitrogen/argon ratio of 3% show improved TCR values and thermal stability with increasing deposition temperature. The $Ta_2N$ films grown at nitrogen/argon ratio of 3% and the temperature of $200^{\circ}C$ showed a TCR value of -47 $ppm/^{\circ}C$, which is close to near-zero TCR in the range of deposition temperature.