• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1594-1596
• /
• 1997

$LiMn_2O_4$ is prepared by reacting stoichiometric mixture of LiOH $H_2O$ and $MnO_2$ (mole ratio 1 : 2) and calcinating at $800^{\circ}C$ for 24h, 36h, 48h, 60h and 72h. At X-ray diffraction, cathode active materials calcined at $800^{\circ}C$ for 36h. (111)/(311) peak ratio was 0.37. It was that crystal structure is formed very well. In the result of charge/discharge test, when heated at $800^{\circ}C$ for 36h, charge/discharge characteristics of $LiMn_2O_4$ is the best and Super-s-black sort of conductive agent showed well property. Also, AC impedance creased gradually during cycling and stabilized after 10cycle.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.311-324
• /
• 2010

The purpose of this study aims to reveal characteristics of reproduced potteries which made with clays of various chemical compositions in different firing temperatures and thereafter to provide comparative samples for identifying the manufacturing techniques of earthenwares from archaeological excavation by reproducing and characterizing sample under controlled conditions. For this study, various samples of earthenware are reproduced using different types of raw clays at several different firing temperature, followed by physical and structural characterization. Chemical specification were varied from different types of clay, which were calculated by Seger formula, and four different types of clay were selected based on different mole ratio of acidic oxide. The temperatures of firing of 7 samples were varied between $600^{\circ}C$ to $1200^{\circ}C$ at the interval of $100^{\circ}C$ for each sample. The result of analysis revealed that each reproduced earthenware has different chemical compositions divided into two groups: 1. Sample Y(6.10) and Sample G(5.85) clay; 2. Sample H(3.41) and Sample S(2.85) clay. The former which has higher mole ratio of acidic oxide than the latter, shows higher level of rockwell hardness at the same firing temperature. In addition, all four samples presented that as the firing temperature was increased, absorption rates of Y and G were abruptly dropped at $1200^{\circ}C$. Furthermore the more mole ratio of acidic oxide increase, the more microtexture of samples were vitrificated. Such result reveals that mole ratio of acidic oxide influence physical and microtextural characteristics of earthenwares, and it can be used as the comparison data in the understanding of manufacture techniques for the earthenwares of similar chemical composition.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.2
• /
• pp.193-204
• /
• 1984

The enzymatic properties of the alkaline AL-protease, which had been prepared from the crude zymolyase of Arthrobzoter luteus, was investigated together with its active amino acid residue. Complete inactivaton of the proteolytic activity of AL-protease by either DFP or PMSF was simultaneously accompanied by the loss of its lytic effect on the lysis of yeast cell wall. In the reaction, AL-protease showed the pattern of inactivation to decrease very slowly, as compared to that of chymotrypsin, and that enzyme and DFP were found to react with a molar ratio of 1 : 1. The preparation of AL-protease exhibited no hydrolytic activity in any substrates of polysaccharases, playing a significant role in the lysis of yeast cell wall. The optimum pH and temperature of AL-protease was pH 10.5 and $65^{\circ}C$, respectively. It also showed stability in the pH range from 5 to 11 and at the temperature below $65^{\circ}C$. Through the identification of the amino acid residue in the active site of the $^{32}P$-diisopropylph-osphorylated(DIP) AL-protease modified specifically with $^{32}P$-labeled DFP, AL-protease was found to be a DFP-sensitive which has a mole of active serine residue involved in its proteolytic activity per mole of the enzyme.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).

• Membrane Journal
• /
• v.12 no.4
• /
• pp.247-254
• /
• 2002

In order to develop the ion exchange membranes which would be used in direct methanol fuel cell (DMFC), the polysulfone polymer was sulfonated using chlorosulfonic acid (CSA) and trimethylchlorosilane(TMCS). It has been characterized in terms of ion conductivities, methanol crossover, swelling degree and ion exchange capacities for the heat untreated and treated membranes at $150^{\circ}C.$ Typically, the methanol permeability and ion conductivity at the mole ratio of 1.4 between polysulfone repeating unit and sulfonating agents showed $2.87{\times}10^{-7}\; cm^2/s$(without heat treatment), $1.52{\times}10^{-7}\; cm^2/s$(with heat treatment) and $1.10{\times}10^{-2}\; S/cm$(without heat treatment), $0.87{\times}10^{-2}\;$ S/cm(with heat treatment), respectively. After the mole ration of 1.4 both values indicated mild increase.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1059-1060
• /
• 2006

The creep behavior of Al-5vol.% SiC composite was investigated. The composite powder was produced by mechanical milling and hot extruded at $450^{\circ}C$ at ratio of 16:1. A creep test was carried out at a constant load at 598, 648, and 673 K. Using the steady-state equations, the threshold stress and the stress exponent of the creep as a function of temperature were determined. The stress exponent was found to be 3 at the temperature of 673 K and 8 at 598 and 648 K. The dependency of the threshold stress to temperature obeys the Arrhenius relationship with the energy term of $29\;kJ\;mole^{-1}$.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.123-140
• /
• 2013

The Dangdu Pb-Zn deposit is located at approximately 10 km south of Jecheon, Korea. Geology of Dangdu deposit area consists of Pre-cambrian metamorphic rocks, Ordovician sedimentary rocks, Jurassic and Cretaceous igneous rocks. The ore deposit is developed along the fracture trending $N20{\sim}40^{\circ}W$ in Ordovician limestone and is considered to be a skarn type ore deposit. The shape of ore bodies developed in the Dangdu ore deposit can be divided into lens-form(two ore bodies of -30 m level adit and one ore body of -63 m level adit) and pocket-form developed in -30 m level adit. Ore minerals observed in the ore deposits are magnetite, pyrrhotite, pyrite, chalcopyrite, sphalerite, galena, cosalite, marcasite, hessite, native Bi and bismuthinite. Chemical composition of sphalerite ranges FeS 14.14~18.08 mole%, CdS 0.44~0.70 mole%, MnS 0.52~1.13, 1.53~2.09 mole%. Galena contains a small amount of silver with an average of 0.54 wt.%. An average composition of cosalite is Ag 2.43 wt.%, Bi 44.36 wt.%, Pb 35.05 wt.% which results the chemical formula of cosalite as $Pb_{1.7}Bi_{2.1}Ag_{0.2}S_5$. Skarn minerals consist of epidote, garnet, pyroxene, tremolite, quartz and calcite. The zoning pattern of the ore deposit can be subdivided into epidote-clinopyroxene zone, epidote-clinopyroxene-chlorite zone and epidote-garnet-clinopyroxene zone from the central part of the ore body towards the wall rocks. The chemical composition of garnet shows an increasing trend of grossular from epidote-clinopyroxene zone to epidote-garnet-clinopyroxene zone. Clinopyroxene occurs as a solid solution of diopside and hedenbergite, and the ratio of johannsenite increases from epidote-clinopyroxene zone to epidote-clinopyroxene-chlorite and epidote-garnet-clinopyroxene zones. The mineralization of the ore deposit is considered to be one stage event which can be separated into early skarn mineralization stage, middle ore mineralization stage and late low temperature mineralization stage. The temperature estimation from the low temperature mineralization range from $125{\sim}300^{\circ}C$ which is considered to be representing the temperature of late mineralization.