• 태양에너지
• /
• 제19권4호
• /
• pp.45-53
• /
• 1999

본 논문은 태양열을 구동원으로 하고 액체흡수제인 염화리튬(LiCl) 용액을 이용하여 제습/냉방 및 난방을 하나의 시스템으로 이루는 태양열 이용 냉난방 공조시스템 중 여름철 전열교환기의 제습/냉방에 관한 성능실험 결과이다. 여름의 고온다습한 실내공기는 휀에 의해 전열교환기로 유입되어 충진층에서 살수된 LiCl 용액과 직접 접촉하여 제습/냉각된 후, 건조공기로 바뀌어 실내로 취출된다. 한편 수분을 흡수하여 저농도 용액으로 변한 LiCl 용액은 재생기에서 태양열에 의해 다시 고농도 용액으로 바뀌어 흡수포텐셜을 갖는다. 본 실험에서는 형상 및 크기가 다른 3가지 충진재를 사용하여 전열교환기의 제습성능을 비교하였으며, 절대습도기준 총괄 물질전달계수인 $k_xa(kg/m^3h{\Delta}x)$로써 그 성능을 평가하였다. 특히 $k_xa$값은 액체흡수제 유량, 공기 풍량, 충진재 형상 및 충진층 높이에 따라 변한다. 따라서 이에 대한 영향을 조사하기 위하여 여러 가지 실험한 결과, 풍량은 $k_xa$값에 미치는 영향이 컸으나, 유량은 그다지 영향을 미치지 않음을 알 수 있었다. 또한 충진재의 형상에 따른 비교 실험에서 충진재의 직경이 큰 경우에는 충진층 높이의 영향이 컸으나, 직경이 작은 경우에는 높이에 의한 영향이 직경이 큰 경우보다 작았다. 이상의 실험 결과로부터 $k_xa$값을 충진재 형상 및 충진층 높이에 따라 정지하면 최적 전열교환기 설계 및 제작에 기초자료로 활용할 수 있음을 알았다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 추계학술대회 논문집
• /
• pp.157-161
• /
• 1999

본 연구에서 직물의 열, 수분 전달특성과 KES-FB의 역학적 특성치, 직물표면의 fractal dimension을 측정하여 주관적 의복 착용 쾌적감을 예측하고자 하였다. 실험의복에 사용된 직물은 면 100% 평직물, 면/PET 혼방직물, 피치가공된 면/PET 혼방직물, PET 100% 평직물, 알칼리 감량가공된 PET 100% 크레이프 직물이었으며, 실험의복의 형태는 긴 소매 셔츠로 하였다. 착용실험은 온도 29$\pm$0.5$^{\circ}C$, 상대습도 75$\pm$2%RH, 기류 0.15m/s를 유지하는 항온항습실에서 실시하였고 36명의 여성 피험자(20-23세)들이 참여하였다. 의복 착용감의 하위 구성차원을 파악하기 위해 실험결과를 요인분석한 결과 5 개의 요인으로 추출되었다. 제 1 요인은 체온상승, 수분특성과 관련이 있는 온열.발한감이었으며, 제 2 요인은 무게ㆍ두께감, 제 3 요인은 회복특성감, 제 4 요인은 표면접촉감, 제 5 요인은 온냉감으로 구성되었다. 직물의 표면특성을 정량화하는 방법으로 도입한 fractal dimension 의 분석값들과 종래의 가장 보편적으로 이용되어 온 KES_FB 의 표면 특성치들이 주관적 착용쾌적감 예측에 얼마나 기여하는지 비교해 본 결과, 표면접촉감은 fractal dimension, 접촉점들의 총면적, 접촉점들의 평균 axis ratio, MMD, SMD와 높은 상관을 나타내었다. 또한 종합적 착용쾌적감에 대해서는 SMD 를 제외한 척도들이 유의한 상관을 보였으며, 그 중에서도 fractal dimension 과 접촉점들의 총면적은 0.8 이상의 높은 상관을 나타내었다. 착용쾌적감을 예측하기 위한 회귀분석결과에서는 fractal dimension 만으로 쾌적감의 74%가 설명되었으며 공기 투과도를 첨가하면 두 변수로 $R^2$=.792가 되었다. 설명되는 누적분산값은 67.18%였다.주관적 평가의 결과와 객관적 평가 결과를 이용해 마직물의 태를 평가하는 산출식을 제시하였다. 태 평가치의 경우 16가지 특성치를 모두 넣는 방법과 stepwise 방법, 또 Kawabatark 사용한 순차적 군 회귀법의 세가지 방법의 회귀식 중 16가지 특성치를 모두 넣는 방법의 결정계수가 가장 높았다.tosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into the origin of the letter designs in t

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Current Research on Agriculture and Life Sciences
• /
• 제14권
• /
• pp.101-110
• /
• 1996

Jar fermentor 배양에서 S. chibaensis J-59로 부터 포도당 이성화효소의 최적 생산조건을 확립하기 위하여 반응표면분석을 이용하였다. 실험계획은 중심계획합성법을 이용하였고, 3가지 실험요인으로는 공기주입량(vvm), 교반속도(rpm), 포도당의 농도(%)로 선별하였다. 요인실험의 결과로 회귀계수를 산출한 후 반응표면 회귀식을 구하였다. 효소 생산량의 변화에 대한 회귀식의 결정계수(R2)는 0.9776이였고, 분산분석의 F-ratio가 12.487이었으며, 이때 유의성(Prob>F)은 5% 이내로 인정되었다. 능선분석 결과, 효소생산 최대값은 공기주입량 2.227vvm, 교반속도 587.5rpm, glucose 농도 0.586%로 나타났으며 이때 반응표면 회귀식에 의해 추정하는 예상 효소활성은 7.67 단위로 나타났다. Jar fermentor 배양에서의 최적화 회귀식에 따라 1% birchwood xylan, 1.5% CSL, 0.1% $MgSO_4{\cdot}7H_2O$, 0.012% $CoCl_2{\cdot}6H_2O$, (pH 7.0)로 구성된 배지에 초기 pH를 7.0으로 조정하여 배양 종료까지 7.0을 유지하면서 공기주입량을 2.2vvm, 교반속도를 580rpm, glucose 농도를 0.586%로 하여 $30^{\circ}C$에서 42 시간 배양하였을때, 실제 효소생산량은 7.43 단위로 상기 분석법에서 예상한 효소 생산량의 97%에 달하였고, 플라스크배양의 효소생산량 (2.78 GIU/ml)보다 약 2.7배 가량 효소생산이 증가되었다.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1076-1084
• /
• 2017

석유제품 내의 식별제를 정성 정량분석하기 위해 HPLC의 적용가능성을 연구하였다. 등유와 자동차용 경유에 함유된 식별제의 정성분석을 위해 HPLC에서 최적의 분석조건(이동상 용매의 비율, 유속 등)을 선정하고, 이를 바탕으로 식별제의 정량분석을 위한 검량곡선을 작성하였다. 특히, 일정 농도 범위에서의 등유는 4.75분에서, 그리고 자동차용 경유는 4.17분의 머무름시간(retention time)을 나타내었고, 등유와 자동차용 경유의 검량곡선 상관계수($R^2$)가 0.999 이상을 나타내어 정량분석에 적용 가능할 것으로 나타났다. 현행 식별제의 분석방법인 UV/Vis 분광광도계를 이용한 분석결과와 비교분석을 실시하였고, 등유의경우 약 7 %의 낮은 편차를 보였으며, 자동차용 경유의 경우 약 20 %의 다소 큰 편차를 확인하였다.

• 한국건축시공학회지
• /
• 제18권6호
• /
• pp.507-515
• /
• 2018

본 연구의 목표는 숏크리트 타설시의 분진 발생 문제, 낮은 알칼리도의 유지를 통한 환경부하 감소 및 시멘트 광물계가 가지는 빠른 초기강도 발현의 특성을 동시에 가지는 슬러리형 급결제를 개발하고, 이를 활용하여 고성능 내염해성 숏크리트의 현장 타설에 적용하는 것이다. 본 연구에서는 물결합재비 0.44 및 0.338의 두 종류의 숏크리트 배합에 대하여 슬러리형 급결제를 현장 적용시켰으며, 현장에서 얻은 숏크리트 및 숏크리트용 베이스 콘크리트 시험체의 강도 및 내염해성을 비교 분석하였다. 실험 결과에 따르면, 슬러리형 급결제는 두 종류의 숏크리트 배합에 모두 성공적으로 적용 되었으며, 이를 이용하면 1일 강도 10MPa 28일 강도 40MPa급의 고성능 숏크리트의 제조가 가능한 것을 확인하였다. 물결합재 0.338의 숏크리트 배합에서, 고로슬래그 미분말의 활용시 1일강도는 물결합재비 0.44의 숏크리트 배합보다 다소 낮게 나타났으나, 28일 재령에서의 강도가 현저히 역전되었으며, 염해저항성이 크게 개선되는 것을 확인하여, 고로슬래그 미분말이 고성능 내염해성 숏크리트의 개발에 성공적으로 활용될 수 있음을 확인하였다.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.251-258
• /
• 2019

Objective: Chronic obstructive pulmonary disease(COPD) is characterized by persistent airflow limitations associated with chronic inflammatory response due to noxious particles or gases in the lung. Inflammation and oxidative stress are associated with COPD. The aim of this study was to evaluate the relationship among inflammation, oxidative stress, and airflow limitation severity in retired miners with COPD. Methods: The levels of serum high-sensitivity C-reactive protein(hsCRP) as a biomarker for inflammation, degree of reactive oxygen metabolites(dROMs) and biological antioxidants potential(BAP) in plasma as biomarkers for oxidative stress were measured in 211 male subjects with COPD. Degree of airflow limitation severity as determined by spirometry was divided into three grades grouped according to the classification of the Global Initiatives for Obstructive Lung Disease(GOLD)(1, mild; 2, moderate; $3{\leq}$, severe or more) using a fixed ratio, post- bronchodilator $FEV_1/FVC$ < 0.7. Results: Mean levels of dROMs significantly increased in relation to airflow limitation severity(GOLD 1, 317.8 U.CARR vs. GOLD 2, 320.3 U.CARR vs. GOLD $3{\leq}$, 350.9 U.CARR, p=0.047) and dROMs levels were correlated with serum hsCRP levels(r=0.514, p<0.001). Mean levels of hsCRP were higher in current smokers(non-smoker, 1.47 mg/L vs. smoker, 2.34 mg/L, p=0.006), and tended to increase with degree of airflow limitation severity(p=0.071). Mean levels of BAP were lower in current smokers(non-smoker, $1873{\mu}mol/L$ vs. smoker, $1754{\mu}mol/L$, p=0.006). Conclusions: These results suggest that inflammation and oxidative stress are related to airflow limitation severity in retired miners with COPD, and there was a correlation between inflammation and oxidative stress.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권6호
• /
• pp.904-911
• /
• 2019

Objective: The study was conducted to evaluate the effects of night light regimen on growth performance, antioxidant status and health of Lingnan Yellow broiler chickens from 1 to 21 days of age. Methods: A completely randomized factorial design involved 2 photoperiods (constant lighting [CL], 24 L:0 D and intermittent lighting [INL], 17 L:3 D:1 L:3 D)${\times}2$ light intensities (10 lx and 30 lx). A total of one thousand six hundred and eighty 1-d-old Lingnan Yellow broiler chicks were randomly divided into 4 treatments with 6 replicates (70 birds per replicate). The experiment lasted for 21 d. Results: Photoperiods and light intensities had no effect on average daily gain, feed conversion ratio, and mortality of the broiler chickens (p>0.05). The INL had a significant effect on average daily feed intake (p<0.05) of broiler chickens compared with CL. Photoperiod and light intensity had an interactive effect on melatonin (MT) concentration (p<0.05). At CL, reducing light intensity increased MT concentration; INL birds had higher MT but MT concentration was not affected by light intensity. There was an interactive effect on glutathione peroxidase (GPx) and catalase (CAT) in serum and total antioxidant capability (T-AOC) in liver between photoperiod and light intensity. With the decrease of light intensity, the activities of GPx and CAT in serum and T-AOC in liver increased in CL group (p<0.05). Broiler chickens reared under INL had better antioxidant status and 10 lx treatments had higher activities of CAT in serum than 30 lx (p<0.05). Different photoperiods and light intensities had no effect on malondialdehyde. There was an interaction between photoperiod and light intensity on serum creatine kinase (CK) concentration (p<0.05). At CL, the elevated light intensity resulted in an increase in CK content; INL birds had lower CK concentration especially in low light intensity group. Besides, INL and low light intensity significantly reduced the concentration of serum corticosterone and heat shock protein 70 (p<0.05). Serum immunoglobulin M contents were increased in broiler chickens reared under the INL compared with CL group (p<0.05). Conclusion: Results above suggest that the night light regimen of INL and 10 lx could be beneficial to the broiler chickens from 1 to 21 days of age due to the better health status and electricity savings.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.256-263
• /
• 2023

Objective: Feed molecular structures can affect its availability to gastrointestinal enzymes which impact its digestibility and absorption. The molecular spectroscopy-attenuated total reflectance Fourier transform infrared vibrational spectroscopy (ATR-FTIR) is an advanced technique that measures the absorbance of chemical functional groups on the infrared region so that we can identify and quantify molecules and functional groups in a feed. The program aimed to reveal the association of intrinsic molecular structure with nutrient supply to animals from canola feedstocks and co-products from bio-oil processing. The objective of this study was to characterize special intrinsic carbohydrate and protein-related molecular structure spectral profiles of feedstock and co-products (meal and pellets) from bio-oil processing from two source origins: Canada (CA) and China (CH). Methods: The samples of feedstock and co-products were obtained from five different companies in each country arranged by the Canola Council of Canada (CCC). The molecular structure spectral features were analyzed using advanced vibrational molecular spectroscopy-ATR-FTIR. The spectral features that accessed included: i) protein-related spectral features (Amide I, Amide II, α-helix, β-sheet, and their spectral intensity ratios), ii) carbohydrate-related spectral features (TC1, TC2, TC3, TC4, CEC, STC1, STC2, STC3, STC4, TC, and their spectral intensity ratios). Results: The results showed that significant differences were observed on all vibrationally spectral features related to total carbohydrates, structural carbohydrates, and cellulosic compounds (p<0.05), except spectral features of TC2 and STC1 (p>0.05) of co-products, where CH meals presented higher peaks of these structures than CA. Similarly, it was for the carbohydrate-related molecular structure of canola seeds where the difference between CA and CH occurred except for STC3 height, CEC and STC areas (p>0.05). The protein-related molecular structures were similar for the canola seeds from both countries. However, CH meals presented higher peaks of amide I, α-helix, and β-sheet heights, α-helix:β-sheet ratio, total amide and amide I areas (p<0.05). Conclusion: The principal component analysis was able to explain over 90% of the variabilities in the carbohydrate and protein structures although it was not able to separate the samples from the two countries, indicating feedstock and coproducts interrelationship between CH and CA.

• Animal Bioscience
• /
• 제35권12호
• /
• pp.1911-1920
• /
• 2022

Objective: This study was performed to determine the apparent metabolizable energy (AME_n) content of tannin-free red/bronze, white/tan and U.S. No. 2 varieties of grain sorghum for feeding Japanese quail and validate their nutrient profile by evaluating effects on performance and carcass traits with full-substitution of corn. Methods: Experiment 1 determined the AME_n content of red/bronze, white/tan, and U.S. No. 2 grain sorghum varieties fed to mixed-sex Japanese quail (Coturnix japonica) (n = 314) at 3 and 6-weeks of age. Analyses were based on a 2×4 factorial treatment design with age and grain types defining the treatments, and a randomized complete block experiment design with cage and trials defining the block. AME_n values were validated by evaluating the performance and carcass traits of Japanese quail (n = 644) from 1 to 40 days of age in Experiment 2 with birds were fed 1 of 4 complete diets. Statistical analyses were conducted on performance data and select individual carcass trait measurements. Results: Determined AME_n values at 3-weeks of age were 3,524±122.03 (red/bronze), 3,252±122.03 (white/tan), and 3,039±123.44 (U.S. No. 2) kcal/kg. At 6-weeks of age, determined AME_n were 3,373±297.35 (red/bronze), 3,279±297.35 (white/tan), and 2,966±298.64 (U.S. No. 2) kcal/kg. Carcass traits showed live body weight (p = 0.0409) and hot carcass weight (p = 0.0234) were greatest in U.S. No. 2; however, carcass yield (p<0.0001) was lowest. No significant differences were observed among treatments for feed intake, feed conversion ratio, breast weight and breast yield (p>0.05). Conclusion: These studies demonstrated that tannin-free grain sorghum varieties may be a potential alternative to corn in quail diets while maintaining growth performance and carcass parameters.