• 동아시아식생활학회지
• /
• 제27권3호
• /
• pp.348-363
• /
• 2017

We analyzed the mixed culture characteristics of isolated brewing fungi obtained from Korean traditional nuruk for their development as fermentation starters. In a previous study, we selected appropriate fungi strains based on their large fungi bodies and strong enzyme activities. These fungi strains were mixed cultured under various combination of ratios, pHs and temperatures. As a result, total acidities of R. delemar mixed culture media were higher than those of A. oryzae cultured at $20^{\circ}C$ and $37^{\circ}C$. The pHs of A. luchuensis 34-1 and A. oryzae 37-7 as well as R. delemar 58-8 and A. oryzae 37-7 mixed culture media gradually increased with the culture period. On the contrary, total acidities of the mixed culture media gradually decreased. ${\alpha}-Amylase$ activities of R. delemar 26-4 and R. oryzae 82-7 mixed culture media were strong at $20^{\circ}C$ and pH 4, glucoamylase activities of R. delemar 58-8 and A. oryzae 37-7 were strong at $37^{\circ}C$, pH 3 and 1:2 ratio, and acidic protease activities of R. delemar 26-4 and A. oryzae 78-5 were strong at $20^{\circ}C$, pH 4 and 1:4 ratio. This study provides the optimal mixed culture conditions for fermentation starters based on changes in pH and total acidity, favorable enzyme activities, and fungi varieties.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.1-10
• /
• 2005

Screw compressor chillers are widely used in refrigeration for capacity over 30 RT. In general, chillers operate under part-load conditions during most of the time. Therefore, information on the characteristics of part-load is very important for better chiller performance and energy economy. In this study, performance tests of screw chiller with economizer using R22 and R407C under part-load conditions have been performed for various secondary fluid temperatures. Adoption of an economizer system increased the cooling capacity and improved COP except for lower part-load condition when economizer volume ratio is 1.01. For the same cooling capacity condition at part-load, COP's of both non-economizer and economizer system showed similar values.

• 지구물리와물리탐사
• /
• 제12권3호
• /
• pp.246-254
• /
• 2009

균질매질과 자유면 경계에서 선형입자운동을 하는 파를 타원형 입자운동을 하는 파로부터 분리하기 위한 새로운 분극필터를 다성분 복소트레이스 분석법에 근거하여 개발하였다. 균질매질에서의 입자운동을 모사한 합성파를 통해 이 필터의 성능을 검증한 결과, P파와 레일리파의 수평성분/수직성분 진폭비 $C_L$과 $C_R$를 알고 있을 경우, 이 분극필터는 레일리파 성분을 완벽하게 제거하여 이상적인 결과를 보인다. 이 분극필터 결과의 수직성분 오차는 $C_R$/$C_L$에 따라 증가하고, 수평성분 오차는 $C_R$ $C_L$에 따라 증가한다. 특히 수직성분 오차는 $C_L$과 $C_R$의 적용값/모델값 비율($C_L'$/$C_L$와 $C_R'$/$C_R$)이 작을 때 급격히 증가하며, 입사각이 작을 때는 $C_R'$/$C_R$에, 클 때는 $C_L'$/$C_L$에 각각 민감하다. S파와 레일리파가 중첩되어 있는 경우는, 입사각이 P파 입사각의 보각인 경우와 동일하다.

• Journal of Nutrition and Health
• /
• 제29권9호
• /
• pp.1035-1041
• /
• 1996

The study was undertaken to examine the levels of serum lipids and the correlations between serum lipid levels and other factors(nutrient intakes, anthrometric measurement, blood pressure, drinking, smoking). The participants in this study were healthy volunteers over the age of 40 residing in Whachon area, Kang-Wan Do. The level of serum TG was higher in males than in females, particularly in age of 40(209.8mg/dl$\pm$154.9, p<0.05). The HDL-c/total cholesterol ratio(HTR) in males was the lowest(0.23$\pm$0.07, p<0.05) in age of 40 and in females was the lowest(0.25$\pm$0.1) in age of 60 and over. LDL-c/HDL-c ratio(LHR) was the highest (males 3.64$\pm$6.29, females 3.28$\pm$3.03) in age of 40 in both sexes. In the age of 40-59, serum TG, total cholesterol and LDL-cholesterol and HDL-cholesterol tended to increase with BMI. Serum TG showed positive correlation with drinking (r=0.026, p<0.001) and BMI (r=0.2096, p<0.01). BMI was negatively correlated with HTR(r=-0.2242, p<0.01) and HDL-cholesterol (r=-0.2054, p<0.01).

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.305-318
• /
• 2009

A marine ranching project in Tongyoung was established in 1998, lasting 9 years to 2006. Project activities included the deployment of artificial reefs, the release of young fishes like jacopever and rockfish, and input/output control for specific marine ranching areas in Tongyoung. This report focuses on the economic feasibility of the project in hindsight. Analysis concentrates on three aspects; (a) direct economic benefits, such as increasing effects of fisheries income and savings in harvesting costs, (b) indirect benefits, including increasing effects of recreational fishing and saving R&D costs, and (c) costs, including releasing and purchasing costs of artificial reef and juvenile fish, R&D costs, maintenance costs and harvesting costs. Results show that NPV=4.7 billion won, IRR=8.55% and B/C ratio=1.286 under Scenario 1, which considers the saving effects of R&D costs, and NPV=0.9 billion won, IRR=6.03% and B/C ratio=1.11 under Scenario 2, which does not consider the saving effects of R&D costs, based on 5.5% of the social rate of discount. According to sensitivity analysis, the economic feasibility is very sensitive to the recapture rate.

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.145-154
• /
• 1996

폴리머 시멘트 모르터는 보수성 및 방수성이 우수한 재료로서 모르터 내부의 수분의 확산거동 대한 연구는 중요하다. 본 연구에서는건조조건을 달리한 폴리머 시멘트 모르터의 수분확산에 영향을 미치는 상대습도와 내부함수율의 변화에 따른 수분의 확산계수와 건조수축과의 관계에 대해 고찰하였으며, 수분확산에 영향을 미치는 내부의 세공조직의 분포를 측정하였다. 본 실험결과, 폴리머 시멘트 모르터의 수분확산에 영향을 미치는 요인과 결과는 상호 상관관계를 나타내며, 건조수축과 수분확산계수는 보통 시멘트 모르터에 비해 아주 적었으며 상대습도, 폴리머 시멘트비 및 세공의 분포에 영향을 받는다.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.104-111
• /
• 2011

An ultrafine grained Mg-9Al-1Zn magnesium alloy with the mean grain size less than $1{\mu}m$ was produced by using high-ratio differential speed rolling. The processed alloy exhibited excellent superplasticity at relatively low temperatures. The micro-forming tests were carried out using a micro-forging apparatus with micro V-grooved shaped dies made of silicon and the micro-formability was evaluated by means of micro-formability index, $R_f$ ($=A_f/A_g$, $A_f$: formed and inflowed area into the V-groove, $A_g$: area of the V-groove). The $R_f$ value increased with temperature up to $280^{\circ}C$ and then decreased beyond $300^{\circ}C$. The decrease of the $R_f$ value at $300^{\circ}C$ was attributed to the accelerated grain coarsening. Increasing the micro-forging pressure increased the $R_f$ values. At a given die geometry, die filling ability decreased as the die position moved away from the die center to the end. FEM simulation predicted this behavior and a method of improving this problem was proposed.

• 소성∙가공
• /
• 제28권5호
• /
• pp.287-293
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep drawability of the Al sheet. This study investigated the increase in the plastic strain ratio and the texture change of AA1050 Al sheet after the hot asymmetric rolling. The average plastic strain ratio of initial AA1050 Al sheets was 0.41. After 84% hot asymmetric rolling at $400^{\circ}C$, the average plastic strain ratio was 0.77. The average plastic strain ratio of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1.9 times higher than that of initial AA1050 Al sheet. The ${\mid}{\Delta}R{\mid}$ of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1/2 times lower than that of initial AA1050 Al sheet. This result is due to the development of the intensity of the ${\gamma}-fiber$ texture and the decrease of the intensity of {001}<100> texture after the hot asymmetric rolling of AA1050 Al sheet.

• 소성∙가공
• /
• 제28권5호
• /
• pp.281-286
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep draw ability of the Al sheet. This study investigated the increase of the plastic strain ratio and the texture change of AA3003 sheet after the hot asymmetric rolling. The average plastic strain ratio of the initial AA3003 sheets was 0.69. After 83% hot asymmetric rolling at $200^{\circ}C$, the average plastic strain ratio was 0.83. The average plastic strain ratio of the 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 1.2 times higher than that of the initial AA3003 sheet. The ${\mid}{\Delta}R{\mid}$ of 83% hot asymmetrically rolled AA3003 sheet at $200^{\circ}C$ is 0.83 times lower than that of the initial AA3003 sheet. This result is due to the development of the intensity of ${\gamma}-fiber$ texture and reduces the intensity of {001}<110> and {001}<100> textures after hot asymmetric rolling of AA3003 sheet.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.903-906
• /
• 2001

The objective of this experimental study was to understand the effect of horizontal shear bar on the shear behavior of R.C. deep beams. Therefore, in the test program, the horizontal shear bar ratio($\rho_{sh}$) and shear span-to-overall depth ratio(a/h) are considered as two main variables. Test results indicate that for deep beams with a/h equal to 1.0, horizontal shear bar is less efficient in restricting the diagonal crack width development and enhancing the ultimate shear strength. So, it can be concluded that shear resistance of horizontal shear bar is related to a/h rather than clear span-to-effective depth ratio($l_{n}$/d) recommended in ACI code.