• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1395-1403
• /
• 2008

The objective of the present study was to estimate genetic parameters for economic traits in Markhoz goats. Data collected from 1993 to 2006 by the Markhoz goat Performance Testing Station in Sanandaj, Iran, were analyzed. The traits recorded as body weight performance at birth (BW), weaning (WW), six month (6MW), nine month (9MW), yearling (YW) and yearling fleece weight (YFW) were investigated. Least square analyses were used for estimation of environmental effects. Genetic parameters were estimated with single and multi trait analysis using restricted maximum likelihood (REML) procedures, under animal models. By ignoring or including maternal additive genetic effects and maternal permanent environmental effects, five different models were fitted for each trait. The effects of sex, type of birth, age of dam and year of birth on the all body weights were significant (p<0.01), but had no effects on YFW except year of birth. Age of kids had significant influences on WW and 6MW (p<0.01). A log likelihood ratio test was carried out for choosing the most suitable model for each trait. Total heritability estimates for YFW and growth traits varied from 0.16 for YFW and WW to 0.41 for YW. For all traits, maternal heritability was lower than direct heritability, ranging from 0.06 for BW to 0.01 for 6MW and 9MW. The magnitude of $c^2$ was more substantial for BW than the others, and relative importance was reduced from 0.12 for BW to 0.04 for 9MW. The direct additive genetic correlations estimates were positive and varied from 0.21 between BW-YW to 0.96 between WW-6MW. Direct additive genetic correlations between YFW and body weight traits were positive and ranged from 0.14 between BW-YFW to 0.67 between 6MW-YFW. For all traits, the corresponding estimates for phenotypic correlation were positive and lower than genetic correlations. The maternal additive genetic correlations between various traits were varied and ranged from -0.19 between 9MW-YFW to 0.96 between 6MW-9MW. The estimates of the maternal permanent environmental correlations between various traits were positive and ranged from 0.33 between WW-YFW to 0.93 between WW-6MW. Also, the environmental correlations between various traits ranged from 0.01 between BW-YFW and WW-YFW to 0.70 between 9MW-YW. Estimates of genetic parameters for various traits in this study confirm that selection should be applied on WW for genetic improvement in Markhoz goats.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권7호
• /
• pp.1006-1013
• /
• 2015

Heat-stress remains a costly issue for animal production, especially for poultry as they lack sweat glands, and alleviating heat-stress is necessary for ensuring animal production in hot environment. A high ${\gamma}$-aminobutyric acid (GABA)-producer Lactobacillus strain was used to investigate the effect of dietary GABA-producer on laying performance and egg quality in heat-stressed Hy-line brown hens. Hy-Line brown hens (n = 1,164) at 280 days of age were randomly divided into 4 groups based on the amount of freeze-dried GABA-producer added to the basal diet as follows: i) 0 mg/kg, ii) 25 mg/kg, iii) 50 mg/kg, and iv) 100 mg/kg. All hens were subjected to heat-stress treatment through maintaining the temperature and the relative humidity at $28.83{\pm}3.85^{\circ}C$ and 37% to 53.9%, respectively. During the experiment, laying rate, egg weight and feed intake of hens were recorded daily. At the 30th and 60th day after the start of the experiment, biochemical parameters, enzyme activity and immune activity in serum were measured. Egg production, average egg weight, average daily feed intake, feed conversion ratio and percentage of speckled egg, soft shell egg and misshaped egg were significantly improved (p<0.05) by the increasing supplementation of the dietary GABA-producer. Shape index, eggshell thickness, strength and weight were increased linearly with increasing GABA-producer supplementation. The level of calcium, phosphorus, glucose, total protein and albumin in serum of the hens fed GABA-producing strain supplemented diet was significantly higher (p<0.05) than that of the hens fed the basal diet, whereas cholesterol level was decreased. Compared with the basal diet, GABA-producer strain supplementation increased serum level of glutathione peroxidase (p = 0.009) and superoxide dismutase. In conclusion, GABA-producer played an important role in alleviating heat-stress, the isolated GABA-producer strain might be a potential natural and safe probiotic to use to improve laying performance and egg quality in heat-stressed hens.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권8호
• /
• pp.1073-1079
• /
• 2010

Forty-eight ((Duroc${\times}$Yorkshire)${\times}$Landrace) pigs with an average initial body weight (BW) of $48.47{\pm}1.13\;kg$ were used in a 12-week growth trial to investigate the influence of Anion (silicate) supplementation on growth performance, nutrient digestibility, meat quality and fecal noxious gas content in growing-finishing pigs. Pigs were allotted into three dietary treatments in a randomized complete block design according to sex and initial BW. Each dietary treatment consisted of four replications with four pigs per pen. Dietary treatments included: i) CON (basal diet), ii) HCI (basal diet+3 g/kg Anion), iii) HCII (basal diet+6 g/kg Anion). No significant difference (p>0.05) was detected for average daily gain (ADG), average daily feed intake (ADFI) and gain/feed ratio (G/F) throughout the experiment, although dietary supplementation of Anion numerically increased these characteristics compared with CON. The dietary HCI group significantly (p<0.05) increased the coefficient of total tract apparent digestibility (CTTAD) of dry matter (DM), nitrogen (N) and energy compared with the CON group (p<0.05). No significant difference was observed in meat quality except that meat firmness was linearly (p<0.05) increased by the Anion supplementation, while an increased tendency in meat color and a decreased tendency in 2-thiobarbituric acid reactive substances (TBARS) was also observed (p<0.10). Anion supplementation linearly (p<0.05) decreased the fecal $NH_3$ compared with the CON group. However, dietary Anion supplementation at 3 g/kg decreased the $H_2S$ concentration compared with CON, while no significant difference was detected in the HCII group, although the $H_2S$ emission was numerically decreased compared with CON. In conclusion, supplementation of the diet with 3 g/kg Anion was found to exert a beneficial effect on nutrient digestibility and meat quality of growing-finishing pigs, and concomitantly decreased the noxious gas emission without negative effect on growth performance.

• The Korean Journal of Physiology and Pharmacology
• /
• 제18권1호
• /
• pp.25-32
• /
• 2014

Nitric oxide (NO) is recognized as a mediator and regulator of inflammatory responses. NO is produced by nitric oxide synthase (NOS), and NOS is abundantly expressed in the human dental pulp cells (HDPCs). NO produced by NOS can be cytotoxic at higher concentrations to HDPCs. However, the mechanism by which this cytotoxic pathway is activated in cells exposed to NO is not known. The purpose of this study was to elucidate the NO-induced cytotoxic mechanism in HDPCs. Sodium nitroprusside (SNP), a NO donor, reduced the viability of HDPCs in a dose- and time-dependent manner. We investigated the in vitro effects of nitric oxide on apoptosis of cultured HDPCs. Cells showed typical apoptotic morphology after exposure to SNP. Besides, the number of Annexin V positive cells was increased among the SNP-treated HDPCs. SNP enhanced the production of reactive oxygen species (ROS), and N-acetylcysteine (NAC) ameliorated the decrement of cell viability induced by SNP. However, a soluble guanylate cyclase inhibitor (ODQ) did not inhibited the decrement of cell viability induced by SNP. SNP increased cytochrome c release from the mitochondria to the cytosol and the ratio of Bax/Bcl-2 expression levels. Moreover, SNP-treated HDPCs elevated activities of caspase-3 and caspase-9. While pretreatment with inhibitors of caspase (z-VAD-fmk, z-DEVD-fmk) reversed the NO-induced apoptosis of HDPCs. From these results, it can be suggested that NO induces apoptosis of HDPCs through the mitochondria-dependent pathway mediated by ROS and Bcl-2 family, but not by the cyclic GMP pathway.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.299-304
• /
• 2016

Nitrate-citrate 혼합 전구체로부터 ZnO 입자 합성을 위한 자체진행 반응(Self-propagating reaction)의 특성을 고찰하였다. 질화물과 Citrate 그룹간의 자체진행 반응을 위해 탄소/질소 성분의 비는 0.7~0.8 수준으로 유지하였으며, 출발물질의 시료를 TGA방법에 의해 열분해하였다. 반응의 후반부인 반응 전환율이 0.5 이상에서 자체진행 반응의 특성을 나타내었으며 시료는 매우 짧은 시간에 많은 열을 방출하며 분해되었다. 반응의 전반부(X<0.5)가 전체반응의 율속단계로 나타났으며, 이 율속단계에서 반응의 특성을 Friedman, Ozawa-Flynn-Wall 그리고 Vyazovkin의 방법들을 사용하여 해석하였다. 율속단계에서 활성화 에너지는 46~130 (kJ/mol)의 범위로 반응 전환율이 증가함에 따라 증가하였으며, 반응차수는 2.9~0.9, 그리고 반응속도의 빈도인자(Frequency factor)는 85~278 ($min^{-1}$)의 범위에서 승온속도가 증가함에 따라 각각 전자는 감소하고 후자는 증가하였다.

• 한국환경과학회지
• /
• 제17권7호
• /
• pp.755-765
• /
• 2008

To investigate correlation between the distribution of marine bacteria and environmental characteristics in the surface sediments of Kamak Bay, chemical oxygen demand(COD), acid volatile sulfide(AVS), ignition loss(IL), total organic carbon(TOC), and total organic nitrogen(TON) were measured and analyzed at 7 stations in winter and summer. In winter, COD and AVS ranged from 13.45 mg/g to 30.06 mg/g(average: 23.58 mg/g) and from 0.03 mg/g to 1.04 mg/g(average: 0.63 mg/g), respectively. IL, TOC, and TON ranged from 8.03% to 11.41%(average: 9.41%), from 1.17% to 2.10%(average: 1.62%), and from 0.09% to 0.18%(average 0.15%), respectively. In summer, COD, AVS, IL, TOC, and TON ranged from 14.06 mg/g to 32.19 mg/g(average: 24.71 mg/g), from 0.03 mg/g to 1.11 mg/g(average: 0.66 mg/g), from 9.00% to 12.15%(average: 10.96%), from 1.27% to 2.12%(average 1.77%), and from 0.12% to 0.19%(average: 0.16%), respectively. These values were relatively higher than those in winter. Kamak Bay had high C/N ratio that might be resulted from the input of terrestrial sewage and industrial wastewater. The number of marine viable bacteria was $8.9{\times}10^4\;cfu/g$ in winter and $9.7{\times}10^5\;cfu/g$ in summer. The most abundant species were Pseudomonas spp., Flavobacterium spp., and Vibrio spp, in the surface sediments of Kamak Bay. It was found that the concentration of organic matters and viable bacterial cells in the inner part were relatively higher than those in the outer of Kamak Bay. The distribution of viable bacterial cells was closely influenced by environmental factors.

• KSBB Journal
• /
• 제18권4호
• /
• pp.249-254
• /
• 2003

Candida magnoliae M26에 의한 erythritol의 산업적 생산을 위한 산업용 질소원의 선정과 이를 이용한 유가식 배양에서의 erythritol 생산을 위한 최적 조건의 결정에 대한 실험을 수행하였다. 실험결과에서 산업용 질소원으로 가격이 가장 저렴하면서 erythritol의 수율과 생산성이 거의 yeast extract와 유사한 light steep water (LSW)를 선정하였다. 즉 선정한 LSW 43.3 mL/L과 glucose 250 g/L을 이용한 회분식 발효에서 52.6％의 수율과 0.52 g/L-hr의 생산성으로 131.6 g/L의 erythritol을 생산하였다. 생산성 향상을 위한 2단계 유가식 배양에서 고농도 균체를 얻기 위한 최적이 C/N ratio는 1.7으로서 glucose 100 g/L와 LSW 500 mL/L를 이용한 회분식 배양에서 71.0 g/L의 세포농도를 얻을 수 있었다. 배지의 초기 pH 조절방법에 대한 연구에서는 28％ 암모니아 용액으로 pH 6.5로 조절할 경우 erythritol의 수율은 감소하였으나 높은 생산성으로 erythritol을 얻을 수 있었다. 따라서 erythritol의 수율 향상을 위한 생산단계에서의 최적 glucose 농도는 450 g/L이 되도록 하는 경우이며, 이때에 37.3％의 수율과 1.66 g/L-hr의 생산성으로 185.5 g/L의 erythritol을 생산할 수 있었다. 따라서 산업용 질소원으로 선정된 LSW를 이용한 2단계 유가식 발효 공정을 통하여 회분식 배양과 비교해 볼 때 수율은 1.4배 정도 감소되었지만 erythritol의 생산성은 3.2배로 향상시킬 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.122-129
• /
• 2005

The characteristics of hydrogen storage have been investigated in the Ti-Cr-Mo and Ti-Cr-V ternary alloys with bcc structure. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The lattice parameters, microstructures and phases of the alloys were examined by SEM, EDX and XRD, and the Pressure-Composition isotherms of the alloys were measured. From these data the relationship of the maximum and effective hydrogen storage capacities vs. chemical composition, lattice parameter and the radius of tetrahedral site were analyzed and discussed. The results showed that all of these alloy, in the range of the this study, had mainly bcc solid solutions with small amount of Ti segregation due to a lower melting point of Ti compared with other elements. Lattice parameters of the alloys were very near to the atomic average values of lattice parameters of the constituent elements. It was also found that maximum hydrogen storage capacities of the Ti-Cr-Mo alloys increased with increasing Ti content and the radius of tetrahedral site but the effective hydrogen storage capacities decreased after showing the maximum. The hydrogen storage capacities of the Ti-Cr-V alloys were almost same even though the V contens were quite different from alloy to alloy and this could be attributed to the almost same Ti/Cr ratio of the alloys. The maximum effective hydrogen storage capacity of the Ti-Cr-Mo alloys was revealed at Ti content of about 40${\sim}$50 at% and radius of tetrahedral site of 0.43${\sim}$0.45 nm. The Ti-Cr-V alloys showed the hydrogen storage capacities of 3.0 wt% and effective hydrogen storage capacities of 1.5 wt%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.363-363
• /
• 2008

The development of dry etching process for sapphire wafer with plasma has been key issues for the opto-electric devices. The challenges are increasing control and obtaining low plasma induced-damage because an unwanted scattering of radiation is caused by the spatial disorder of pattern and variation of surface roughness. The plasma-induced damages during plasma etching process can be classified as impurity contamination of residual etch products or bonding disruption in lattice due to charged particle bombardment. Therefor, fine pattern technology with low damaged etching process and high etch rate are urgently needed. Until now, there are a lot of reports on the etching of sapphire wafer with using $Cl_2$/Ar, $BCl_3$/Ar, HBr/Ar and so on [1]. However, the etch behavior of sapphire wafer have investigated with variation of only one parameter while other parameters are fixed. In this study, we investigated the effect of pressure and other parameters on the etch rate and the selectivity. We selected $BCl_3$ as an etch ant because $BCl_3$ plasmas are widely used in etching process of oxide materials. In plasma, the $BCl_3$ molecule can be dissociated into B radical, $B^+$ ion, Cl radical and $Cl^+$ ion. However, the $BCl_3$ molecule can be dissociated into B radical or $B^+$ ion easier than Cl radical or $Cl^+$ ion. First, we evaluated the etch behaviors of sapphire wafer in $BCl_3$/additive gases (Ar, $N_2,Cl_2$) gases. The behavior of etch rate of sapphire substrate was monitored as a function of additive gas ratio to $BCl_3$ based plasma, total flow rate, r.f. power, d.c. bias under different pressures of 5 mTorr, 10 mTorr, 20 mTorr and 30 mTorr. The etch rates of sapphire wafer, $SiO_2$ and PR were measured with using alpha step surface profiler. In order to understand the changes of radicals, volume density of Cl, B radical and BCl molecule were investigated with optical emission spectroscopy (OES). The chemical states of $Al_2O_3$ thin films were studied with energy dispersive X-ray (EDX) and depth profile anlysis of auger electron spectroscopy (AES). The enhancement of sapphire substrate can be explained by the reactive ion etching mechanism with the competition of the formation of volatile $AlCl_3$, $Al_2Cl_6$ or $BOCl_3$ and the sputter effect by energetic ions.

• 한국환경과학회지
• /
• 제27권5호
• /
• pp.333-340
• /
• 2018

This study aimed to estimate the effect of inoculant application level on chemical composition and bacterial count of fermented chestnut meal (FCM), and its rumen fermentation characteristics. The inoculant contained Lactobacillus acidophilus ($1.2{\times}10^{10}cfu/g$), Bacillus subtilis ($2.1{\times}10^{10}cfu/g$), and Saccharomyces cerevisiae ($2.3{\times}10^{10}cfu/g$). The chestnut meal mixed with molasses, double distilled water, and inoculant at 1 kg, 3 g, 480 mL, and 20 mL ratio for the basal chestnut meal diet. The double distilled water from basal chestnut meal diet was substituted with bacterial inoculant at a level of 0 (Control), 20 (Medium), and 40 mL (High) in the experimental diets. The mixed experimental diets were incubated at $39^{\circ}C$ for 7, 14, and 21 days, respectively. On 7 days of FCM incubation, the contents of crude protein (CP) (quadratic, P=0.043) and neutral detergent fiber (quadratic, P=0.071) decreased by increases of inoculant application levels, whereas bacterial count (quadratic, P=0.065) and rumen $NH_3-N$ (linear, P=0.063) increased. By increases of inoculant application levels on 14 days of FCM incubation, the increases were found on dry matter (DM) (quadratic, P=0.085), CP (quadratic, P=0.059), acid detergent fiber (quadratic, P=0.056), in vitro DM digestibility (linear, P=0.002), rumen total volatile fatty acid (VFA) (linear, P=0.057), and rumen iso-butyrate (linear, P=0.054). However, the decreases were found on bacterial count (linear, P=0.002), propionate (linear, P=0.099), and butyrate (quadratic, P=0.082). On 21 days of FCM incubation, in vitro DM digestibility (linear, P=0.002) and total VFA (linear, P=0.001) increased by increases of inoculant application levels, whereas the contents of CP (quadratic, P=0.034) and neutral detergent fiber (quadratic, P=0.047) decreased. These results indicate that the FCM with a medium level of inoculant application and 14 of fermentation had beneficial effects by increasing DM digestibility and rumen total VFA content, without altering bacterial count.