• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1564-1568
• /
• 2005

The objective of the study was to evaluate the use of n-alkanes to estimate DM intake and digestibility by beef cattle. Six steers were blocked (3 blocks, 2 animals/block) according to the body weight (279${\pm}$19 kg) and randomly allotted within blocks to two diets (3 steers/diet). A second trial was conducted with the same animals (321${\pm}$18 kg) after 36 days (d), using a switch back design. The diets consisted of two types of chopped sun-cured hay, alfalfa (Medicago sativa L) hay, or fescue (Festuca arundinacea Schreb) and alfalfa mixture, which were fed in equal amounts to steers. Animals were dosed with $C_{32}$ and $C_{36}$ alkanes, employing an intra-ruminal controlled-release device at the beginning of each trial. Hay intake per animal was measured from d 6 to 12 and sub samples were taken for chemical analysis. Rectal samples of feces were taken from each animal once/daily from d 8 to 14, freeze dried, and ground prior to alkane analysis. Alkanes were extracted from ground hay and feces. Feed intake was calculated from the dose rate of $C_{32}$ alkane and, the herbage and fecal concentrations of adjacent odd ($C_{33}$ or $C_{31}$) and even ($C_{32}$) chain length alkanes. Crude Protein, NDF, ADF, ash concentrations and In vitro dry matter digestibility (IVDMD) were 17.7, 42.2, 28.4, 7.9 and 71.7 for alfalfa, and 12.4, 56.5, 30.4, 6.9 and 69.1% for fescue/alfalfa mixture, respectively. For both diets, intake estimated from $C_{33}$:$C_{32}$ ratio was not different from the measured intake, but intake estimated from $C_{31}$:$C_{32}$ ratio was lower (p<0.05), than the measured intake for both diets. The average estimated forage intake from $C_{33}$:$C_{32}$ ratio was 4.86 and 0.69% below than the measured intake for alfalfa and, fescue/alfalfa mixed diets, respectively. The respective estimates with $C_{31}$:$C_{32}$ ratio were 9.59 and 11.33% below than the measured intake. According to these results, alkane $C_{33}$:$C_{32}$ ratio is better than alkane $C_{31}$:$C_{32}$ ratio for the estimation of intake by beef steers.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.21-26
• /
• 2003

Ninety strains of photosynthetic bacteria were isolated from a local stream at Kyonggi-do, Korea and were further screened. Using these isolated strains, experiments were performed under various light and oxygen conditions in order to select strains with high nitrogen $(NH_3-N,\; NO_3^--N)$ removal efficiencies. Results showed that all the strains screened removed $NH_3-N$, the light had no effect on nitrogen removal, and the nitrogen removal rate was higher aerobically than anaerobically. The removal of $NO_3^--N$ was showed up to 35.3% in some specific strains. Results of batch experiments using Rhodocyclus gelatinosus, an isolated strain with a superior removal rate of $NH_3--N$ and $NH_3-N$, under the anaerobic condition, showed that the removal rate of organics and $NH_3-N$ was the highest (98.2 and 89.0%, respectively) at the CODcr (mg/L)/biomass (mg/L) ratio of 0.2, and the $NH_3-N$ concentration did not increase with the decreasing $NH_3-N$ concentration. Experimental results from various C/N ratios confirmed that the effective removal rate (75.8%) of $NH_3-N$ occurred even at the low (5:1) C/N ratio as well as high ratios, and the simulataneous removal of $NO_3^--N$ (96.0%).

• Food Science of Animal Resources
• /
• v.34 no.4
• /
• pp.423-433
• /
• 2014

In this study, the nutritional and storage quality of meatballs formulated with different levels (0, 1.5, 3.0, 4.5 and 6.0%) of bee pollen were investigated during storage at $41^{\circ}C$ for 9 d. Protein content of meatballs increased, while moisture content decreased with increased pollen. The addition of pollen improved cooking loss but decreased the redness (Hunter a value) and sensory scores. Textural parameters (hardness, springsness, gumminess, and chewiness) were affected by pollen addition and the hardness and gumminess values of meatballs decreased as the pollen content increased. While C18:0 content of meatballs slightly decreased with pollen addition, C18:2n-6c, C18:3n-3, C20:5n-3, and PUFA contents increased. The PUFA/saturated fatty acids (P/S) ratio increased from 0.05 in the control to 0.09 in meatballs with 6.0% pollen. The n-6/n-3 ratio decreased from 11.84 in the control to 3.65 in the meatballs with 6.0% pollen. The addition of pollen retarded the lipid oxidation and inhibited the bacterial growth in meatballs. The pH, redness, TBA value and total aerobic mesophilic bacteria, coliform bacteria and S. aureus counts values changed significantly during storage. The results suggest that bee pollen could be added to enhance the nutritional and storage quality of meatballs with minimal changes in composition and/or sensory properties.

• Korean Journal of Community Nutrition
• /
• v.9 no.1
• /
• pp.58-65
• /
• 2004

The purpose of this research was to examine the relationship between the plasma LDL particle size and blood lipid profile, dietary factors and anthropometric values (body mass index, waist circumference and waist/hip ratio). The subjects were 173 adults aged 23 to 81 years, selected from the Outpatient Clinic and Cardiovascular Department of the Seoul Municipal Hospital. Dietary data were obtained using a 3-day food record and analyzed using Korean and US nutrient databases. The subjects were divided into three groups by LDL particle size : type A (large buoyant LDL, > 25.5 nm, n=96), type I (Intermediate LDL,$25.2\leq-\leq25.5$ nm, n=18), and type B (small dense LDL, < 25.2 nm, n=59) groups. The type B group had higher age, waist circumference, and waist/hip ratio (WHR) than the type A and type I groups. Serum concentration of triglyceride, Apo B, LDL/HDL cholesterol ratio and atherogenic index were significantly higher in the type B group as compared to those in the other two groups. HDL cholesterol level and Apo A-I/Apo B ratio were significantly lower in the type B group than the other two groups. The plasma LDL particle size was highly correlated with triglyceride (r= -0.450), Apo B (r= -0.402) and HDL cholesterol (r= 0.418). However, there was no correlation between plasma LDL particle size and dietary intakes. This study showed that small dense LDL was an important biochemical risk factor that was associated with other risk factors.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.43-58
• /
• 1975

There are many reports on fatigue crack of metallic materials but most of them relate crack propagation rate to stress intensity factor. The problem of crack propagation is not yet clarified, especially the bridge between micro and macro phenomena In this experiment rotating bending fatigue tests have been carried out with smoothed specimen of rolled steel plates including 0.2% carbon under application of three stress conditions to investigate the slip band and the crack propagation behaviour. The results obtained are as follows; 1) The length of cracks which have grown at initial crack tips can be expressed as follows; $l=Ae^{BNr}$(A,B: constant, $N_r$: cycle ratio) $\frac{dl}{dN}=\frac{AB}{N_f}{\cdot}e^{BNr}$($N_f$:fatigue life) 2) The ratio of slipped grain number to total grain number is $S_f=7{\sigma}-5.6$-5.6{\sigma}_c$($\sigma$: stress amplitude) (${\sigma}_c$: fatigue limit) 3) When the fatigue process transfers from Stage I to Stage II, the crack which propagates into specimen changes its direction from that of the maximum shear stress to the direction of perpendicular to principal stress and this is same in the circumferential direction of specimen. the crack propagation behaviors of both sides of a crack are different each other when they approach to the grain boundary.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.222-226
• /
• 1998

$Cu_3N$ film deposited on silicon oxide substrate by r.f. reactive sputtering technique. Synthesis and properties of copper nitride film were investigated for its possible application to Cu metallization as adhesive interlayer between copper and $SiO_2. Cu_3N$ film was synthesized at the substrate temperature ranging from $100^{\circ}C$ to $200^{\circ}C$ and at nitrogen gas ratio above $X_{N2}=0.4. Cu_3N, CuN_x$, and FGM-structured $Cu/CuN_x$ films prepared in this work passed Scotch-tape test and showed improved adhesion property to silicon oxide substrate compared with Cu film. Electrical resistivity of copper nitride film had a dependency on its lattice constant and was ranged from 10-7 to 10-1 $\Omega$cm. Copper nitride film was, however, unstable when it was annealed at the temperature above $400^{\circ}C$.

• Journal of Surface Science and Engineering
• /
• v.39 no.2
• /
• pp.70-75
• /
• 2006

As technology advances, there is a demand for development of hard, solid lubricant coating. (Ti,Cr)N-$MoS_2$, films were deposited on SKD 11 tool steel substrate by co-deposition of $MoS_2$, with (Ti,Cr)N using a D.C. magnetron sputtering process. The influence of the $N_2/Ar$ gas ratio, the deposition temperature, the amount of $MoS_2$ in the films, and the bias voltage on the mechanical and the structural properties of the films were investigated. Wear tests were performed on the films deposited in various conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.97-100
• /
• 2001

This paper presents the characteristics of Ta-N thin-film strain gauges as high-temperature strain gauges, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4∼16 %)N$_2$). These films were annealed for 1 hour in 2x10$\^$-6/ Torr vaccum furnace range 500∼1000$^{\circ}C$. The optimized conditions of Ta-N thin-film strain gauges were annealing condition(900$^{\circ}C$, 1 hr.) in 8% N$_2$ gas flow ratio deposition atmosphere. Under optimum conditions, the Ta-N thin-films for strain gauges is obtained a high resistivity, $\rho$=768.93 ${\mu}$Ω cm, a low temperature coefficient of resistance, TCR=-84 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal gauge factor, GF=4.12.

• Clean Technology
• /
• v.20 no.4
• /
• pp.390-397
• /
• 2014

This study was performed to investigate the effects of fluidizing media on $N_2O$ production in fluidized bed incineration of sewage sludge. The fluidized media were prepared in a form of 2 mm bead by mixing zeolite powders in our lab. Sand having 0.4 mm of the mean size showed 0.44 m/s of minimum fluidization velocity ($U_{mf}$), while the prepared zeolite media 0.5 m/s. When the ratio of fluidizing media height to the inside diameter of the incinerator (bed aspect ratio) increased from 1.4 to 3.1, it was found that $U_{mf}$ of the zeolite media was varied from 0.5 m/s to 0.7 m/s. Under the operation conditions in 1.79 of excess air ratio, $909^{\circ}C$ of bed temperature and ca. 1.65 m/s of superficial velocity, as the weight of fluidizing meadia was increased, $O_2$ concentration in the flue gas was slightly decreased, and $CO_2$ increased. Above 6 kg of fluidizing media weight (1.98 of bed aspect ratio), it was observed that $N_2O$ concentration was significantly reduced, which might result from the decomposition of $N_2O$ on the zeolite media rather than transformation of $N_2O$ to NOx. On the other hand, in a variation of the zeolite media mixing ratio to sand and bed temperature at a constant total bed height, significant difference was exhibited in $N_2O$ emission concentration according to the temperature. Considering the operation temperature in the incineration, the effective calcination temperature of the zeolite media was suggested to be around $900^{\circ}C$.