• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.80-87
• /
• 2001

The fatigue crack growth behavior of the SA516/60 steel which is used for pressure vessels was examined experimentally at room temperature $25^{\circ}C, -30^{\circ}C, -60^{\circ}C, -80^{\circ}C, -100^{\circ}C$ and -l2$0^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. Fatigue crack propagation rate da/dN related with stress intensity factor range ΔK was influenced by stress ratio in stable of fatigue crack growth (Region II) with an increase in ΔK. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are mainly explained by the crack closure and the strengthening due to the plasticity induced and roughness induced.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.220-223
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔK$_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - ΔK in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.e.greatly affect a material with decreasing temperature.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.326-331
• /
• 2001

In this study. CT specimens were prepared from ASME SA5l6 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ in the range of stress ratio of 0.1 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔKsub/th/ in the early stage of fatigue crack growth ( Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da.dN -ΔK in RegionII, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권11호
• /
• pp.1608-1614
• /
• 2014

The objective of this study was to investigate the different dietary ratios of n-6 to n-3 (n-6/n-3) fatty acid (FA) on performance and n-6/n-3 FA in muscles of broiler chickens. A total of 300 one-day-old Cobb chicks were randomly assigned to 3 treatments of 10 replicates in each (10 birds/replicate). Birds were fed on a corn-soybean meal-based diet containing 1% oil during starter (day 1 to 21) and 2% oil during finisher (day 22 to 39) phases, respectively. Treatments of high, medium and low dietary n-6/n-3 FA were formulated by replacing rice bran oil with linseed oil to achieve n-6/n-3 FA close to >20:1, 10:1 and 5:1, respectively. Average daily gain, average daily feed intake, and feed conversion ratio were similar (p>0.05) among the treatments. Serum glucose, cholesterol and triglycerides concentrations were not affected (p>0.05) by dietary treatments. In breast, concentration of C18:3n-3 was significantly greater (p = 0.001) for medium and low vs high n-6/n-3 FA, while concentrations of C20:5n-3, C22:6n-3, total n-3 FA, and n-6/n-3 FA were significantly higher for low vs medium, and medium vs high dietary n-6/n-3 FA. In contrast, concentrations of C18:2 and mono-unsaturated FA (MUFA) were lower for low vs high dietary n-6/n-3 FA. In thigh muscles, concentrations of C20:5n-3 were higher (p<0.05) for medium and low vs high dietary n-6/n-3 FA, and concentrations of C18:3n-3, C22:6, and n-3 FA were greater (p<0.05) for medium vs high, low vs medium dietary n-6/n-3 FA. However, concentrations of C18:1, MUFA, n-6/n-3 were lower (p<0.05) for low and medium vs high dietary n-6/n-3 FA. In conclusion, lowering the dietary n-6/n-3 FA did not affect the performance of chickens, but enhanced beneficial long-chain n-3 FA and decreased n-6/n-3 FA in chicken breast and thigh, which could be advantageous for obtaining healthy chicken products.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.53-62
• /
• 1999

This study was carried out to investigate how to reuse the livestock waste and develop fly ash as a subsitution of sawdust which is used commonly to make compost. Fly ash and sawdust were mixed the ratio of 8 to 2, 7 to 3, 6, to 4, 5 to 5, 4 to 6. 3 to 7 and 2 to 8 after fermentation for 60 days the change of temperature, moisture, pH, organic matter, nitrogen content and C/N ratio were analyzed. The results are as follows; Temperature was reached to maximum (63.5$^{\circ}C$) more quickly in scraper type than in slurry type with adding large sawdust. When fly ash and sawdust were mixed same amount at scraper type and slurry type, moisture was 46.6~53.7% and maintained a good condition for fermentation. pH was showed the range of 7~10 as a mixture of fly ash. Organic matter contents were increased with increasing the added sawdust but did not show any tendency. Nitrogen content was also increased with increasing the amount of added sawdust but did not show any tendency. C/N ratio was increased to 20~60 with increasing the added sawdust, but when sawdust and fly ash were mixed 50:50, there was no significant during fermentation periods. In conclusion, supplementation of fly ash at the level of 50% of sawdust maintained a good condition for fermentation as a livestock waste composting.

• 한국환경농학회지
• /
• 제30권2호
• /
• pp.138-143
• /
• 2011

본 연구는 탄질비가 다른 유기자재를 시용하였을 때 유기재배 벼의 수량과 질소이용율이 미치는 기상 조건의 영향을 조사하기 위해서 2010년에 수행되었다. 처리구는 질소함량 9kg/10a 수준으로 화학비료, 가축분퇴비, 유박1배, 유박2배 (18 kg/10a), 헤어리베치, 베치+호밀을 포함하였다. 유박과 헤어리베치는 가장 낮은 탄질비를 나타내었고 가축분퇴비는 34 : 1의 가장 높은 탄질비를 보였다. 유기자재 처리구의 초기 생육은 양호하였으나 후기 태풍과 같은 기상조건에 따라 전반적으로 생육이 부진하고 수량이 감소하였다. 특히, 유박2배구는 초기생육이 월등하였으나 태풍의 영향으로 도복정도가 가장 심하게 나타났다. 탄질비가 높은 가축분퇴비구는 정상적인 질소공급이 이루어지지 않아 초기생육이 불량하였고 도복하지 않았더라도 낮은 수량을 보였다. 질소흡수량은 유박2배와 베치+호밀구에서 높았고 가축분퇴비에서 가장 낮았으며, 질소이용율도 비슷한 경향을 나타내었다.

• 대한지리학회지
• /
• 제45권5호
• /
• pp.541-552
• /
• 2010

후기 플라이스토신 및 홀로신 시기 동아시아 여름 몬순의 변화를 밝히기 위해 지화학적 분석 방법(탄소동원원소(${\delta}^{13}C$), 탄질율(C/N), 대자율, 입도 분석 등)을 활용하여 서해안 염하구 습지 퇴적물을 분석하였다. 연구 결과에 따르면 한반도에서 여름 몬순은 7,700-7,800년 전에 정점이었고 7,400년 전 경부터 약화되기 시작한다. 그리고 마지막 빙하 최성기 중 24,000-24,500년 전 경에는 몬순이 상대적으로 약했고 18,500-19,500년 전 경에는 상대적으로 강했다. 염하구 습지 퇴적물의 지화학적 분석 자료는 과거 여름 몬순의 변동을 밝힐 수 있는 새로운 고환경 자료로서 가치를 갖는다. 특히 고환경 자료가 부족한 한국 학계에 큰 도움이 될 것으로 사료된다.

• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.85-92
• /
• 1993

Oxynitride glasses in Na-Ca-Si-O-N system were prepared by melting at 135$0^{\circ}C$ for 2 hours in N2 gas. The effects of Si/Na mole ratio and the various Si3N4 contents were investigated. Stable oxynitride glasses can be obtained up to 9wt.% Si3N4 content in case the Si/Na mole ratio was 2.12 and 1.62, but $\beta$-Si3N4 was precipitated at 9wt.% Si3N4 content in case the Si/Na mole rtio was 1.12. Density (p), chemical durability, hardness (Hv), and fracture toughness (KIC) increased with increasing Si3N4 content. In cae the Si/Na mole ratio was 1.12, the increment of properties was remarkable but hardness and fracture toughness did not increase no longer owing to precipitation of $\beta$-Si3N4.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.483-491
• /
• 1992

Plasma silicon oxynitride film has been applied as a final passivation layer for semiconductor devices, because it has high resistance to humidity and prevents from alkali ion's penetration, and has low film stress. Structure properties of plasma silicon oxynitride film have been studied experimentally by the use of FT-IR, AES, stress gauge and ellipsometry. In this experiment,Si-N bonds increase as NS12TO/(NS12TO+NHS13T) gas ratio increases. Peaks of Si-N bond, Si-H bond and N-H bond were shifted to high wavenumber according to NS12TO/(NS12TO+NHS13T) gas ratio increase. Absorption peaks of Si-H bond were decreased by furnace anneal at 90$0^{\circ}C$. The atomic composition of film represents that oxygen atoms increase as NS12TO/(NS12TO+NHS13T) gas ratio increases, to the contrary, nitrogen atoms decrease.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.255-265
• /
• 1995

Stainless steel type 304L has been nitrided in the low pressure (600Pa) and high nitrogen (80% $N_2$+20% $H_2$) environment for 5 hours by the square-wave-pulsed-d.c. plasma as a function of temperature $400{\sim}550^{\circ}C$ and pulsation. At the lower temperature range of $400{\sim}500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period. "S-phase" has been developed in the form of thin nitrided surface layer which has many cracks, leading to be nearly impossible for the industrial anti-wear and anti-corrosion applications. At the higher temperature up to $550^{\circ}C$ with the increasing ratio of the pulse duration to pulse period up to $50{\mu}s/100{\mu}s$, the nitrided layer, whose growth rate has increased also, has been composed mainly of CrN and $Fe_4N$ phases and has become thick, uniform and nearly crack-free.