• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.464-470
• /
• 2005

The numerical analysis is carried out to identify the influence of design factors to shear capacity of cast-in-place (CIP) anchor in ACI 349 Code that is available for the design of fastening system at Nuclear Power Plant (NPP) in this study. The MASA program is used to develop the numerical analysis model and the developed numerical analysis model is verified on a basis of the various test data of CIP anchor. Both $l/d_o$ and $c_1/l$ we considered as design factors. As a result, the variation of $l/d_o$ has no influence on the shear capacity of CIP anchor but $c_1/l$ has a large influence on the shear capacity of CIP anchor, Therefore, it is proved that ACI 349 Code may give a non-conservative results compared with real shear capacity of CIP anchor according to $c_1/l$.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.225-231
• /
• 2012

Fitness-for-Service is a useful technology to determine replacement timing, next inspection timing or in-service when nuclear power plant's buried pipes are damaged. If is possible for buried pipes to be aged by material loss, cracks and occlusion as operating time goes by. Therefore Fitness-for-Service technology for buried pipe is useful for plant industry to perform replacement and repair. Fitness-for-Service for buried pipe is studied in terms of existing code and standard for Fitness-for-Service and a current developing code case. Fitness-for-Service for buried pipe was performed according to Code Case N-806 developed by ASME (American Society of Mechanical Engineers).

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.23-29
• /
• 2004

This paper deals with Reed-Solomon Coding for EUROFIX system EUROFIX is an integrated navigation and communication system, which combines Differential GNSS and Loran-C EUROFIX transmits DGNSS(Differential Global Navigation Satellite Systems) (data by pulse position modulation of Loran-C pulses. Loran-C system is regarded as a satellite backup system in recent. And now, it is important to detect and correct much errors in communication systems. Error corrections or correction algorithm is actively studied nowadays because of this. In this paper, we study and design encoder and decoder of Reed Solomon Code using Finite Galois Field Fourier Transformation for error corrections in EUROFIX data transmission. Through extensive simulation, the designed Reed Solomon code is shown to be effective for error correction in EUROFIX data transmission.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.285-292
• /
• 2007

SoC which deploys software modules as well as hardware IPs on a single chip is a major revolution taking place in the implementation of a system design, and high-level synthesis is an important process of SoC design methodology. Recently, SPARK parallelizing high-level synthesis software tool has been developed. It takes a behavioral ANSI-C code as an input, schedules it using code motion and various code transformations, and then finally generates synthesizable RTL VHDL code. Although SPARK employs various loop transformation algorithms, the synthesis results generated by SPARK are not acceptable for basic signal and image processing algorithms with nested loop. In this paper we propose a SoC platform with an application-specific PLD targeting local operations which are feature of many loop algorithms used in signal and image processing, and demonstrate design process which maps behavioral specification with nested loops written in a high-level language (ANSI-C) onto 2D systolic array. Finally the derived systolic array is implemented on the proposed application-specific PLD of SoC platform.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.157-164
• /
• 1997

This study deals with GPS-photogrammetry practicability by C/A-code reception. It allows data to be acquired and analyzed fast. Combined block adjustment method was applied at the topographical map production of coast-land. And we compared it that of conventional block adjustment. As a result, it was found that accuracy was very sensitive to the arrangement and number of control points. The accuracy in the horizontal and vertical was $\pm{2cm}$ if all of the control points was available. however accuracy was not affected at additional parameters for systematic errors' elimination and it leads to bad results when the number of control points was few and arrangement of control points was not stabilized. GPS observations were added in block adjustment, but the accuracy of block was not upgraded due to the low accuracy of C/A-code reception. So relative positioning method with carrier phases was required for high accuracy and it is expected that CPS photogrammetry with C/A-code will be used widely according to the improvement of observation methods and the development of receiver.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.65-68
• /
• 2000

In CDMA, the currently used PN code acquisition methods detect the phase of the incoming PN signal on the basis of ML estimation. In serial search strategy, it takes relatively long time for PN code acquisition. A study related to reduce processing time of PN code acquisition is important. Therefore we propose a reference code design for a new algorithm that a reference code and the received PN code are fully correlated to detect the transmitted PN code, in detail, the relative phase offset j of c⒡. After choosing two weight factors, we show the mathematical analysis and derivation for the reference code design.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.82-88
• /
• 2008

ARM processors are being utilized in a variety of embedded systems. It is also that most ARM processor accepts C application, and then generates ARM assembly code using GNU gcc Cross-compiler. For the purpose of improving the quality of code generated and the efficient code generation, the various researches are underway. In this paper, we generates the ARM assembly code from the ANSI C programs using Syntax-directed Translation Techniques, and then the performance evaluation results for our research experimental compare to GNU gcc Cross-compiler are described. The techniques are presented in this research compared to GNU gcc cross-compiler very simple and convenient in extension of the production rules.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.8
• /
• pp.307-317
• /
• 2003

We analyze the performance of MC-CDMA and MC-DS/CDMA system on quasi-synchronized moble satellite return link. Quasi-synchronization is considered that chip offset between terminals is within a few chips. In 10-3 BER, performance of MC-DS/CDMA system with walsh code is 0.3dB better than that of MC-CDMA system when the number of user is 5 from -0.5 $T_{c}$ to 0.5 $T_{c}$ quasi-synchronization of MC-DS/CDMA system and from -5/64 $T_{c}$ $^{MC}$ to 5/64 $T_{c}$ $^{MC}$ quasi-synchronization of MC-CDMA system. MC-DS/CDMA system with walsh code is over 0.2dB better than that of MC-DS/CDMA system with extended m code and gold code. MC-CDMA system with walsh code is over 1.2dB better than that of MC-CDMA system with gold code when the number of user is 5 and lower than from -5/32 $T_{c}$ $^{MC}$ to 5/32 $T_{c}$ $^{MC}$ quasi-synchronization.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.482-485
• /
• 2006

다채널 시각비교 수신기(R100-40T, Euro-80)를 이용한 GPS C/A 코드 시각비교 데이터와 Ashtech Z12T 수신기를 이용한 P3 코드 시각비교 데이터를 통합 모니터링함으로서, 간편하게 시각비교 결과를 확인 할 수 있게 GUI(Graphic User Interface) 환경으로 구현하였다. 수신기들은 현재 KRISS(Korea Research Institute of Standards and Science)에서 사용 중인 위성이용 시각비교 수신기들이다. 본 시각비교 통합 모니터링 프로세스를 통해서 GPS C/A code 시각비교 데이터와 P3 code 시각비교 데이터 각각을 비교 분석함으로써 시각비교 결과의 신뢰성을 검증하는데 사용한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.495-508
• /
• 2023

This paper proposes a method to find out the type and location information of Pauli X, Y, Z errors generated in quantum channels using only the quantum information processing part of the multiple-rate quantum turbo short-block code without external help from the classical information processing part. In order to obtain the location information of the Pauli X,Y error, n-auxiliary qubits and n-CNOT gates were inserted into the C[n,k,2] QSBC-QURC encoder. As a result, the maximum coding rate is limited to about 1/2 as the trade-off characteristics. The location information of the Pauli Z error for C[n,k,2] QSBC-QURC was obtained through the Clifford-based stabilizer measurement. The proposed method inherits all other characteristics of C[n,k,2] QSBC-QURC except for the coding rate.