• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.192-200
• /
• 2000

8 bit and 16 bit microprocessors are widely used in the small sited control machine. The embedded microprocessors which is integrated on a single chip with the memory and I/O circuit must have simple hardware circuit and high code density. This paper proposes a 16 bit high code density EISC(Extendable Instruction Set Computer) microprocessor. SE1608 has 8 general purpose registers and 16 bit fixed length instruction set which has the short length offset and small immediate operand. By using an extend register and extend flag, the offset and immediate operand in instruction could be extended. SE1608 is implemented with 12,000 gate FPGA and all of its functions have been tested and verified at 8MHz. And the cross assembler, the cross C/C++compiler and the instruction simulator of the SE1608 have been designed and verified. This paper also proves that the code density$.$ of SE1608 shows 140% and 115% higher code density than 16 bit microprocessor H-8300 and MN10200 respectively, which is much higher than traditional microprocessors. As a consequence, the SE1608 is suitable for the embedded microprocessor since it requires less program memory to any other ones, and simple hardware circuit.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1596-1609
• /
• 2019

The fuel rod performance has great importance for the safety and economy of an operating reactor. The fuel rod performance analysis code, which considers the thermal-mechanical response and irradiation effects of fuel rod, is usually developed in order to predict fuel rod performance accurately. The FRIPAC (${\underline{F}}uel$ ${\underline{R}}od$ ${\underline{I}}ntegral$ ${\underline{P}}erformance$ ${\underline{A}}nalysis$ ${\underline{C}}ode$) is such a fuel rod performance analysis code that has been developed recently by China Nuclear Power Technology Research Institute Co. Ltd. The code aims at the computational simulation of the Pressurized Water Reactor fuel rod behavior for both steady-state and power ramp condition. A brief overview of FRIPAC is presented including the computational framework and the main behavioral models. Validation of the code is also presented and it focuses on the fuel rod behavior including fuel center temperature, fission gas release, rod internal pressure/internal void volume, cladding outer diameter and cladding corrosion thickness. The validation is based on experimental data from several international projects. The validation results indicate that FRIPAC is an accurate and reliable fuel rod performance analysis code because of the satisfactory comparison results between the experimental measurements and the code predictions.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.618-624
• /
• 2010

This paper address the problem of tracking multiple objects encountered in many situations in developing condensation algorithms. The difficulty lies on the fact that the implementation of condensation algorithm is not easy for the general users. We propose an automatic code generation program for condensation algorithm using MATLAB tool. It will help for general user who is not familiar with condensation algorithm to apply easily for real system. The merit of this program is that a that a general industrial engineer can easily simulate the designed system and confirm the its performance on the fly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.469-474
• /
• 2006

In this paper, we develop a method that derive the average sector throughput of HSDPA system. This proposed method reflects the effects of AMC, scheduling and multi-code transmission, and is performed by simple calculation procedures such as link budget analysis. Link budget table is used to estimate a cell coverage in general. We modify the link budget table in order to calculate C/I of the user according to the location of the user in CDMA packet system employing AMC. Furthermore, we utilize the proposed method to analyze the effects of scheduling and multi-code transmission.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.423-430
• /
• 2023

One recent notable method for real-time elimination of ionospheric errors in geodetic applications is the Predicted Global Ionosphere Map (PGIM). This study analyzes the level of accuracy achievable when applying the PGIM provided by the Center for Orbit Determination of Europe (CODE) to the Korean Peninsula region. First, an examination of the types and lead times of PGIMs provided by the International GNSS Service (IGS) Analysis Center revealed that CODE's two-day prediction model, C2PG, is available approximately eight hours before midnight. This suggests higher real-time usability compared to the one-day prediction model, C1PG. When evaluating the accuracy of PGIM by assuming the final output of the Global Ionosphere Map (GIM) as a reference, it was found that on days with low solar activity, the error is within ~2 TECU, and on days with high solar activity, the error reaches ~3 TECU. A comparison of the errors introduced when using PGIM and three solar activity indices-Kp index, F10.7, and sunspot number-revealed that F10.7 exhibits a relatively high correlation coefficient compared to Kp-index and sunspot number, confirming the effectiveness of the prediction model.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.207-215
• /
• 2004

The PLC programming by IEC1131-3 is hard to handle to ordinary users as well as professionals. Also it has not a generality, so that it couldn't be debugging some logic errors easily. In order to be adapted for such environment, In this paper, I have developed the ISPLC(Intelligent Agent System based Software Programmable Logic Controller). In ISPLC system, LD programmed by a user is converted to the C code which can be used in a commercial editor such as Visual C++. The detection of logical errors in C code is more effective than PLC programming itself. ISPLC provides the GUI-based interface in web environment and an easy programming platform to such beginners as well as professionals. The study of code conversion of LD to IL as well as IL to C is firstly tried in the world as well as KOREA. To show the effectiveness of the developed system, I applied it to a practical case, a real time traffic control system. ISPLC is minimized the error debugging and programming time owing to be supported by windows application programs.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.1-10
• /
• 1999

Given a domain, client applications over the Internet are in support of the DNS (Domain Name System) to get its corresponding IP address. Currently, only domain names expressed by ASCII code are recognized over the Internet. This enforces the usage of ASCII domain names even in countries which use languages based on multilingual code other than ASCII code. In this paper, we present a methodology to support multilingual domain names on top of the existing DNS. The methodology is based on code translation of domain names in multilingual code into ASCII code via UTF5. We implement a gateway, called Proxy Hangul DNS (P-HDNS) based on the proposed methodology. This paper presents the principles of the methodology and the implementation details of P-HDNS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.205-215
• /
• 2007

This paper presents low latency and/or computation algorithms of iterative codes of turbo codes, turbo product codes and low density parity check codes for use in wireless broadband communication systems. Due to high coding complexity of iterative codes, this paper focus on lower complexity and/or latency algorithms that are easily implementable in hardware and further accelerate the decoding speed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.703-714
• /
• 2001

In C language, a local buffer overflow in stack can destroy control information stored near the buffer. In case the buffer overflow is used maliciously to overwrite the stored return address, the system is exposed to serious security vulnerabilities. This paper analyzes the process of buffer overflow hacking and methodologies to avoid the attacks in details. And it proposes a device of static buffer overflow detection by using function summary and tracking information flow of buffer domain at assembly source code level(SASS, Static Assembly Source code Scanner) and then show the feasibility and validity of it by implementing a prototype in Pentium based Linux environment.