연료전지 폐스택으로부터 백금을 회수하여 재사용하기 위하여 백금의 농도, pH, 환원제, 분산제의 영향을 살펴본 결과 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm, 10분 조건에서 최적 백금 나노 입자 제조 조건을 확립하였다. 시용 후 폐기된 MEA로부터 산침출을 통해 회수되어진 백금 침출 용액으로부터 백금 모사 용액과 동일한 조건에서 5 nm 이하의 백금 나노 입자를 합성하였다. 백금 모사 용액과 백금 침출 용액으로부터 합성된 백금 나노 입자를 XPS 분석을 통해 백금 이온에서 zero-valent의 백금 나노 입자로 환원되었음을 확인하였다.
Calpuff 역모델링 기법을 이용해 산출된 자료는 오염물질 발생량을 예측할 수 있으며, 여러 가지 자료 비교를 통해 감축 가능성 및 목표 수립이 가능해졌다. 본 연구에서는 동해항 주변지역을 대상으로 Calpuff 역모델링 기법을 이용하여 대기 중 미세먼지 저감량 설정하기 위한 기초자료 구축에 목적을 두었으며, 모델링을 이용한 동해항을 포함한 5개 지역 배출농도 산출결과는 다음과 같다. 대기환경기준인 $50{\mu}g/m^3$을 적용하여 대상 지역별 허용배출량 산출 결과 site-D에서 가장 많은 $4.95{\mu}g/m^2{\cdot}S$의 배출량 저감이 요구되었으며, $4.95{\mu}g/m^2{\cdot}S$의 배출량을 감소시킬 경우 영향예측지점(동해하수종말처리장)의 PM10 평균 예측농도는 $42.6{\mu}g/m^3$로 감소될 것으로 나타났다. site-A(동해항)에서 배출되는 오염물질만을 적용하여 모델링 진행 결과 동해항 주변 민가의 기여농도는 평균 $40{\sim}50{\mu}g/m^3$으로 나타났으며, 배경농도를 고려하면 대기환경기준인 $50{\mu}g/m^3$을 상회 할 것으로 예상됨에 따라 더 이상의 오염물질 배출량은 허용되지 않을 것으로 판단된다. site-B는 상가와 나대지로 차량 통행과 나대지에서 비산되는 먼지로 인해 $0.11{\mu}g/m^2{\cdot}S$의 배출량 저감이 요구되었으며, site-C와 E는 오염물질 저감량은 발생하지 않았으나 지속적인 관리가 요구된다.
한국원자력연구소 내의 연구용 원자로(TRIGA II, III) 해체 시 발생한 방사성 알루미늄 해체 폐기물의 감용 및 제염 특성을 평가하기 위해 아크로에서 알루미늄의 용융 특성 및 방사성 핵종의 분배 특성에 대한 연구를 수행하였다. 알루미늄 폐기물은 흑연전극(graphite electrode)을 이용한 전기아크로에서 4가지 종류의 플럭스$(A:NaCl-KCl-Na_3AlF_6,\;B:NaCl-NaF-KF,\;C:CaF_2,\;D:LiF-KCl-BaCl_2)$를 함께 첨가하여 용융시켰다. 또한 알루미늄의 용융 시 방사성 핵종의 분배 특성을 고찰하기 위해 알루미늄 시편에 방사성 모의 핵종인 코발트, 세슘, 스트론튬의 화합물을 오염시킨 후 혹연도가니에 넣어 알루미늄 용융실험을 수행하였다. 전기아크로에서 알루미늄의 용융실험을 수행한 결과 플럭스의 종류에 따라 다소 차이는 있으나 플럭스의 첨가에 의해 알루미늄 용융체의 유동성이 증가됨을 확인할 수 있었다. 아크 용융에 의해 생성된 슬래그의 발생량은 플럭스 A와 B를 첨가한 알루미늄 용융실험에 비해 플럭스 C와 D를 첨가한 실험에서 상대적으로 많은 양이 생성됨을 알 수 있었으며, 첨가된 플럭스의 양이 증가할수록 이에 비례하여 슬래그의 발생량이 증가함을 알 수 있었다. 슬래그(slag)의 XRD 분석을 통해 방사성 핵종이 주괴에서 슬래그 상으로 이동한 후 슬래그를 구성하고 있는 산화알루미늄과 결합하여 안정한 화합물로 슬래그 상에 포집됨을 알 수 있었다. 알루미늄 폐기물의 용융시 Co의 분배율은 플럭스를 첨가한 경우에 보다 높은 제염계수를 나타냈으며, 모든 플럭스에서 40% 이상의 제염 효과를 나타내었다. 반면에 휘발성 핵종인 Cs과 Sr은 주괴로부터 98% 이상이 제거되어 대부분이 슬래그상과 분진으로 이동되는 특성을 확인할 수 있었다.
The use of recycled aggregate in concrete is gaining much attention due to the growing need for sustainability in construction. In the present study, Self Compacting Concrete (SCC) is made using both natural and recycled aggregate (crushed recycled concrete aggregate from building demolished waste) and performance of recycled aggregate based SCC for the bond behaviour of reinforcement is evaluated. The major factors that influence the bond like concrete compressive strength (Mix-A, B and C), diameter of bar ($D_b=10$, 12 and 16 mm) and embedment length of bar ($L_d=2.5Db$, $5D_b$ and full depth of specimen) are the parameters considered in the present study in addition to type of aggregates (natural and recycled aggregates). The mix proportions of Natural Aggregate SCC (NASCC) are arrived based on the specifications of IS 10262. The mix proportions also satisfy the guidelines of EFNARC. In case of Recycled Aggregate SCC (RASCC), both the natural coarse and fine aggregates are replaced 100% by volume with that of recycled aggregates. These mixes are also evaluated for fresh properties as per EFNARC. The hardened properties like compressive strength, split tensile strength and flexural strength are also determined. The pull-out test is conducted as per the specifications of IS 2770 (Part-1) for determining the bond strength of reinforcement. Bond stress versus slip curves were plotted and a typical comparison of RASCC is made with NASCC. The fracture energy i.e., area under the bond stress slip curve is determined. With the use of recycled aggregates, reduction in maximum bond stress is noticed whereas, the normalised maximum bond stress is higher in case of recycled aggregates. Based on the experimental results, regression analysis is conducted and an equation is proposed to predict the maximum bond stress of RASCC. The equation is in good agreement with the experimental results. The available models in the literature are made use to predict the maximum bond stress and compare the present results.
본 연구는 방사성 폐기물 처분장의 지하수 화학 조건을 조절하는 수리지구화학 특성을 규명할 목적으로 수행되었다. 이를 위해 처분장 주변의 관측공 중 12개의 관측공이 선정되었으며, 이들 시료를 심도별로 총 46 지점에서 채취하였다. 또한 지표수 3점과 해수 1점의 시료도 채취하였다. 채취된 시료는 양/음이온 분석이 수행되었으며, 물과 용질의 기원을 규명할 추적자로서 산소-수소, 삼중수소, 탄소, 황 동위원소도 분석되었다. 산소-수소 동위원소 분석 결과 지표수와 지하수는 모두 강우 기원임을 보여주었으며, 삼중수소 농도는 깊이가 깊어짐에 따라 감소하고는 있으나 높은 삼중수소 농도는 최근에 충진된 물임을 나타내고 있었다. 양/음이온 분석 결과를 통한 수질 유형 분석에서는 연구 지역 지하수는 Ca-Na-$HCO_3$ 유형과 Na-Cl-$SO_4$ 유형이 대표적이었으며, 상관 분석 결과 이들 이온은 해염, 물-암석 반응의 영향을 받은 것으로 판단된다. 특히 연구 지역에서 Na 비율이 높은 이유는 양이온 교환 반응에 의해 이루어지고 있음을 보여 주었다. 연구 지역의 산화-환원 조건의 경우에는 심도가 깊어짐에 따라 낮은 DO와 Eh 값을 나타내어 환원 환경이 형성되었음을 나타내며, 높은 Fe와 Mn의 농도는 Fe와 Mn 산화물의 환원 반응이 산화-환원 조건을 조절하고 있음을 보여주었다.
$\gamma$-FeOOH suitable for magnetic recording media was synthesized using waste acid which is the by-product of the iron works factory. Effects of concentration of the acid and alkali and reaction temperature on the particle properties of $\gamma$-FeOOH and magnetic properties of $\gamma$-$Fe_2O_3$ were studied. $\gamma$-FeOOH single phase was formed below 1M of acid concentration with 1M of alkali concentration and at 0.4M of acid concentration with 4M of alkali concentration. While the width of acicular particle was increased, the length of acicular particle was decreased with diluting acid concentration. The magnetic properties of the $\gamma$-$Fe_2O_3$ improved with increasing acid concentration. $\gamma$-FeOOH single phase was formed in the temperature range of 30 to $80^{\circ}C$. The length of the particle was decreased with increasing temperature. $\gamma$-Fe2O3 produced from dehydration of $\gamma$-FeOOH showed bad magnetic properties due to the presence of many pores in the particle. But with successive reduction and oxidation of $\gamma$-$Fe_2O_3$ produced from dehydration of $\gamma$-FeOOH, $\gamma$-$Fe_2O_3$ showed good magnetic properties.
Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.
The Biochemical Methane Potential (BMP) of fresh leachate and domestic wastewaters codigestion was determined by laboratory Bach Tests at $35^{\circ}C$ over a period of 90 d using a wide range of leachates volumetric ratios from 0% to 100%. To simulate wastewaters plant treatment step, all the ratios were first air stripped for 48 h before anaerobic incubation. The kinetic of biogas production was assessed using modified Gompertz model and exponential equation. The results obtained showed that cumulative biogas production was insignificant in the case of wastewaters monodigestion while the codigestion significantly improves the BMP. Air stripping pretreatment had positive effect on both ammonium concentration and volatiles fatty acids with reduction up to 75% and 42%, respectively. According to the Modified Gompertz model, the optimal anaerobic co-digestion conditions both in terms of maximal biogas potential, start-up period and maximum daily biogas production rate, could be achieved within large leachate volumetric ratios from 25% to 75% with a maximum BMP value of 438.42 mL/g volatile solid at 50% leachate ratio. The positive effect of codigestion was attributed to a dilution effect of chemical oxygen demand and volatile fatty acid concentrations to optimal range that was between 11.7 to $32.3gO_2/L$ and 2.1 to 7.4 g/L, respectively. These results suggested that the treatment of fresh leachate by their dilution and co digestion at wastewaters treatment plants could be a promising alternative for both energetic and treatment purposes.
공학적 안전설비 공기정화계통의 규제지침인 Reg. Guide 1.52(Rev.3)의 변경사항중 성능시험과 관련한 운전가능성 시험시간 단축, HEPA 필터 현장누설시험용 시험물질 변경 및 활성탄 성능시험 Methyl Iodidie 투과허용율 상향 변경을 영광 5,6호기에 적용하고자, 모사실험장치와 현장 설비를 활용하여 기술적 타당성을 확인하는 실험을 수행하였다. 10시간 이상의 장시간 운전가능성 시험을 통해 계통내 습분을 제거하여도 시험후 1~4일만에 회복됨을 확인하여 운전가능성 시험은 기기적 운전가능성 점검에 적합한 매월 15분 이상의 시험을 수행하는 것이 타당함을 확인하였다. HEPA 필터 현장누설시험용 시험물질 변경을 위해 DOP와 PAO의 에어로졸 입자크기, 발생량, 누설인지도를 비교한 결과 PAO는 원전에서도 DOP 대체시험물질로 사용 가능함을 확인하였다. 베드깊이 4 인치 이상의 활성탄여과기에 대한 Methyl Iodide의 투과율 허용치가 0.175 %에서 0.5 %로 상향 변경된 것은, ASTM D3803(1989)으로의 활성탄 성능시험 방법 변경에 따른 것으로서, $30^{\circ}C$ 상대습도 95 %에서의 Methyl Iodide 투과허용율 0.5 %가 사용 중 활성탄의 성능을 시험하기에 충분히 보수적인 시험방법임을 확인하였다. 본 실험 결과를 바탕으로 영광 5,6호기는 인허가변경을 완료하였다.
This study is (a) to describe the history of Total Quality Management (TQM) generated in the industry, health care service, and nursing society ; (b) to define the concept, total quality management including the definition of quality ; (C) to explain the each principle of TQM theory developed by main theorists, E. Deming, J. Juran, and B. Crosby ; (d) to give the examples related to TQM implementation at the health care organization ; and (e) to mention the extent to which the health care organizations are able to evaluate their cultural organization toward TQM and have had the way to measure the effect of TQM implementation. TQM referred to Continuous Quality Improvement(CQI), Quality Improvement(QI), and Total Quality Improvement(TQI), was not recognized by experts in the United States industry, but by economists in Japan until the end of the 1970's. However, the United States' government led to introduce the principles of TQM to general industry as well as health care service area so that TQM became a main philosophy to manage the organizations in health care service. TQM is a structured, systematic process for creating organization-wide participation in planning and implementing continuous improvement in quality. E. Deming established the "Chain reaction in Quality" and the fourteen point of TQM. The Chain reaction in quality is to describe the relationship among the reduction of waste, rework, and delay, quality improvement, customer satisfaction, and productivity. There are fourteen points to explain the principles of TQM by E. Deming. Juran defined the "Quality Trilogy" to improve the level of quality in any organization. Quality Trilogy has three steps such as quality planning, quality control, and quality improvement for implementing the TQM projects. Crosby describes his TQM theory by establishing "Four Absolutes" and "Fourteen steps in TQM" implementation. Until now, most healthcare organizations have made efforts to organize the TQM task team and to implement TQM principles with various issues. There are three priorities to select the TQM issues : High-volume, High-risk, and Problem-prone. However, there is no absolute, credible measurement yet to evaluate the effects of TQM implementation in health care organization regardless of the classification of health care organizations, geographical background, and social influence. Thus, developing the evaluation way in terms of TQM is the foremost task in health service area. The most important thing for TQM implementation in the organization is to settle up the concept, cultural transformation from traditional management toward quality.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.