• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.121-125
• /
• 2004

The preprocessor - solver - postprocessor software for 2D/Axisymmetric CSCM Upwind Flux Difference Splitting Navier-Stokes code has been developed for undergraduate educational purpose. This computational fluid dynamics (CFD) software allows students to setup, solve, visualize and control dynamically server for their own fluid problems via Internet. The preprocessor Is capable of generating geometry and grid, initial solution data and required solver control parameters. The postprocessor shows vector plot and contour plot with different options while residual plot shows root-mean-square (RMS) error history graphically and retrieves the data from solver interactively. Special feature of the preprocessor is grid generation part which is based on MFC/Visual C++ application and FORTRAN single block grid generator process. Many users can access solver via Internet from client computers and solve desired problems using locally installed pre- and postprocessor and remote powerful solver part.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.113-121
• /
• 2000

A compact pre- and post-processor that runs on PC has been developed for the purpose of remote CAE. This includes a linear-finite-element-analysis module for on-site analysis of simple and midium-sized structural problems and an interfacing module for remote analysis of more complex cases such as nonlinear and large-scale linear problems which are cpu-consuming to solve. The software was designed to provide convenient interfacing capability for the use of client-server-type analysis. In this paper, the interface module was specially designed to use ABAQUS on the supercomputer. As a benchmark for the remote CAE, a sheet-forming simulation was perfomed on a PC networked with the supercomputer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.113-116
• /
• 1999

This paper presents a hardware architecture of AAL(ATM Adaptation Layer) type 2 switch. The proposed architecture can assign and configure maximum AAL2 CID limit. AAL2 is the protocol which has been recommended by ITU-T and ATM-Forum for low bit rate delay sensitive services. The architecture assumes 155 Mbps STM-1/STS-3c physical interface, maximum VCC can be 64K connections. It can support maximum 16,384M AAL2 connections. For efficient use of peripheral memory, a concept of segment address was proposed. The proposed AAL2 switch hardware architecture can be used in ATM network as a standalone server or embedded module in a ATM switching system.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.10-20
• /
• 1994

This paper describes a design and implementation of the DFR(Document Filing and Retrieval) system. one of applications of DOAM(Distributed Office Application Model) which is the international standard in ISO(International Standards Organization). On the basis of the international standard, the DFR system is implemented on SUN workstation and PC/386 with C language, and its implementation is verified by tracing the association descriptor and primitives of service elements when its operation is tested between client and server. The result of this study shows that the DFR system can be implemented on the basis of the international standard, and makes a contribution toward the establishment of functional standards for the DFR system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.255-257
• /
• 2006

This paper proposed a platform which includes both Network processor and DSP for flexible IED. The Network processor is one of the Intel's IXP4XX Product Line family and the DSP is one of the TI's C6000 family. An embedded Linux is ported in Network processor so that a DSP program can be downloaded to Network processor through ethernet and then downloaded to DSP. Using this method, various algorithms according to IED can be applied to the Network processor board. Maximum ten ADCs can be connected because there is a CPLD between DSP and ADC. That is, the network processor board which can measure maximum 40 channels is implemented. In DSP program, thread and double buffering methods are used not to miss voltage samples. The Network processor board is verified using a method that eight channel voltage signals converted to digital are transmitted to server through both DSP and IXP425.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권4호
• /
• pp.2199-2203
• /
• 2016

One of the most common cancer types faced by the women around the world is breast cancer. Among the several low, moderate and high penetrance genes conferring susceptibility to breast cancer, PTEN is one which is known to be mutated in many tumor types. In this study, we predicted and analyzed the impact of three deleterious coding non-synonymous single nucleotide polymorphisms rs121909218 (G129E), rs121909229 (R130Q) and rs57374291 (D107N) in the PTEN gene on the phenotype of breast tumors using computational tools SIFT, Polyphen-2, PROVEAN, MUPro, POPMusic and the GETAREA server.

• Management Science and Financial Engineering
• /
• 제12권2호
• /
• pp.1-18
• /
• 2006

We consider an $M^x/G/1$ queueing system with Bernoulli vacation schedule under multiple vacation policy. where after each vacation completion or service completion the server takes sequence of vacations until a batch of new customer arrive. This generalizes both $M^x/G/1$ queueing system with multiple vacation as well as M/G/1 Bernoulli vacation model. We carryout an extensive analysis for the queue size distributions at various epochs. Further attempts have been made to unify the results of related batch arrival vacation models.

• 한국정보관리학회:학술대회논문집
• /
• 한국정보관리학회 2005년도 제12회 학술대회 논문집
• /
• pp.295-304
• /
• 2005

XQuery는 W3C에서 가장 최근에 발표한 XML 질의 언어 표준 초안으로 다양한 형태의 XML 데이터소스에 폭넓게 적용할 수 있도록 설계되어 있다. 또한 XQuery는 데이터 내용뿐만 아니라 구조 검색에 대해 경로 질의를 이용하여 쉽고 간단하게 처리할 수 있는 특징이 있다. 본 연구애서는 XQuery를 지원하는 XML 검색시스템을 설계 및 구현하고, 개발된 시스템(Litch Search Server)을 INEX 2004를 통해 구조적인 질의에 대한 성능을 평가하여 그 개략적인 결과에 대하여 기술하고 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.623-624
• /
• 2006

Over the past decade, changes in product development processes and increased consumer demands have dramatically influenced engineering working practices and targets. The information technology revolution has made its appearance concurrent to this relentless escalation in product engineering requirement. It has offered hopes for improved productivity despite these increasing demands. The wide availability of personal computing power, virtually inexhaustible sources of information and an abundance of computerized engineering tools have created great expectations. CAPP (Computer Aided Process Planning) Expert system and database were developed using VB.NET and Microsoft SQL 2000 Server.

• 한국통신학회논문지
• /
• 제27권11C호
• /
• pp.1040-1045
• /
• 2002

This paper focuses on a hash-based, distributed Wet caching network that eliminates inter-cache communication. An agent program on cache servers, a mapping program on the DNS server, and other components comprised in a distributed Web caching network were modified and developed to implement a so-called "consistent" hashing. Also, a dynamic load balancing algorithm is proposed to address the load-balancing problem that is a key performance issue on distributed architectures. This algorithm effectively balances the load among cache servers by distributing the calculated amount of mapping items that have higher popularity than others. Therefore, this developed network can resolve the imbalanced load that is caused by a variable page popularity, a non-uniform distribution of a hash-based mapping, and a variation of cache servers.