• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.579-585
• /
• 2020

In this study, we used byte-inversion transmission method to prevent the flicker of lighting source in a visible light data communication link. In the transmitter, the non-return-to-zero (NRZ) signal with 9.6 kbps was on-off keying (OOK) modulated with a 100 kHz square wave carrier and byte-inversion signal was added after each byte to make the average optical power of the light-emitting diode (LED) constant. In the receiver, we used a band-pass filter to eliminate the interference of the 120 Hz noise which was induced from the adjacent light lamps, and an OOK demodulator to recover the original NRZ signal This scheme is useful in constructing wireless data networks using the illumination of visible light lamps.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.316-323
• /
• 2018

In this paper, we newly introduce the three-level byte-inversion transmission method for preventing LED flicker in visible light communication (VLC). The VLC transmitter sequentially sends the original signal and the inverted signal in byte units using a three-level LED modulator. The average optical power of the LED is kept constant during data transmission, thus flicker-free. In the VLC receiver, the original data is easily recovered using a simple comparator. This structure is very simple because additional clock or carrier is not required for flicker prevention. The developed flicker prevention scheme could be very useful for constructing the flicker-free indoor VLC system in low cost.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.1-10
• /
• 2001

This paper describes new line code algorithm, called NIDI(Nibble Inversion mock Inversion) which is well suited for interconnection and transmission technology, The proposed line code which includes only one redundancy bit serves primary features of line code and synchronization patterns for byte or frame synchronization in interconnection, Also, this line code provides in-band signals and speciaI characters.

• Journal of Sensor Science and Technology
• /
• v.27 no.3
• /
• pp.175-181
• /
• 2018

In this paper, we introduce a new dimming control method in a visible light communication (VLC) system wherein byteinversion is adopted for flicker-free transmission. In the VLC transmitter, the original and the inverted data were sent sequentially and the remnant time in one period was used for the dimming control of the LED light. In the VLC receiver, only the original data was recovered using the gating signal whose width was the same as the length of the original data. In our experiments, the dimming control ranges were measured to be 22%-53%, 11%-76%, and 5%-88% of the CW LED light when the data rates were 9.6, 19.2, and 38.4 kbps, respectively. In this system, we used a 240-Hz sync pulse whose period was 4.16 ms, which was shorter than the maximum flickering time period of 5 ms that is generally considered to be safe. This configuration is very simple and useful in constructing indoor wireless sensor networks using the flicker-free LED lamps with dimming control capability.