• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.240-247
• /
• 2005

Today's hightech society requires thousands of different products which ultimately result in billions of tons of materials discarded, most of which end up in landfills. Therefore industrial circles could not help thinking about environmental problems by regulations of government or pressures of consumer. Generally, the related research subjects are classified into both of environmentally conscious manufacturing and product recovery, where product recovery aims to minimize the amount of waste sent to landfills by recovering materials and parts from old or outdated products by means of recycling and remanufacturing (including reuse of parts and products). In this research, we constructed a model for remanufacturing various goods using a single facility and developed a dynamic programing(DP) algorithm based upon the optimal solution characterization. We showed the efficiency of the developed DP algorithm with a numerical example.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.4
• /
• pp.42-48
• /
• 2014

Sewage treatment facilities can purify sewage enough to be send to river or sea water, that discharged from human life and industrial activities. In the sewage treatment process, we can get large amount of by-product energy resources and materials such as heat of sewage, digester gas and purified water etc., it can be utilized by applying various technologies thereby we can reduce energy consumption in the process. In this paper, it was analyzed using the data collected from the operational case study for the energy savings effect that can be obtained when using the digester gas, one of the by-product materials of sewage treatment process, for electric power generation. Cost of 623million won is an annual reduction of 4,032MWh corresponding 9% of the annual electricity consumption of the sewage treatment plant, such an alternative power generation using digester gas was proposed in this paper has been verified the feasibility of the proposed reduction of energy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.256-260
• /
• 2011

ZnO nanostructures with tetrapod, needle and multipod shapes were synthesized without catalysts through a simple thermal oxidation of metallic Zn powder in alumina crucible under air atmosphere. X-ray diffraction data revealed that the ZnO nanostructures had wurtzite structure of hexagonal phase. Energy dispersive X-ray (EDX) spectra showed that the ZnO was of high purity. After the oxidation of Zn powder, white colored product was mainly observed and yellow colored product was observed only a very little on the surface of the oxidized source materials. The white product consisted of tetrapods, while yellow product was composed of needles and multipods. Cathodoluminescece spectra showed that the crystalline quality of tetrapods was better that those of needles and multipods.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.131-148
• /
• 2021

Upcycling is a sustainable way to recycle waste resources and solve the global problem of environmental pollution. Upcycling is now attracting attention as fiberization and the disposal of waste clothing have become a serious issue. However, the customer's willingness to purchase upcycled products should be increased by propagating that the product value of a reborn commodity is of high value; these products are meant for new purposes and prepared with recycled materials. In this study, we created 11 designer items by applying an eco-friendly concept in the design process of upcycled textiles and products. From 2020 to 2021, a PBL(Problem Based Learning) curriculum was taught in design planning classes. The final 11 design items were derived after developing an eco-friendly product design for upcycled textiles. These final items were as follows: 5 fashion bags, 3 dog products, 1 clothing, 1 fashion accessory, and 1 sanitary mask design. In order to develop only one aesthetic design idea for upcycling, we considered the following features: user-centered convenience, functionality, and practicality. Then, tie-dye, drawing, patchwork, and embroidery were used to create innovative design items. The product design of recycled materials is based on high functionality, waterproofing, and the use of organic natural materials. The results of this study indicate that the creative product design of upcycling has contributed to a sustainable and eco-friendly environment. Related research studies must be conducted for innovating the continuous design process of the future.

• Laser Solutions
• /
• v.16 no.3
• /
• pp.22-26
• /
• 2013

Fiber laser welding was performed on SUS Materials metal bellows. The results can be summarized as follows: When we tried to change welding focus location. we get the best welding line when focus location placed 0mm. In product welding, We could make a satisfactory product in constant area by applying optimized conditions and show a table that is able to help producer easily to apply it to manufacturing. In comparison with existing TIG and plasma welding, welded bellows by fiber laser has faster processing speed, smaller thermal effect, very narrow welding area and fine surface.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.227-230
• /
• 1998

Alumina($Al_2O_3$)-Titanium Diboride($TiB_2) particulate composites were fabricated by hot pressing of the powder mixture that was prepared from Self-propagating High Temperature Synthesis (SHS) product and commercial powders. Their propeties were examined in order to find feasibility of using SHS for making the high performance ceramic composite. $TiB_2 particles obtained by grinding the SHS product were finer than the commercial powders. Hot pressed sample containing the SHS products exhibited higher strength than the one prepared from the commercial powders.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.203-212
• /
• 2005

In the highly developing industrial society the design has been playing the central role in the managerial strategy of a company and has been one of the central agendas in determining the economical competence of a country, and it is also regarded as a means to acquire sustainable superior competence And these trends suggest that the esthetic value of a product has become more important than the technological function. In this study we review theoretically esthetic factors influencing the preference of a product, so that we can make a list of eight esthetic factors based on the various referential studies. They are simplicity, balance, unity, rhythm, style, novelty, typicality, and proportion. We research esthetic factors affecting consumers' preferences and evaluation of a product and typical esthetic factors specific to the characteristics of each product. Therefore, in this study we tried to provide available materials in developing product design by present of esthetic guideline and to put this materials to practical use in product design by finding considered elements and importance of esthetic factors which had important effects on the tastes of the consumers classified by manufactures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.21-28
• /
• 2008

The exchangeability of subassembly has a good relationship with the modularization of product. This relationship can be found by the analysis of the characteristics of a product. The weight for decision factors for the modularization can be determined by the exchangeability of a product or subassembly. The functions, structure, materials of subassembly are used as the decision parameters of exchangeability. Using these selected parameters, the modularization of a product, the characteristics of product structure, and the product function are analyzed. And then, the weighting factors could be calculated quantitatively using this relationship and the parameters of the exchangeability. The calculated weight can contribute to help a designer design for recycling (DFR), design for energy (DFE) and Eco-design.

• Journal of the Korean housing association
• /
• v.25 no.2
• /
• pp.71-78
• /
• 2014

In recent years, Korean government has focused on improving the environmental impact of products in order to reduce greenhouse gas emissions and to achieve their energy goals. The government has been conducting the following polices such as green procurement inducement and certification system. After carbon labeling was conducted in 2009, among a total of 1,065 items, 97 building materials have been given a certification: finishing materials items have the highest weight (56%). The increase in the certification numbers shows that there has been considerable technical efforts in the building material industry. At the awareness of carbon label and purchase of low carbon product, however, customers are aware of carbon labeling but the purchasing rate of carbon product is low. In this paper, we suggest that low carbon activities must also be considered in order to create client value by adding the concept of ecological efficiency. The objective of this study to measurer the eco-efficiency of carbon labeled building materials on the basis of environmental aspects of the product with the perspective of economy for purchasing the excellent products.

• Journal of Science of Art and Design
• /
• v.8
• /
• pp.185-210
• /
• 2005

Closely connecting Well-Being culture with our traditional eating culture. we can predict next generation Kimchi refrigerator trend with this research. In the highly developing industrial society, design has been playing the central role in the managerial strategy of a company and has been one of the central agendas in determining the economical competence of a country, and has also been regarded as a means to acquire sustainable superior competence. Thus, these trends suggest that the aesthetic value of product has become more important than its technological function. In this study we reviewed theoretically esthetic factors influencing the preference and the evaluation of a product and made a list of eight esthetic factors based on various referential studies which include simplicity, balance, unity, rhythm, style, novelty, typicality, and proportion. Also on the point of view of design, it is necessary to find out definitely the consumer preference frame the relationship among design preference design image design attribute. Will give you guidelines on which designers can select and design some more objective and reliable design factors, finding out the relation of cause and effect by which they can know what kind of product designs their consumers like and how the popular image which that product offer is composed of. We investigated the esthetic factors affecting consumers preferences and the basis for evaluating a product. Aimed at providing materials for developing product design by presenting an ,esthetic guideline product design by presenting an esthetic guideline and to put these materials to practical use. Investigated other considered elements classified by manufactures and importance of esthetic factors and its influence on consumer tastes . All of these result, It could not conclude all of the adjective design image and design factors of every consumer, but through consumer reaction framework consumer are response and prefer the products which design image have. and then understand prefered design image are influenced to design factor's and could be apply to new design development.