• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.96-96
• /
• 2010

We report the proper resistance-area products in the single crystalline bcc CoFe/MgO tunnel contact on nondegenerate n-Ge desirable for efficient spin injection and detection at room temperature. The electric properties of the crystalline CoFe(5 nm)/MgO(1.5,2.0,2.5 nm)/n-Ge(001) tunnel contacts have been investigated by I-V-T and C-V measurements. Interestingly, the tunnel contact with the 2-nm MgO exhibits the ohmic behavior with low resistance-area products, satisfying the theoretical conditions required for significant spin injection and detection. This result is ascribed to the presence of MgO layer between CoFe and n-Ge, enhancing the Schottky pinning parameter as well as shifting the charge neutrality level.

• 한국의류학회지
• /
• 제43권1호
• /
• pp.95-111
• /
• 2019

This study is the 2nd report following "A Study on the Characteristics of Material in the Korean Up-cycling Fashion Brands (Part I)" that handled the development of upcycling props using the characteristics of upcycling material. The 2nd report analyzed product types and materials focusing on 21 foreign upcycling fashion brands. It analyzed the characteristics of upcycling fashion materials using the case analysis of coffee bean bag and waste denim based on external characteristics and internal characteristics. We then classified the external characteristics into environment/economic feasibility and availability/mixture and the internal characteristics into historicality/story and originality/scarcity. Five bags were designed and produced for the actual commercialization of fashion products based on such characteristics of materials, with the use of coffee bean bags and waste denim as upcycling materials. This study is differentiated from existing research by its suggestions for the utilization of fashion product upcycling coffee bean bags and waste denim. Also, upcycling fashion products could be competitive products in eco-friendliness and originality that can be a driving force for the sustainable development of fashion industry through the differentiation of existing fashion products.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.363-369
• /
• 2022

AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a high-quality additive manufacturing product.

• 보존과학회지
• /
• 제22권
• /
• pp.5-14
• /
• 2008

본 연구에서는 박물관 내장재료, 유물포장시 사용되는 포장재료에서 나오는 실내대기오염물질로 챔버 테스트 및 오디 테스트를 실시하였다. 오디 테스트 결과 금속에 따라서 목재나 시멘트에 의해 부식되는 형태가 다르게 나타난다는 것을 알 수 있었으며, 금속의 부식에 가장 많은 영향을 미친 목질제품은 18T HS(E0)와 9mm합판(F0,E0)이었으며, 시멘트는 6개월이 지난 시멘트였다. 유해가스 챔버 테스트 결과 대부분의 시편에서 부식이 관찰되었으며, 특히 포름산, 아세트산, 아세트알데히드에서 철, 구리, 청동시편의 부식이 심각하게 진행되었다. 포장재의 폭로실험에서는 저습의 조건에서 표면적으로 큰 변화가 나타나지 않으나, 고습의 조건에서는 금속 시편이 변색되거나 부식되는 현상이 나타났다.

• 열처리공학회지
• /
• 제25권4호
• /
• pp.181-189
• /
• 2012

The demand on quantitative measurement of the heat flux is motivated in making higher-quality steel product through a water quenching process of plate mill. To improve a spatial degree of heat flux measurement, the multi-point heat flux measurement was carried out by a unique experimental technique that has a combination of the existing single-point heat flux gauge. The corresponding heat flux can be easily determined by Fourier's law in a conventional way. The multi-point heat flux gauge developed in this study can be applicable to measure the surface heat flux, the surface heat transfer coefficient during a water quenching applications of steelmaking process. The results exhibit different heat transfer regimes; such as single-phase forced convection, nucleate boiling, and film boiling, that are occurred in close proximity on the multi-point heat flux gauge quenched by water impinging jet.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.121-127
• /
• 2017

Gadolinium tetraboride ($GdB_4$) was synthesized by reduction of $Gd_2O_3$ using boron carbide in presence of carbon. Effect of temperature on product quality was investigated. Pure $GdB_4$ powder was obtained in vacuum at $1500^{\circ}C$. Pressureless sintering experiments revealed that sintering takes place only above $1600^{\circ}C$. A maximum density of 77.1% of the theoretical value was obtained at $1800^{\circ}C$ by pressureless sintering. Hot pressing resulted in 95.5% of theoretical density at the lower temperature of $1700^{\circ}C$ under 35 MPa pressure. Hardness and fracture toughness of dense $GdB_4$ were measured and found to be 21.4 GPa and $2.3MPa{\cdot}m^{1/2}$, respectively. After exposure to air at $900^{\circ}C$, the formation of a porous and non-protective oxide layer was observed.

• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.309-314
• /
• 2006

We synthesized lithium zirconate using solid-state reaction and analyzed thermal properties (TG/DTA) of starting materials and the synthesized one. When $Li_2ZrO_3$ powder was exposed to $CO_2$ environment at $500^{\circ}C$, 93% of the theoretical absorption weight was gained within 280 min with fairly high sorption rate. Almost all the absorbed $CO_2$ was generated by heating the sample to $800^{\circ}C$. We also investigated densification behavior of $Li_2ZrO_3$ under $CO_2$ environment. By sintering $Li_2ZrO_3$ at $760^{\circ}C$ using 2-step process, we obtained dense product, composed mainly of $Li_2ZrO_3\;and\;ZrO_2$, with relative density of 92%.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.268-272
• /
• 2008

Interfacial characteristics of aluminum borate whisker reinforced AS52 matrix composite was investigated. Peak hardness of AS52 composite was obtained aging at $170^{\circ}C$ for 15h and the aging process was accelerated by the presence of the aluminium borate whisker. The MgO layer, which was the interfacial reaction product between the reinforcement and the Mg matrix, was produced with 20 nm thickness in as-cast condition. As the aging time increased, the thickness of the interfacial reaction layer increased to 50 nm in peak aged condition. The nano-indentation test results indicated that the strength of interface was improved by the aging but over-aging degraded the reinforcement and decreased the interfacial strength which resulted in the decrease of overall composite strength.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.130-133
• /
• 2008

Corrosion of silver by outgassed sulfur species from rubber has been investigated by means of quartz crystal microbalance technique (QCM) and cathodic reduction technique. Silver specimens were placed together with a rubber of predefined quantity in an enclosed environment. Corrosion progressed linearly with time and silver sulfide was found as the corrosion product during all the tests. No significant dependence on RH was observed, while the corrosion rate increased as temperature rose. Furthermore the corrosion rate increased logarithmically with the quantity of the rubber placed in the exposure environment. It may be suggested that the corrosion rate of silver is determined by the amount of outgassed sulfur species which is a function of temperature and the quantity of rubber contained in the exposure environment.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.152-160
• /
• 2011

Contemporary architecture pursues new method of Interpretation of Non-linear space as digital media appears. As various materials and new methods can be used due to developments in science and expansion of thinking, contemporary architectural color developed extensive possibilities. It means not only the change of drawings, method of architectural product and materials but also the change of value system for architectural space. Thus the purpose of this paper is to suggest interpretation of space applied by color structure, and this point of view was based on the three elements of color perception which are light source, reflector, and observer. According to this categorization, architectural color of exterior color, layer color and interaction color are explained via examples of colors recently used on the contemporary architectures. In summary, contemporary architecture can be explained by Non-construction space interpretation for intrinsic complex meanings. Therefore, it can be explained as moving space, collage, by picturesque space, moving blur color and emptiness of color. This pursues various point of views for space interpretation, therefore it can be developed to the identity of strengthening architectures' design concept.