• 한국포장학회지
• /
• 제27권2호
• /
• pp.91-100
• /
• 2021

Agricultural corrugated fiberboard packaging boxes frequently experience damage due to loading and unloading, vibration during transport, and shock by dynamic distribution condition change. This study was carried out to estimate effect of vibration during distribution process on compression strength of corrugated fiberboard boxes for agricultural products. In order to identify the degradation caused by vibration, after box packaging the agricultural products(tangerine or cucumber), the natural frequencies of the packaging boxes were measured by varying the relative humidity(50, 70 and 90%) at 25℃ temperature. Various types of corrugated fiberboard boxes were packed with tangerines and cucumbers, and the PSD plot vibration tests were conducted by utilizing the actual vibration recording results of the Gyeongbu Expressway section between Seoul and Gimcheon. As a result of the experiment, the decrease in compression strength of the box was relatively low in DW-AB, and the decrease in compression strength of the SW-A 0201(RSC) type box was the highest at 20.49%. In particular, both SW-A and DW-AB showed low compression strength degradation rates for open folder type boxes. The moisture content varies depending on the type of the box or agricultural products, and the enclosed 0201(RSC) type box was generally higher than the open folder or bliss type box, which is believed to be the reason for the decrease in compression strength of RSC type box due to humidity. By the agricultural product, the percentage of decrease in compression strength of box packed with cucumbers was especially high.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp.573-582
• /
• 2022

The geometry of the gravity-type anchorage changes depends on various factors such as the installation location, ground type, and relationship with the upper structure. In particular, the anchorage geometry embedded in the ground is an important design factor because it affects the pull-out resistance of the anchorage. This study examined the effect of four parameters, related to anchorage geometry and embedded ground conditions, on the pull-out resistance in the gravity-type anchorage through two-dimensional finite element analysis, and presented a guide for major design variables. The four parameters include the 1) flight length of the stepped anchorage (m), 2) flight height of the stepped anchorage (n), 3) the anchorage heel height (b), and 4) the thickness of the soil (e). It was found that as the values of m increased and the values of n decreased, the pull-out resistance of the gravity-type anchorage increased. This trend is related to the size of the contact surface between the anchorage and the rock, and it was confirmed that the value of n, which has the largest change rate of the contact surface between the anchorage and the rock, has the greatest effect on the pull-out resistance of the anchorage. Additionally, the most effective design was achieved when the ratio of the step to the bottom of the anchorage (m) was greater than 0.7, and m was found to be an important factor in the pull-out resistance behavior of the anchorage.

• 패션비즈니스
• /
• 제21권1호
• /
• pp.134-147
• /
• 2017

The purpose of this study is to analyze fashion brands' contents and characteristics of the participation platform of users, to assess the types and strategies of mass customization(MC). Most fashion brands sell one professional content: Shoes brands were the most common, followed by bags, unisex wear, and menswear. In consumer's design selection elements, changes in color and materials were the most common. For the personalization service elements, monogram service was the most common. The results of MC types analysis were as follows, Customized Standardization was the most common, followed by Tailored Customization, Pure Customization, and Segmented Standardization. For the types according to changes in products and expression methods, Cosmetic was the most common. And the classification according to modulation, Modularizers were the most common. For Creativity, brands in the making stage were the most common. For Flexibility, although brands different methods, high flexibility by modularizing design elements of products and accomplishing various design through participation. The Ease of use for various expression was generally high, parallel to Flexibility. For Durability, because consumers could receive end products only when they participated in the assembly stage in the on-line purchase, their continuous participation was not possible, so they participated only once. The typical types and strategy of MC were analyzed. The Customized Standardization type was the most common in shoes, bag, and womenswear brands. It was the Cosmetic type which could change colors and materials, the Modularizers, and had high Flexibility and Ease of use and low Durability.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.44-59
• /
• 2013

The modern people do express their personalities by appearance and actively use the appearance as the social tools, and the attractive appearance largely does influence the human relationship. As the appearance's importance is being magnified, the attractive appearance and favourable impression is an important standard for job performance and social position, and used as the way to reach the social goal. This study does investigate the design's kind and character of the beard which belongs to the male exclusive property and compare the differences of the impression's formation according to the beard design. The empirical results confirmed that the male beard design formated the various impressions according to the designs and their mutual relationship existed. Therefore, the beard is a symbol of maleness and an expression for the social position and personal character, whereas it possesses the very important meaning as the influencing factor on the impression's change. First, the pre stimuli were finished through the pre survey for composition of questionnaire in order to evaluate the impression after selection of experimental models and beard types for measuring instruments. Second, sixty three university students were surveyed by pre stimuli and questionnaire as pre experiment, and afterwards the measuring instruments and experimental design were revised. Third, the stimuli completed (nine beard designs) were intentionally well distributed as questionnaire by sex and ages in Seoul metropolitan and her environment. and the factorial analysis and the coefficient of Cronbach's ${\alpha}$ for reliability test were completed for questionnaire's validity using SPSS/PC+ Window Ver. 12.0.

• 한국전자거래학회지
• /
• 제16권4호
• /
• pp.221-239
• /
• 2011

스마트폰 시장의 확장과 함께 다양한 애플리케이션이 개발되고 있으며 이는 모바일광고의 형태 및 시장 변화에도 많은 영향을 미치고 있다. 기존의 모바일광고는 문자 기반의 푸쉬형 광고였지만 스마트폰 환경의 모바일광고는 애플리케이션에 덧붙여지는 배너형태 또는 광고 자체를 위하여 개발된 브랜디드앱의 형태로 변화하고 있다. 이에 따라 본 논문에서는 스마트폰 환경에서 모바일광고 태도에 영향을 미치는 요소들에 대하여 광고업계 종사자들과 사용자들의 관점에서 분석하여 비교해 보았다. 분석 결과는 모바일광고 사용자와 광고업계 종사자들 간에 광고 태도에 미치는 영향 요소에 대한 인식의 차이가 확연히 있음을 보여준다. 본 연구는 스마트폰 환경의 광고 제작 시 주로 고려되어야 하는 요인들을 제시하며 광고업계 종사자들이 광고제작 시 사용자의 입장을 충분하게 고려하여야 함을 보여주고 있다.

• 한국정보통신학회논문지
• /
• 제5권7호
• /
• pp.1272-1279
• /
• 2001

최근 공중통신망은 다양한 서비스 요구사항의 변화와 ATM, MPLS 및 DWDM 등의 새로운 전달망 기술의 발달과 같은 통신 파라다임의 변화로 인하여 개방형 구조의 초고속 통합 패킷 통신망 구조를 갖는 차세대 통신망으로 진화하고 있다. 그러나 차세대 통신망에서도 기존의 음성서비스는 통신사업자 관점에서 중요 서비스로 계속적인 기술 개발이 연구되고 있다. 본 논문에서는 차세대 통신망에 적용하여 기존의 음성서비스 백만 아니라 다양한 신규 서비스들을 수용할 수 있는 media gateway에서 효율적인 대역관리 방법을 제안한다.

• 한국수자원학회논문집
• /
• 제46권1호
• /
• pp.87-97
• /
• 2013

본 연구에서는 HEC-RAS의 하상변동모형을 이용하여 고농도의 유사가 중소규모의 저수지에 유입하여 삼각주를 형성하는 과정을 유사의 입도분포를 고려하여 해석하였으며, 다음과 같은 결론을 얻을 수 있었다. 먼저, 삼각주의 시공간적인 분포와 년간 저수지에 퇴적되는 입도별 퇴사량을 합리적으로 예측할 수 있었다. 또한 저수지의 특정위치에서 특정시기에 어떤 입도의 유사가 주로 퇴적되는지를 합리적으로 예측할 수 있었다. 이러한 유사의 입도분포를 고려한 모의와 분석은 수자원관련 시설물의 계획 및 유지관리에 필요한 유용한 정보를 제공해 줄 수 있을 것으로 판단된다.

• 한국주거학회논문집
• /
• 제20권2호
• /
• pp.11-18
• /
• 2009

After 2004, as the community mixed-support facility in Japan was admitted as a private business of public facilities based on the Special Law for Urban Regeneration, the community mixed-support facilities in Japan are developed into various types with the view of the urban regeneration and urban renewal, more different point of view, and a tendency of establishment of the community facility has been considerably changed for the past twenty years. The reasons of the change are the social demand for the reformation of facility and the modification of subsidy constitution according to the establishment of equal facility. Some examples of that are the construction of lifelong education community and the change into a equivalent society between male and female and the adjusting to the aging and the welfare society and the social situation of more consumption recently, and in order to emerge from former building system, new facilities related to the contents are being expanded. The complex of the community mixed-support facility has an advantage in that it supplies the services for the complex of the community mixed-support facility, constitutes the communal character and the sense of solidarity among residents and can lead the development of region through the exchange of regional information. Through the Japanese community mixed-support facility which has many cases of it, this study would recognize the suggestion, the feature of it and examine the complex types.

• 감성과학
• /
• 제13권1호
• /
• pp.91-102
• /
• 2010

본 연구는 디자인요소의 변화과정을 통해 제품디자인요소(product design factors)의 지배력 정도(dominant degree)를 실증적으로 분석하고 있다. 선행연구에서는 지배적 디자인에 대한 측정방법은 구체적으로 제시되었지만 장기간에 걸쳐 데이터를 확보하지 못한 한계점으로 시간의 흐름에 따른 지배적 디자인(dominant design)의 실증연구가 제시되지 않았다. 따라서 본 연구에서는 연도별 디자인 변화 데이터를 확보한 후 휴대폰의 디자인 지배력(dominance)과 지배구조(structure change)가 어떻게 변했는지를 측정해 보았다. 측정결과, 휴대폰 디자인요소 중 바디형태(body form)와 모서리(edge)는 지배력(dominance)이 점점 증가하여 각각 직사각형으로 라운드 모서리로 집중화(convergence)되는 경향인 지배적 디자인요소를 가지고 있었고, 버튼방식(button type), 개폐방식(open type), DMB여부, 영상통화여부, 컬러조합, 바디컬러는 지배력이 높았다가 감소되면서 디자인수준(design levels)이 분산화(divergence) 되는 경향을 가지고 있었다. 이렇게 제품디자인요소의 지배력 정도를 측정함으로써 마케팅 관리자나 디자이너들에게 급변하는 시장 상황에서 제품전략을 수립하는데 도움이 될 것이다. 본 연구는 지배적 디자인에 대한 실증연구를 통해 신제품 개발시 지배적 디자인 등장에 대비한 성공적인 제품 개발의 가이드라인을 제공하는데 도움이 될 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.304-305
• /
• 2018

최근 Industrial-IoT(IIoT) 솔루션은 2016년 기준 최대 55%를 차지하였고, 기술 혁신과 다양한 신규 비즈니스 모델이 개발되고 있다. 본 논문에서는 IIoT 디바이스를 다양한 환경에서 적용하고, 손쉽게 센서를 추가/변경/삭제하기 위해 블록형 IIoT 디바이스 연동이 가능한 온톨로지 시스템을 구현한다. 제안된 시스템은 IIoT 디바이스, 블록형 모듈과 온톨로지 서버로 구성되어있다. IIoT 디바이스에 블록형 모듈이 연결되면 온톨로지 서버를 통해 적합한 드라이버를 설치하고, 펌웨어를 다운로드한다. 블록이 추가/변경/삭제되어도 자동으로 업데이트가 가능하다. 실험을 통해 서버의 정상 구동과 소프트웨어의 업데이트 및 다운로드가 정상적으로 구현되는 것을 확인하였다.